The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
Urban building energy modeling (UBEM) tools: A state-of-the-art review of bottom-up physics-based approaches
Open accessAbstract
Abstract Regulations corroborate the importance of retrofitting existing building stocks or constructing new energy-efficient districts. There is, thus, a need for modeling tools to evaluate energy scenarios to better manage and design cities, and numerous methodologies and tools have been developed. Among them, Urban Building Energy Modelling (UBEM) tools allow the energy simulation of buildings at large scales. Choosing an appropriate UBEM tool, balancing the level of complexity, accuracy, usability, and computing needs, remains a challenge for users. The review focuses on the main bottom-up physics-based UBEM tools, comparing them from a user-oriented perspective. Five categories are used: (i) the required inputs, (ii) the reported outputs, (iii) the exploited workflow, (iv) the applicability of each tool, and (v) the potential users. Moreover, a critical discussion is proposed, focusing on interests and trends in research and development. The results highlighted major differences between UBEM tools that must be considered to choose the proper one for an application. Barriers of adoption of UBEM tools include the needs of a standardized ontology, a common three-dimensional city model, a standard procedure to collect data, and a standard set of test cases. This feeds into future development of UBEM tools to support cities’ sustainability goals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of end-use energy consumption in the residential sector: A review of modeling techniques
Swan, L. G., & Ugursal, V. I. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.09.033 · Cited by 1,934
Contrasting the capabilities of building energy performance simulation programs
Crawley, D. B., Hand, J. W., Kummert, M., & Griffith, B. T. (2008) · Building and Environment · doi:10.1016/j.buildenv.2006.10.027 · Cited by 1,858
Modelling radiation fluxes in simple and complex environments: basics of the RayMan model
Matzarakis, A., Rutz, F., & Mayer, H. (2010) · International Journal of Biometeorology · doi:10.1007/s00484-009-0261-0 · Cited by 1,633
Urban building energy modeling – A review of a nascent field
Reinhart, C. F., & Cerezo Davila, C. (2016) · Building and Environment · doi:10.1016/j.buildenv.2015.12.001 · Cited by 1,081
A review of bottom-up building stock models for energy consumption in the residential sector
Kavgic, M., Mavrogianni, A., Mumovic, D., Summerfield, A., Stevanovic, Z., & Djurovic-Petrovic, M. (2010) · Building and Environment · doi:10.1016/j.buildenv.2010.01.021 · Cited by 941
Ten questions on urban building energy modeling
Hong, T., Chen, Y., Luo, X., Luo, N., & Lee, S. H. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106508 · Cited by 658
Self-citationA review of urban energy system models: Approaches, challenges and opportunities
Keirstead, J., Jennings, M., & Sivakumar, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.02.047 · Cited by 641
Norman, J., MacLean, H. L., & Kennedy, C. A. (2006) · Journal of Urban Planning and Development · doi:10.1061/(asce)0733-9488(2006)132:1(10 · Cited by 612
Lindberg, F., Holmer, B., & Thorsson, S. (2008) · International Journal of Biometeorology · doi:10.1007/s00484-008-0162-7 · Cited by 574
A review of modelling approaches and tools for the simulation of district-scale energy systems
Allegrini, J., Orehounig, K., Mavromatidis, G., Ruesch, F., Dorer, V., & Evins, R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.123 · Cited by 521
Rethinking the role of occupant behavior in building energy performance: A review
Zhang, Y., Bai, X., Mills, F. P., & Pezzey, J. C. V. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.05.017 · Cited by 473
