The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
An acetone gas sensor based on nanosized Pt-loaded Fe2O3 nanocubes
Abstract
Abstract Nanosized Pt-loaded Fe2O3 nanocubes are prepared through, successively, a simple hydrothermal reaction, two-step annealing process and finally reduction with NaBH4 of H2PtCl4. The resultant Pt decorated Fe2O3 nanocubes, made up of Fe2O3 nanoplatelets, are hierarchical, hollow and porous, with an average edge length of 200–300 nm. The sensor based on Pt decorated Fe2O3 nanocomposites exhibits higher response (Rair/Rgas = 25.7) to 100 ppm of acetone gas at lower temperature (139 °C), with a short response-recovery time (3 s/22 s), compared with pure Fe2O3 nanocubes sensor. The Pt-Fe2O3 nanocomposite sensor shows excellent potential to act as a low cost, low temperature sensor for acetone gas, with high acetone selectivity under high humidity conditions and with the interference of other gases. Under various environmental conditions designed to mimic exhaled air, the sensor is able to detect ppb amounts of acetone, with high repeatability and stability, making it suitable for applications such as oral diabetic sensors. The attractive chemical and electronic sensitizations of partially oxidized Pt nanoparticles are responsible for the enhancement of acetone sensing performance. Based on the high acetone selectivity, high stability and fast dynamic response, the Pt enhanced Fe2O3 nanocubes sensor is an exceptionally suitable candidate for a low cost acetone sensor, and the proposed approach provides a route to develop gas sensors that can operate at low temperatures for a wide variety of applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds
Grosvenor, A. P., Kobe, B. A., Biesinger, M. C., & McIntyre, N. S. (2004) · Surface and Interface Analysis · doi:10.1002/sia.1984 · Cited by 3,725
X-ray photoelectron spectroscopic studies of iron oxides
McIntyre, N. S., & Zetaruk, D. G. (1977) · Analytical Chemistry · doi:10.1021/ac50019a016 · Cited by 1,815
Metal oxide-based gas sensor research: How to?
BARSAN, N., KOZIEJ, D., & WEIMAR, U. (2007) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2006.09.047 · Cited by 1,696
Zhang, L., Wu, H. B., Madhavi, S., Hng, H. H., & Lou, X. W. (. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307475c · Cited by 984
Sensors for Breath Testing: From Nanomaterials to Comprehensive Disease Detection
Konvalina, G., & Haick, H. (2014) · Accounts of Chemical Research · doi:10.1021/ar400070m · Cited by 561
In Situ and Operando Spectroscopy for Assessing Mechanisms of Gas Sensing
Gurlo, A., & Riedel, R. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200602597 · Cited by 411
Solid-state gas sensors for breath analysis: A review
Di Natale, C., Paolesse, R., Martinelli, E., & Capuano, R. (2014) · Analytica Chimica Acta · doi:10.1016/j.aca.2014.03.014 · Cited by 365
Lin, T.-C., Seshadri, G., & Kelber, J. A. (1997) · Applied Surface Science · doi:10.1016/s0169-4332(97)00167-0 · Cited by 355
Ma, J., Ren, Y., Zhou, X., Liu, L., Zhu, Y., Cheng, X., Xu, P., Li, X., Deng, Y., & Zhao, D. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705268 · Cited by 351
Liu, X., Chen, N., Han, B., Xiao, X., Chen, G., Djerdj, I., & Wang, Y. (2015) · Nanoscale · doi:10.1039/c5nr03585f · Cited by 349
Cited by
Gas sensing mechanisms of metal oxide semiconductors: a focus review
Ji, H., Zeng, W., & Li, Y. (2019) · Nanoscale · doi:10.1039/c9nr07699a · Cited by 1,108
Advances in Noble Metal-Decorated Metal Oxide Nanomaterials for Chemiresistive Gas Sensors: Overview
Zhu, L.-Y., Ou, L.-X., Mao, L.-W., Wu, X.-Y., Liu, Y.-P., & Lu, H.-L. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01047-z · Cited by 553
Z-Scheme 2D/2D α-Fe2O3/g-C3N4 heterojunction for photocatalytic oxidation of nitric oxide
Geng, Y., Chen, D., Li, N., Xu, Q., Li, H., He, J., & Lu, J. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119409 · Cited by 372
W18O49/Ti3C2Tx Mxene nanocomposites for highly sensitive acetone gas sensor with low detection limit
Sun, S., Wang, M., Chang, X., Jiang, Y., Zhang, D., Wang, D., Zhang, Y., & Lei, Y. (2020) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.127274 · Cited by 338
Nanostructured Metal Oxide-Based Acetone Gas Sensors: A Review
Amiri, V., Roshan, H., Mirzaei, A., Neri, G., & Ayesh, A. I. (2020) · Sensors · doi:10.3390/s20113096 · Cited by 287
Metadata
- Authors
- Zhang, S., Yang, M., Liang, K., Turak, A., Zhang, B., Meng, D., Wang, C., Qu, F., Cheng, W., & Yang, M.
- Venue
- Sensors and Actuators B: Chemical
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 290
- Pages
- 59-67
- ISSN
- 0925-4005 (ISSN-L)
- OpenAlex
- W2926694748
- Cited by
- 265
- References
- 21
- FWCI
- 11.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An acetone gas sensor based on nanosized Pt-loaded Fe2O3 nanocubes. https://app.cochat.ai/papers/10.1016/j.snb.2019.03.082
- The paper
- Zhang, S., Yang, M., Liang, K., Turak, A., Zhang, B., Meng, D., Wang, C., Qu, F., Cheng, W., & Yang, M. (2019). An acetone gas sensor based on nanosized Pt-loaded Fe2O3 nanocubes. Sensors and Actuators B: Chemical. https://doi.org/10.1016/j.snb.2019.03.082
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.