Assessing and calibrating the ATR-FTIR approach as a carbonate rock characterization tool
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
ATR-FTIR (attenuated total reflectance Fourier transform infrared) spectroscopy can be used as a rapid and economical tool for qualitative identification of carbonates, calcium sulphates, oxides and silicates, as well as quantitatively estimating the concentration of minerals. Over 200 powdered samples with known concentrations of two, three, four and five phase mixtures were made, then a suite of calibration curves were derived that can be used to quantify the minerals. The calibration curves in this study have an R 2 that range from 0.93–0.99, a RMSE (root mean square error) of 1-5 wt.% and a maximum error of 3–10 wt.%. The calibration curves were used on 35 geological samples that have previously been studied using XRD (X-ray diffraction). The identification of the minerals using ATR-FTIR is comparable with XRD and the quantitative results have a RMSD (root mean square deviation) of 14% and 12% for calcite and dolomite respectively when compared to XRD results. ATR-FTIR is a rapid technique (identification and quantification takes < 5 min) that involves virtually no cost if the machine is available. It is a common tool in most analytical laboratories, but it also has the potential to be deployed on a rig for real-time data acquisition of the mineralogy of cores and rock chips at the surface as there is no need for special sample preparation, rapid data collection and easy analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Weir, C. E., & Lippincott, E. R. (1961) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.065a.021 · Cited by 202
Vandeginste, V., John, C. M., van de Flierdt, T., & Cosgrove, J. W. (2013) · AAPG Bulletin · doi:10.1306/11011212076 · Cited by 32
Self-citation
Cited by
Santos, V. H. J. M. D., Pontin, D., Ponzi, G. G. D., Stepanha, A. S. D. G. E., Martel, R. B., Schütz, M. K., Einloft, S. M. O., & Dalla Vecchia, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125413 · Cited by 275
Kim, Y., Caumon, M.-C., Barres, O., Sall, A., & Cauzid, J. (2021) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2021.119980 · Cited by 134
Adlan, Q., & John, C. M. (2023) · Chemical Geology · doi:10.1016/j.chemgeo.2022.121245 · Cited by 8
Self-citationAdlan, Q., Kaczmarek, S., & John, C. (2023) · Minerals · doi:10.3390/min13121466 · Cited by 6
Self-citation
Metadata
- Authors
- Henry, D. G., Watson, J. S., & John, C. M.
- Venue
- Sedimentary Geology
- Publisher
- Elsevier BV
- Published
- 2017-01
- Volume
- 347
- Pages
- 36-52
- ISSN
- 0037-0738 (ISSN-L)
- OpenAlex
- W2521214762
- Cited by
- 85
- References
- 2
- FWCI
- 4.15
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.