Spatial distribution of urban building energy consumption by end use
Howard, B., Parshall, L., Thompson, J., Hammer, S., Dickinson, J., & Modi, V. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2011.10.061 · Cited by 428
Bueno, B., Norford, L. K., Hidalgo, J., & Pigeon, G. (2012) · Journal of Building Performance Simulation · doi:10.1080/19401493.2012.718797 · Cited by 415
Chen, Y., Hong, T., & Piette, M. A. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.07.128 · Cited by 404
Self-citationUsing Mobile Positioning Data to Model Locations Meaningful to Users of Mobile Phones
Ahas, R., Silm, S., Järv, O., Saluveer, E., & Tiru, M. (2010) · Journal of Urban Technology · doi:10.1080/10630731003597306 · Cited by 393
Fonseca, J. A., Nguyen, T.-A., Schlueter, A., & Marechal, F. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2015.11.055 · Cited by 380
Microsimulation of Urban Development and Location Choices: Design and Implementation of UrbanSim
Waddell, P. A., Borning, A. H., Noth, M., Freier, N. G., Becke, M., & Úlfarsson, G. F. (2003) · Networks and Spatial Economics · doi:10.1023/a:1022049000877 · Cited by 371
Urban Multi-scale Environmental Predictor (UMEP): An integrated tool for city-based climate services
Lindberg, F., Grimmond, C. S. B., Gabey, A., Huang, B., Kent, C. W., Sun, T., Theeuwes, N. E., Järvi, L., Ward, H. C., Capel-Timms, I., et al. (2018) · Environmental Modelling & Software · doi:10.1016/j.envsoft.2017.09.020 · Cited by 368
Fonseca, J. A., & Schlueter, A. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.068 · Cited by 342
Bartesaghi Koc, C., Osmond, P., & Peters, A. (2018) · Solar Energy · doi:10.1016/j.solener.2018.03.008 · Cited by 335
TEASER: an open tool for urban energy modelling of building stocks
Remmen, P., Lauster, M., Mans, M., Fuchs, M., Osterhage, T., & Müller, D. (2018) · Journal of Building Performance Simulation · doi:10.1080/19401493.2017.1283539 · Cited by 323
Modeling urban building energy use: A review of modeling approaches and procedures
Li, W., Zhou, Y., Cetin, K., Eom, J., Wang, Y., Chen, G., & Zhang, X. (2017) · Energy · doi:10.1016/j.energy.2017.11.071 · Cited by 315
Cerezo Davila, C., Reinhart, C. F., & Bemis, J. L. (2016) · Energy · doi:10.1016/j.energy.2016.10.057 · Cited by 307
Integration of LCA and LCC analysis within a BIM-based environment
Santos, R., Costa, A. A., Silvestre, J. D., & Pyl, L. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.02.011 · Cited by 306
Building-stock aggregation through archetype buildings: France, Germany, Spain and the UK
Mata, É., Sasic Kalagasidis, A., & Johnsson, F. (2014) · Building and Environment · doi:10.1016/j.buildenv.2014.06.013 · Cited by 278
Sokol, J., Cerezo Davila, C., & Reinhart, C. F. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2016.10.050 · Cited by 270
Mauree, D., Naboni, E., Coccolo, S., Perera, A. T. D., Nik, V. M., & Scartezzini, J.-L. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.06.005 · Cited by 237
A supporting method for defining energy strategies in the building sector at urban scale
Caputo, P., Costa, G., & Ferrari, S. (2013) · Energy Policy · doi:10.1016/j.enpol.2012.12.006 · Cited by 234
A review on occupant behavior in urban building energy models
Happle, G., Fonseca, J. A., & Schlueter, A. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.06.030 · Cited by 234
Methodologies and Advancements in the Calibration of Building Energy Models
Fabrizio, E., & Monetti, V. (2015) · Energies · doi:10.3390/en8042548 · Cited by 233
A revival of the autoregressive distributed lag model in estimating energy demand relationships
Bentzen, J., & Engsted, T. (2001) · Energy · doi:10.1016/s0360-5442(00)00052-9 · Cited by 233
Modeling the heating and cooling energy demand of urban buildings at city scale
Frayssinet, L., Merlier, L., Kuznik, F., Hubert, J.-L., Milliez, M., & Roux, J.-J. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.06.040 · Cited by 233
