The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Role of Oxygen Vacancies in Nanostructured Metal-Oxide Gas Sensors: A Review
Open accessAbstract
Abstract Investigations into the mechanisms governing the behavior of metal oxide gas sensors continue to be of great interest. Oxygen vacancies are a ubiquitous defect in this class of materials and their characteristics can be affected by synthesis, processing and operating parameters. The primary role of oxygen vacancies in modifying sensing performance cited in the gas sensing literature is based on a modulation of the amount of surface adsorbed oxygen or alternatively, the baseline resistance. Unfortunately, this generalized description does not provide a complete representation of the role of oxygen vacancies that would aid in more a fundamental understanding of their role in gas sensing. To this end, an attempt is made to distinguish between the role of surface and bulk oxygen vacancies where emphasis on proper characterization is first highlighted. The influence of surface oxygen vacancies on factors affecting adsorption, such as surface structure, are examined to gain understanding on improved sensing performance. The effect of bulk oxygen vacancy concentration and distribution on sensing are also discussed. Finally, the importance of these concepts within the context of doped and heterostructured gas sensors are then briefly discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The surface science of titanium dioxide
Diebold, U. (2003) · Surface Science Reports · doi:10.1016/s0167-5729(02)00100-0 · Cited by 7,944
Conduction Model of Metal Oxide Gas Sensors
Barsan, N., & Weimar, U. (2001) · Journal of Electroceramics · doi:10.1023/a:1014405811371 · Cited by 2,721
The surface and materials science of tin oxide
Batzill, M., & Diebold, U. (2005) · Progress in Surface Science · doi:10.1016/j.progsurf.2005.09.002 · Cited by 2,557
Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications
Pan, X., Yang, M.-Q., Fu, X., Zhang, N., & Xu, Y.-J. (2013) · Nanoscale · doi:10.1039/c3nr00476g · Cited by 2,151
Nanoscale metal oxide-based heterojunctions for gas sensing: A review
Miller, D. R., Akbar, S. A., & Morris, P. A. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2014.07.074 · Cited by 1,852
Self-citationMetal oxides for solid-state gas sensors: What determines our choice?
Korotcenkov, G. (2007) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2007.01.044 · Cited by 1,670
Grain size effects on gas sensitivity of porous SnO2-based elements
Xu, C., Tamaki, J., Miura, N., & Yamazoe, N. (1991) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(91)80207-z · Cited by 1,426
SnO2: A comprehensive review on structures and gas sensors
Das, S., & Jayaraman, V. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.06.003 · Cited by 1,226
Surface modification and enhanced photocatalytic CO2 reduction performance of TiO2: a review
Low, J., Cheng, B., & Yu, J. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.09.093 · Cited by 1,181
Oxide Materials for Development of Integrated Gas Sensors—A Comprehensive Review
Eranna, G., Joshi, B. C., Runthala, D. P., & Gupta, R. P. (2004) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408430490888977 · Cited by 1,072
CHEMICAL SENSING AND CATALYSIS BY ONE-DIMENSIONAL METAL-OXIDE NANOSTRUCTURES
Kolmakov, A., & Moskovits, M. (2004) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.34.040203.112141 · Cited by 1,024
Chemical Sensing and Catalysis by One‐Dimensional Metal‐Oxide Nanostructures
Kolmakov, A., & Moskovits, M. (2004) · ChemInform · doi:10.1002/chin.200441227 · Cited by 914
High-Sensitivity Humidity Sensor Based on a Single SnO2 Nanowire
Kuang, Q., Lao, C., Wang, Z. L., Xie, Z., & Zheng, L. (2007) · Journal of the American Chemical Society · doi:10.1021/ja070788m · Cited by 892
Synergistic effects in gas sensing semiconducting oxide nano-heterostructures: A review
