The pilot dual-reflux vacuum pressure swing adsorption unit for CO2 capture from flue gas
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The results of carbon dioxide separation from real flue gas using the dual-reflux vacuum pressure swing adsorption (DR-VPSA) technology have been presented. The mobile pilot CO 2 separation plant consists of two containers: a processing container and a control container. The processing container includes a flue gas treatment section (which comprises dust removal, cooling, deSO x , deNO x , gas drying and compression units), as well as a CO 2 adsorptive separation unit. The adsorption unit is made up of four fixed-bed columns, each divided into two sections, operating in a dual-reflux vacuum pressure swing adsorption mode. Two kinds of activated carbon in the total amount of 540 kg were used as the beds filling. The results from the 8-step reference process with no partition of the adsorbers into the upper and lower sections (as one-step separation process with partial product recirculation), and from the 9-step DR-VPSA process (as two-step separation process) with a division of the adsorbers are presented. In the measurement campaign three different feed gas flow rates and five different times of adsorption step were selected to assess their influence on separation results. The results show the optimal parameters of 100 Nm 3 /h for feed gas flow rate and 300 sec for adsorption step time for both mentioned processes. The 87.5% of purity, 44.6% of recovery, 11.4 kg/(m 3 h) of productivity and 978 kWh/Mg CO2 of energy demand for gas compression and vacuum evacuation in the case of optimal parameters of 9-step DR-VPSA technology were obtained. Additionally the results from measurement campaign were compared with those reported by other researchers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Cited by
Industrial carbon dioxide capture and utilization: state of the art and future challenges
Gao, W., Liang, S., Wang, R., Jiang, Q., Zhang, Y., Zheng, Q., Xie, B., Toe, C. Y., Zhu, X., Wang, J., et al. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00025f · Cited by 1,388
Plaza, M. G., & Rubiera, F. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.079 · Cited by 53
Plaza, M. G., & Rubiera, F. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122002 · Cited by 39
Wawrzyńczak, D., Panowski, M., & Majchrzak-Kucęba, I. (2019) · Energy · doi:10.1016/j.energy.2019.05.068 · Cited by 30
Self-citation
Metadata
- Authors
- Wawrzyńczak, D., Majchrzak-Kucęba, I., Srokosz, K., Kozak, M., Nowak, W., Zdeb, J., Smółka, W., & Zajchowski, A.
- Venue
- Separation and Purification Technology
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 209
- Pages
- 560-570
- ISSN
- 1383-5866 (ISSN-L)
- OpenAlex
- W2886943130
- Cited by
- 77
- References
- 2
- FWCI
- 4.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.