Bi-resonant structure with piezoelectric PVDF films for energy harvesting from random vibration sources at low frequency
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
This paper reports on a bi-resonant structure of piezoelectric PVDF films energy harvester (PPEH), which consists of two cantilevers with resonant frequencies of 15 Hz and 22 Hz. With increased acceleration, the vibration amplitudes of the two cantilever-mass structures are increased and collision occurs which causes strong mechanical coupling between the two subsystems. The experimental results show that the operating bandwidth is widened to 14 Hz (14–28 Hz) at an acceleration of 9.81 m/s2, and the peak output power can be 0.35 μW at a relatively low operation frequency of 16 Hz. Simulation and experiments with piezoelectric elements show that the energy harvesting device with the bi-resonant structure can generate higher power output than that of the sum of the two separate devices from random vibration sources at low frequency, and hence significantly improves the vibration-to- electricity conversion efficiency by 40–81%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
Cited by
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“Various broadband and nonlinear piezoelectric harvester designs including (a) two impacting beams (reprinted from [195], Copyright 2016, with permission from Elsevier), (b) harvester on acoustic black hole (reproduced from [196].”
BackgroundProperties and Applications of the β Phase Poly(vinylidene fluoride)
Ruan, L., Yao, X., Chang, Y., Zhou, L., Qin, G., & Zhang, X. (2018) · Polymers · doi:10.3390/polym10030228 · Cited by 824
Costa, C. M., Cardoso, V. F., Martins, P., Correia, D. M., Gonçalves, R., Costa, P., Correia, V., Ribeiro, C., Fernandes, M. M., Martins, P. M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00196 · Cited by 498
Micro electrostatic energy harvester with both broad bandwidth and high normalized power density
Zhang, Y., Wang, T., Luo, A., Hu, Y., Li, X., & Wang, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.053 · Cited by 423
Self-citationPVDF‐based dielectric polymers and their applications in electronic materials
Xia, W., & Zhang, Z. (2018) · IET Nanodielectrics · doi:10.1049/iet-nde.2018.0001 · Cited by 346
Metadata
- Authors
- Li, S., Crovetto, A., Peng, Z., Zhang, A., Hansen, O., Wang, M., Li, X., & Wang, F.
- Venue
- Sensors and Actuators A: Physical
- Publisher
- Elsevier BV
- Published
- 2016-08
- Volume
- 247
- Pages
- 547-554
- ISSN
- 0924-4247 (ISSN-L)
- OpenAlex
- W2465489390
- Cited by
- 124
- References
- 2
- FWCI
- 17.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bi-resonant structure with piezoelectric PVDF films for energy harvesting from random vibration sources at low frequency. https://app.cochat.ai/papers/10.1016/j.sna.2016.06.033
- The paper
- Li, S., Crovetto, A., Peng, Z., Zhang, A., Hansen, O., Wang, M., Li, X., & Wang, F. (2016). Bi-resonant structure with piezoelectric PVDF films for energy harvesting from random vibration sources at low frequency. Sensors and Actuators A: Physical. https://doi.org/10.1016/j.sna.2016.06.033
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.