Walker, J. M., Akbar, S. A., & Morris, P. A. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.01.049 · Cited by 602
Self-citationNowotny, M. K., Sheppard, L. R., Bak, T., & Nowotny, J. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp077275m · Cited by 591
Synthesis, properties and applications of ZnO nanomaterials with oxygen vacancies: A review
Wang, J., Chen, R., Xiang, L., & Komarneni, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.02.013 · Cited by 511
New perspectives of gas sensor technology
Yamazoe, N., & Shimanoe, K. (2009) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2009.01.023 · Cited by 436
In Situ and Operando Spectroscopy for Assessing Mechanisms of Gas Sensing
Gurlo, A., & Riedel, R. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200602597 · Cited by 411
Shon, A., Chu, J.-U., Jung, J., Kim, H., & Youn, I. (2017) · Sensors · doi:10.3390/s18010001 · Cited by 320
Zhou, X., Liu, N., & Schmuki, P. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b03709 · Cited by 287
Ramaraj, S. G., NAVANEETHAN, M., Patil, V. L., Ponnusamy, S., Muthamizhchelvan, C., Kawasaki, S., Patil, P. S., & Hayakawa, Y. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.08.015 · Cited by 282
Wu, Q., & van de Krol, R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302246b · Cited by 272
Superior acetone gas sensor based on electrospun SnO2 nanofibers by Rh doping
Kou, X., Xie, N., Chen, F., Wang, T., Guo, L., Wang, C., Wang, Q., Ma, J., Sun, Y., Zhang, H., et al. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2017.10.011 · Cited by 265
Xu, J., Xue, Z., Qin, N., Cheng, Z., & Xiang, Q. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.09.193 · Cited by 244
One step synthesis of branched SnO2/ZnO heterostructures and their enhanced gas-sensing properties
Yang, X., Zhang, S., yu, Q., Zhao, L., Sun, P., Wang, T., Liu, F., Yan, X., Gao, Y., Liang, X., et al. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2018.10.138 · Cited by 236
Spencer, M. J. S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.06.001 · Cited by 233
Sankar ganesh, R., Navaneethan, M., Mani, G. K., Ponnusamy, S., Tsuchiya, K., Muthamizhchelvan, C., Kawasaki, S., & Hayakawa, Y. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.187 · Cited by 216
Generation of oxygen vacancies in ZnO nanorods/films and their effects on gas sensing properties
Kim, W., Choi, M., & Yong, K. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2014.12.072 · Cited by 213
Hu, J., Sun, Y., Xue, Y., Zhang, M., Li, P., Lian, K., Zhuiykov, S., Zhang, W., & Chen, Y. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2017.10.139 · Cited by 213
Conduction mechanisms in one dimensional core-shell nanostructures for gas sensing: A review
Karnati, P., Akbar, S. A., & Morris, P. A. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.05.049 · Cited by 206
Self-citationBârsan, N., Hübner, M., & Weimar, U. (2011) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2011.05.011 · Cited by 202
Singh, G., Virpal, & Singh, R. C. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.11.086 · Cited by 202
Spatially resolved Hall effect measurement in a single semiconductor nanowire
Storm, K., Halvardsson, F., Heurlin, M., Lindgren, D., Gustafsson, A., Wu, P. M., Monemar, B., & Samuelson, L. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.190 · Cited by 185
Synthesis of SnO2–ZnO heterostructured nanofibers for enhanced ethanol gas-sensing performance
Yan, S. H., Ma, S. Y., Li, W. Q., Xu, X. L., Cheng, L., Song, H. S., & Liang, X. Y. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.06.104 · Cited by 175
Tang, W. P., Wang, J., Yao, P., & Li, X. (2013) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.11.003 · Cited by 159
SnO2 (n)-NiO (p) composite nanowebs: Gas sensing properties and sensing mechanisms
Kim, J., Lee, J., Mirzaei, A., Kim, H. W., & Kim, S. S. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.11.063 · Cited by 152
