The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Design of Au@WO3 core−shell structured nanospheres for ppb-level NO2 sensing
Abstract
Abstract As motivated by the driving force of the urgent demand for high-performance nitrogen dioxide (NO2) sensor, in this work, a novel structure of Au@WO3 core–shell nanospheres (CSNSs) was designed and successfully prepared for NO2 detection. The techniques of X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller measurement, and elemental mapping analysis were used for the characterizations of the obtained samples. The results demonstrated that Au nanoparticles with 25–50 nm in diameter were successfully encapsulated by WO3 shells with the thickness of 30–50 nm. The NO2 sensing performance of the Au@WO3 CSNSs as well as the pure WO3 nanospheres were systematically investigated. Compared with the pure WO3 nanospheres, Au@WO3 CNNSs exhibited overall enhanced NO2 sensing performances in terms of response, detection limit, and response/recovery times. At the optimal operating temperature of 100 °C, Au@WO3 CSNSs showed excellent NO2 selectivity and long-term stability. Notably, the excellent NO2 sensing performance of Au@WO3 CSNSs was slightly affected by humidity. The possible sensing mechanism of the enhanced NO2 sensing properties of the Au@WO3 CSNSs was discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High Surface Area MoS 2 /Graphene Hybrid Aerogel for Ultrasensitive NO 2 Detection
Long, H., Harley‐Trochimczyk, A., Pham, T., Tang, Z., Shi, T., Zettl, A., Carraro, C., Worsley, M. A., & Maboudian, R. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601562 · Cited by 479
Three-Dimensional Crumpled Graphene-Based Nanosheets with Ultrahigh NO 2 Gas Sensibility
Chen, Z., Wang, J., Umar, A., Wang, Y., Li, H., & Zhou, G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01229 · Cited by 120
Cited by
Gas sensing mechanisms of metal oxide semiconductors: a focus review
Ji, H., Zeng, W., & Li, Y. (2019) · Nanoscale · doi:10.1039/c9nr07699a · Cited by 1,108
A review on WO3 based gas sensors: Morphology control and enhanced sensing properties
Dong, C., Zhao, R., Yao, L., Ran, Y., Zhang, X., & Wang, Y. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153194 · Cited by 434
Metal oxide gas sensors for detecting NO2 in industrial exhaust gas: Recent developments
Li, Q., Zeng, W., & Li, Y. (2022) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2022.131579 · Cited by 422
Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
Wang, D., Zhang, D., Guo, J., Hu, Y., Yang, Y., Sun, T., Zhang, H., & Liu, X. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106410 · Cited by 359
Metadata
- Authors
- Zhao, S., Shen, Y., Zhou, P., Zhong, X., Han, C., Zhao, Q., & Wei, D.
- Venue
- Sensors and Actuators B: Chemical
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 282
- Pages
- 917-926
- ISSN
- 0925-4005 (ISSN-L)
- OpenAlex
- W2902996045
- Cited by
- 247
- References
- 2
- FWCI
- 8.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of Au@WO3 core−shell structured nanospheres for ppb-level NO2 sensing. https://app.cochat.ai/papers/10.1016/j.snb.2018.11.142
- The paper
- Zhao, S., Shen, Y., Zhou, P., Zhong, X., Han, C., Zhao, Q., & Wei, D. (2019). Design of Au@WO3 core−shell structured nanospheres for ppb-level NO2 sensing. Sensors and Actuators B: Chemical. https://doi.org/10.1016/j.snb.2018.11.142
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.