Design and Evaluation of Double-Stage Energy Harvesting Floor Tile
Open accessThe DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
This paper introduces the design and characterization of a double-stage energy harvesting floor tile that uses a piezoelectric cantilever to generate electricity from human footsteps. A frequency up-conversion principle, in the form of an overshooting piezoelectric cantilever, plucked with a proof mass is utilized to increase energy conversion efficiency. The overshoot of the proof mass is implemented by a mechanical impact between a moving cover plate and a stopper to prevent damage to the plucked piezoelectric element. In an experiment, the piezoelectric cantilever of a floor tile prototype was excited by a pneumatic actuator that simulated human footsteps. The key parameters affecting the electrical power and energy outputs were investigated by actuating the prototype with a few kinds of excitation input. It was found that, when actuated by a single simulated footstep, the prototype was able to produce electrical power and energy in two stages. The cantilever resonated at a frequency of 14.08 Hz. The output electricity was directly proportional to the acceleration of the moving cover plate and the gap between the cover plate and the stopper. An average power of 0.82 mW and a total energy of 2.40 mJ were obtained at an acceleration of 0.93 g and a gap of 4 mm. The prototype had a simple structure and was able to operate over a wide range of frequencies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures











Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“A similar type of arrangement was employed by Isarakorn et al. [73,74] for designing a double stage energy harvesting floor tile.”
From A review of piezoelectric energy harvesting tiles: Available designs and future perspective (2022) · cites this paper as [74]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819 · cited 1×
“conversion efficiency with its simple structure [14,15].”
A piezoelectric vibration based generator for wireless electronics
Roundy, S., & Wright, P. K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/5/018 · Cited by 1,818 · cited 3×
“where mw is the weight of the proof mass; F1K is the restoring force of the piezoelectric cantilever in this deflection [14]; keff is the effective spring constant of the piezoelectric cantilever; and d1 and θ1 are the tip displacement of the piezoelectric cantilever and the top surface angle of the proof mass in this…”
BackgroundVullers, R. J. M., van Schaijk, R., Doms, I., Van Hoof, C., & Mertens, R. (2009) · Solid-State Electronics · doi:10.1016/j.sse.2008.12.011 · Cited by 886
An electromagnetic, vibration-powered generator for intelligent sensor systems
Glynne-Jones, P., Tudor, M. J., Beeby, S. P., & White, N. M. (2004) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2003.09.045 · Cited by 773
MEMS electrostatic micropower generator for low frequency operation
Mitcheson, P. D., Miao, P., Stark, B. H., Yeatman, E. M., Holmes, A. S., & Green, T. C. (2004) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.04.026 · Cited by 593
Pillatsch, P., Yeatman, E. M., & Holmes, A. S. (2014) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2013.10.003 · Cited by 335
FREQUENCY AND VELOCITY OF PEOPLE WALKING
Pachi, A., & Ji, T. (2005) · The Structural Engineer · Cited by 321
Photovoltaic solar cells: An overview of state-of-the-art cell development and environmental issues
Miles, R. W., Hynes, K. M., & Forbes, I. (2005) · Progress in Crystal Growth and Characterization of Materials · doi:10.1016/j.pcrysgrow.2005.10.002 · Cited by 302
Low-frequency piezoelectric energy harvesting prototype suitable for the MEMS implementation
Gu, L. (2011) · Microelectronics Journal · doi:10.1016/j.mejo.2010.10.007 · Cited by 163
Cited by
A Systematic Review of Piezoelectric Materials and Energy Harvesters for Industrial Applications
Aabid, A., Raheman, M. A., Ibrahim, Y. E., Anjum, A., Hrairi, M., Parveez, B., Parveen, N., & Mohammed Zayan, J. (2021) · Sensors · doi:10.3390/s21124145 · Cited by 191
“Hence, the gap width should be optimized between high energy generation and comfortable walking [109].”
BackgroundA review of piezoelectric energy harvesting tiles: Available designs and future perspective
Sharma, S., Kiran, R., Azad, P., & Vaish, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115272 · Cited by 194
Recent Research Progress in Piezoelectric Vibration Energy Harvesting Technology
Zhou, W., Du, D., Cui, Q., Lu, C., Wang, Y., & He, Q. (2022) · Energies · doi:10.3390/en15030947 · Cited by 84
Impact-Driven Energy Harvesting: Piezoelectric Versus Triboelectric Energy Harvesters
Thainiramit, P., Yingyong, P., & Isarakorn, D. (2020) · Sensors · doi:10.3390/s20205828 · Cited by 64
“[13] investigated the behavior of double-stage energy harvesting floor tile.”
BackgroundMethodSelf-citationEvaluation of harvesting energy from pedestrians using piezoelectric floor tile energy harvester
Yingyong, P., Thainiramit, P., Jayasvasti, S., Thanach-Issarasak, N., & Isarakorn, D. (2021) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2021.113035 · Cited by 43
Self-citation
Metadata
- Authors
- Isarakorn, D., Jayasvasti, S., Panthongsy, P., Janphuang, P., & Hamamoto, K.
- Affiliations
- King Mongkut's Institute of Technology Ladkrabang (TH)
- Synchrotron Light Research Institute (TH)
- Tokai University (JP)
- Corresponding author
- Isarakorn, Don
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-10-10
- Volume
- 11
- Issue
- 20
- Pages
- 5582
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2979531838
- Cited by
- 27
- References
- 30
- Citations by year
- 2025: 1 · 2024: 2 · 2023: 8 · 2022: 6 · 2021: 4 · 2020: 6
- FWCI
- 2.25
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang (2562-02-01-022)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Energy › Nuclear Energy and Engineering › Advanced Energy Technologies and Civil Engineering Innovations
- Keywords
- piezoelectric cantilever, human footsteps, frequency up-conversion, mechanical impact, resonant frequency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design and Evaluation of Double-Stage Energy Harvesting Floor Tile. https://app.cochat.ai/papers/10.3390/su11205582
- The paper
- Isarakorn, D., Jayasvasti, S., Panthongsy, P., Janphuang, P., & Hamamoto, K. (2019). Design and Evaluation of Double-Stage Energy Harvesting Floor Tile. Sustainability. https://doi.org/10.3390/su11205582
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.