van Vuuren, D. P., Hoogwijk, M. M., Barker, T., Riahi, K., Boeters, S., Château, J., Scrieciu, Ş., van Vliet, J., Masui, T., Blok, K., et al. (2009) · Energy Policy · doi:10.1016/j.enpol.2009.07.024 · Cited by 230
Mastrucci, A., Baume, O., Stazi, F., & Leopold, U. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.02.032 · Cited by 229
Baetens, R., De Coninck, R., Van Roy, J., Verbruggen, B., Driesen, J., Helsen, L., & Saelens, D. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.098 · Cited by 226
Yang, J., Santamouris, M., & Lee, S. E. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2015.12.019 · Cited by 226
Critical review of life cycle assessment (LCA) for the built environment at the neighborhood scale
Lotteau, M., Loubet, P., Pousse, M., Dufrasnes, E., & Sonnemann, G. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.06.029 · Cited by 223
Dogan, T., & Reinhart, C. F. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.01.030 · Cited by 183
Dall’O’, G., Galante, A., & Pasetti, G. (2012) · Sustainable Cities and Society · doi:10.1016/j.scs.2012.01.004 · Cited by 178
Waddell, P. (2000) · Environment and Planning B: Planning and Design · doi:10.1068/b2627 · Cited by 172
Development and evaluation of a building energy model integrated in the TEB scheme
Bueno, B., Pigeon, G., Norford, L. K., Zibouche, K., & Marchadier, C. (2012) · Geoscientific Model Development · doi:10.5194/gmd-5-433-2012 · Cited by 172
SUNtool – A new modelling paradigm for simulating and optimising urban sustainability
Robinson, D., Campbell, N., Gaiser, W., Kabel, K., Le-Mouel, A., Morel, N., Page, J., Stankovic, S., & Stone, A. (2007) · Solar Energy · doi:10.1016/j.solener.2007.06.002 · Cited by 171
Agugiaro, G., Benner, J., Cipriano, P., & Nouvel, R. (2018) · Open Geospatial Data Software and Standards · doi:10.1186/s40965-018-0042-y · Cited by 162
Stephan, A., Crawford, R. H., & de Myttenaere, K. (2013) · Building and Environment · doi:10.1016/j.buildenv.2013.06.003 · Cited by 159
Salimi, S., & Hammad, A. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.10.007 · Cited by 156
Heeren, N., Jakob, M., Martius, G., Gross, N., & Wallbaum, H. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.064 · Cited by 131
Hierarchical calibration of archetypes for urban building energy modeling
Kristensen, M. H., Hedegaard, R. E., & Petersen, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.07.030 · Cited by 126
An, J., Yan, D., & Hong, T. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.06.035 · Cited by 120
Self-citationLi, J., Yu, Z. J., Haghighat, F., & Zhang, G. (2019) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101685 · Cited by 120
Quantifying the impact of urban climate by extending the boundaries of urban energy system modeling
Perera, A. T. D., Coccolo, S., Scartezzini, J., & Mauree, D. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.004 · Cited by 117
Assessment of tools for urban energy planning
Ferrari, S., Zagarella, F., Caputo, P., & Bonomolo, M. (2019) · Energy · doi:10.1016/j.energy.2019.04.054 · Cited by 117
Wang, Y., Ni, Z., Peng, Y., & Xia, B. (2018) · Urban forestry & urban greening · doi:10.1016/j.ufug.2018.04.005 · Cited by 114
Causone, F., Carlucci, S., Ferrando, M., Marchenko, A., & Erba, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.109342 · Cited by 99
Self-citationCityComfort+: A simulation-based method for predicting mean radiant temperature in dense urban areas
Huang, J., Laurent, J. G. C., & Spengler, J. D. (2014) · Building and Environment · doi:10.1016/j.buildenv.2014.05.019 · Cited by 95
Multi-scale modelling to evaluate building energy consumption at the neighbourhood scale
Mauree, D., Coccolo, S., Kämpf, J. H., & Scartezzini, J. (2017) · PLoS ONE · doi:10.1371/journal.pone.0183437 · Cited by 86
