CoChat

Theoretical modeling and analysis of mechanical impact driven and frequency up-converted piezoelectric energy harvester for low-frequency and wide-bandwidth operation

Open access
Halim, Miah A., Park, Jae Y. · 2014 · Sensors and Actuators A: Physical
Cited by 153

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Vibration energy harvesters are capable of generating significant amount of power at higher frequencies rather than generating at low frequencies. Moreover, as low frequency vibrations (1–30 Hz) around the ambient environment are discursive in nature, resonance based power generators are limited to use within this low frequency range. In this paper, a mechanical impact driven and frequency up-converted wide-bandwidth piezoelectric vibration energy harvester has been proposed and demonstrated theoretically and experimentally. It converts low frequency environmental vibrations into high frequency vibration by mechanical impact. A low frequency flexible driving beam with horizontally extended tip mass, upon excitation, hits two high frequency rigid piezoelectric generating beams at the same time causing a change in the driving beam's effective stiffness that allows the device to offer approximately 180% increased −3 dB bandwidth and more than 62% of the maximum power generation within the remaining operating frequency range as well. The overall bandwidth is 7.5 Hz within 7–14.5 Hz frequency range generating a minimum peak power of 233 μW. A maximum of 378 μW peak power from one generating beam is achieved under 6 ms−2 acceleration at the resonant frequency of 14.5 Hz. Output of both generating beams connected in series produces 734 μW peak power under the same operating condition with the corresponding power density 38.8 μW cm−3. The experimental results show some discrepancy with the theoretical results due to mechanical loss during impact and the process variations in the beam formation and assembling. The theoretical and experimental results reveal that the proposed configuration has the potential of powering small portable, handheld wireless smart devices from low frequency, specially human motion related vibrations.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.sna.2013.12.033

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 153

Metadata

Authors
Halim, M. A., & Park, J. Y.
Venue
Sensors and Actuators A: Physical
Publisher
Elsevier BV
Published
2014-02
Volume
208
Pages
56-65
ISSN
0924-4247 (ISSN-L)
OpenAlex
W2065117149
Cited by
153
References
1
FWCI
12.47
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.