The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
A review on microwave pyrolysis of lignocellulosic biomass
Open accessAbstract
This article briefly reviews the technique of lignocellulosic biomass pyrolysis by using microwave heating. Lignocellulosic biomass, such as crops, wood, agricultural and forestry residues, is a major biomass resource and has been recognized as a sustainable feedstock for the production of bioenergy and green materials. Microwave heating can be better than conventional heating because of various advantages. Hot spots, which form under microwave irradiation, would have significant influence on the yield and characteristics of microwave processing products. The solid products of microwave pyrolysis at proper microwave power levels can have high heating values and specific surface areas with higher gas and solid yields but lower liquid yield than conventional pyrolysis. By using microwave pyrolysis, almost half of lignocellulosic biomass can be converted into gas product, which is mainly composed of H2, CH4, CO, and CO2, with more bioenergy because of its high H2 and CO yields. The addition of proper catalysts provides substantial influence on the product selectivity of microwave pyrolysis. The gas and liquid yields as well as the heating performance of microwave pyrolysis can be dramatically promoted by adding catalysts. The activation energy and pre-exponential factor of microwave pyrolysis are much lower than those of conventional pyrolysis, revealing that the reaction kinetics for the two methods could be different. According to various advantages, microwave pyrolysis of lignocellulosic biomass can be a promising bioenergy technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetic Parameters from Thermogravimetric Data
COATS, A. W., & REDFERN, J. P. (1964) · Nature · doi:10.1038/201068a0 · Cited by 6,930
The Path Forward for Biofuels and Biomaterials
Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Hallett, J. P., Leak, D. J., Liotta, C. L., et al. (2006) · Science · doi:10.1126/science.1114736 · Cited by 5,741
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Biomass Recalcitrance: Engineering Plants and Enzymes for Biofuels Production
Himmel, M. E., Ding, S.-Y., Johnson, D. K., Adney, W. S., Nimlos, M. R., Brady, J. W., & Foust, T. D. (2007) · Science · doi:10.1126/science.1137016 · Cited by 4,533
Overview of Applications of Biomass Fast Pyrolysis Oil
Czernik, S., & Bridgwater, A. V. (2004) · Energy & Fuels · doi:10.1021/ef034067u · Cited by 2,880
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Energy production from biomass (part 2): conversion technologies
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00119-5 · Cited by 2,042
An overview of fast pyrolysis of biomass
Bridgwater, A. V., Meier, D., & Radlein, D. (1999) · Organic Geochemistry · doi:10.1016/s0146-6380(99)00120-5 · Cited by 1,752
Fast pyrolysis processes for biomass
Bridgwater, A. (2000) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(99)00007-6 · Cited by 1,751
Beneficial biofuels—the food, energy, and environment trilemma
Tilman, D., Socolow, R., Foley, J. A., Hill, J., Larson, E., Lynd, L., Pacala, S., Reilly, J., Searchinger, T., Somerville, C., et al. (2009) · Science · doi:10.1126/science.1177970 · Cited by 1,596
Cited by
Emerging technologies for the pretreatment of lignocellulosic biomass
Hassan, S. S., Williams, G. A., & Jaiswal, A. K. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.04.099 · Cited by 835
Potential of pyrolysis processes in the waste management sector
Czajczyńska, D., Anguilano, L., Ghazal, H., Krzyżyńska, R., Reynolds, A. J., Spencer, N., & Jouhara, H. (2017) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2017.06.003 · Cited by 531
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Production, activation, and applications of biochar in recent times
Sakhiya, A. K., Anand, A., & Kaushal, P. (2020) · Biochar · doi:10.1007/s42773-020-00047-1 · Cited by 497
Ionic liquid based pretreatment of lignocellulosic biomass for enhanced bioconversion
Usmani, Z., Sharma, M., Gupta, P., Karpichev, Y., Gathergood, N., Bhat, R., & Gupta, V. K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123003 · Cited by 404
Metadata
- Authors
- Huang, Y.-F., Chiueh, P.-T., & Lo, S.-L.
- Venue
- Sustainable Environment Research
- Published
- 2016-05
- Volume
- 26
- Issue
- 3
- Pages
- 103-109
- ISSN
- 2468-2039 (ISSN-L)
- OpenAlex
- W2343250413
- Cited by
- 317
- References
- 59
- FWCI
- 9.88
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review on microwave pyrolysis of lignocellulosic biomass. https://app.cochat.ai/papers/10.1016/j.serj.2016.04.012
- The paper
- Huang, Y.-F., Chiueh, P.-T., & Lo, S.-L. (2016). A review on microwave pyrolysis of lignocellulosic biomass. Sustainable Environment Research. https://doi.org/10.1016/j.serj.2016.04.012
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.