Nageler, P. J., Koch, A., Mauthner, F., Leusbrock, I., Mach, T., Hochenauer, C., & Heimrath, R. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.09.034 · Cited by 80
Nichols, B. G., & Kockelman, K. M. (2014) · Energy Policy · doi:10.1016/j.enpol.2013.12.062 · Cited by 76
Ciancio, V., Falasca, S., Golasi, I., Curci, G., Coppi, M., & Salata, F. (2018) · Energies · doi:10.3390/en11102835 · Cited by 75
The effect of weather datasets on building energy simulation outputs
Erba, S., Causone, F., & Armani, R. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.09.561 · Cited by 74
Self-citationSimulating external longwave radiation exchange for buildings
Evins, R., Dorer, V., & Carmeliet, J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.02.030 · Cited by 71
Extracting typical occupancy data of different buildings from mobile positioning data
Gu, J., Xu, P., Pang, Z., Chen, Y., Ji, Y., & Chen, Z. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.09.002 · Cited by 71
Self-citationYaghoobian, N., & Kleissl, J. P. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.07.019 · Cited by 70
Li, D., & Wang, R. (2009) · Ecological Complexity · doi:10.1016/j.ecocom.2009.09.002 · Cited by 65
Wang, Q., & Taylor, J. E. (2015) · Journal of Computing in Civil Engineering · doi:10.1061/(asce)cp.1943-5487.0000469 · Cited by 64
Workflow automation for combined modeling of buildings and district energy systems
Fuchs, M., Teichmann, J., Lauster, M., Remmen, P., Streblow, R., & Müller, D. (2016) · Energy · doi:10.1016/j.energy.2016.04.023 · Cited by 62
Results of a literature review on methods for estimating buildings energy demand at district level
Ferrari, S., Zagarella, F., Caputo, P., & D’Amico, A. (2019) · Energy · doi:10.1016/j.energy.2019.03.172 · Cited by 61
Expanding the use of life-cycle assessment to capture induced impacts in the built environment
Anderson, J. E., Wulfhorst, G., & Lang, W. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.08.008 · Cited by 57
A Case Study in Digital Government
Waddell, P. A., & Borning, A. H. (2004) · Social Science Computer Review · doi:10.1177/0894439303259882 · Cited by 57
Mauree, D., Coccolo, S., Perera, A. T. D., Nik, V., Scartezzini, J., & Naboni, E. (2018) · Sustainability · doi:10.3390/su10041134 · Cited by 56
Cooling potential of greening in the urban environment, a step further towards practice
Coccolo, S., Kämpf, J. H., Mauree, D., & Scartezzini, J. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.01.019 · Cited by 56
Seasonal effects of input parameters in urban-scale building energy simulation
Mosteiro-Romero, M., Fonseca, J. A., & Schlueter, A. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.07.459 · Cited by 46
Life cycle building impact of a Middle Eastern residential neighborhood
Wolf, C. D., Davila, C. C., Murtadhawi, Z., Hajiah, A. E., Al-Mumin, A. A., Ochsendorf, J., & Reinhart, C. F. (2017) · Energy · doi:10.1016/j.energy.2017.06.026 · Cited by 34
Naber, E., Volk, R., & Schultmann, F. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.04.307 · Cited by 25
Cited by
Ahmad, T., Madonski, R., Zhang, D., Huang, C., & Mujeeb, A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112128 · Cited by 711
Qian, Y., Chakraborty, T. C., Li, J., Li, D., He, C., Sarangi, C., Chen, F., Yang, X., & Leung, L. R. (2022) · Advances in Atmospheric Sciences · doi:10.1007/s00376-021-1371-9 · Cited by 362
Darvishvand, L., Kamkari, B., Huang, M. J., & Hewitt, N. J. (2025) · Sustainable Cities and Society · doi:10.1016/j.scs.2025.106492 · Cited by 42
Metadata
- Authors
- Ferrando, M., Causone, F., Hong, T., & Chen, Y.
- Venue
- Sustainable Cities and Society
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 62
- Pages
- 102408
- ISSN
- 2210-6707 (ISSN-L)
- OpenAlex
- W3042542258
- Cited by
- 379
- References
- 73
- FWCI
- 17.31
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.