Synthesis of Co-doped SnO2 nanofibers and their enhanced gas-sensing properties
Kou, X., Wang, C., Ding, M., Feng, C., Li, X., Ma, J., Zhang, H., Sun, Y., & Lu, G. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.06.006 · Cited by 146
Xu, S. H., Gao, J., Wang, L., Kan, K., Xie, Y., Shen, P. K., Li, L., & Shi, K. (2015) · Nanoscale · doi:10.1039/c5nr03796d · Cited by 144
One-step synthesis and gas sensing properties of hierarchical Cd-doped SnO2 nanostructures
Sun, P., Zhou, X., Wang, C., Wang, B., Xu, X., & Lu, G. (2013) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.08.045 · Cited by 136
Site Requirements for the Adsorption and Reaction of Oxygenates on Metal Oxide Surfaces
Vohs, J. M. (2012) · Chemical Reviews · doi:10.1021/cr300328u · Cited by 130
Highly sensitive acetone sensor based on Eu-doped SnO2 electrospun nanofibers
Jiang, Z., Zhao, R., Sun, B., Nie, G., Ji, H., Lei, J., & Wang, C. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.07.060 · Cited by 130
Enhanced formaldehyde detection based on Ni doping of SnO 2 nanoparticles by one-step synthesis
Hu, J., Wang, T., Wang, Y., Huang, D., He, G., Han, Y., Hu, N., Su, Y., Zhou, Z., Zhang, Y., et al. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.02.035 · Cited by 127
Wang, Z., Zhang, T., Han, T., Fei, T., Liu, S., & Lu, G. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.03.169 · Cited by 126
Xu, R., Zhang, L., Li, M., Yin, Y., Yin, J., Zhu, M., Chen, J., Wang, Y., & Bie, L. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.03.012 · Cited by 123
Abokifa, A. A., Haddad, K., Fortner, J. D., Lo, C. S., & Biswas, P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09535j · Cited by 121
Gas sensing performance of Al doped ZnO thin film for H2S detection
Kolhe, P. S., Shinde, A. B., Kulkarni, S. G., Maiti, N., Koinkar, P., & Sonawane, K. M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.03.123 · Cited by 120
SnO2 nanocrystals with abundant oxygen vacancies: Preparation and room temperature NO2 sensing
Wei, Y., Chen, C., Yuan, G., & Gao, S. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.04.220 · Cited by 115
Sensitive and selective acetone sensor based on Gd doped WO3/reduced graphene oxide nanocomposite
Kaur, J., Anand, K., Kaur, A., & Singh, R. C. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.11.159 · Cited by 114
Sensing of acetone by Al-doped ZnO
Yoo, R., Güntner, A. T., Park, Y., Rim, H. J., Lee, H., & Lee, W. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.12.001 · Cited by 111
Li, Z., & Yi, J. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.11.136 · Cited by 104
Room temperature CO sensor fabricated from Pt-loaded SnO2 porous nanosolid
Wang, K., Zhao, T., Lian, G., Yu, Q., Luan, C., Wang, Q., & Cui, D. (2013) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.04.054 · Cited by 102
Optical identification of oxygen vacancy types in SnO2 nanocrystals
Liu, L. Z., Xu, J. Q., Wu, X., Li, T. H., Shen, J. C., & Chu, P. K.-H. (2013) · Applied Physics Letters · doi:10.1063/1.4789538 · Cited by 102
Two-dimensional NiO nanosheets with enhanced room temperature NO 2 sensing performance via Al doping
Wang, S., Huang, D., Xu, S., Jiang, W., Wang, T., Hu, J., Hu, N., Su, Y., Zhang, Y., & Yang, Z. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp03259e · Cited by 101
X-ray spectroscopy of energy materials under in situ/operando conditions
Crumlin, E. J., Liu, Z., Bluhm, H., Yang, W., Guo, J., & Hussain, Z. (2015) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/j.elspec.2015.06.008 · Cited by 100
Wang, T., Kou, X., Zhao, L., Sun, P., Liu, C., Wang, Y., Shimanoe, K., Yamazoe, N., & Lu, G. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.04.099 · Cited by 99
Zou, C., Liang, F., & Xue, S. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.07.072 · Cited by 91
Modaberi, M. R., Rooydell, R., Brahma, S., Akande, A. A., Mwakikunga, B. W., & Liu, C. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.06.117 · Cited by 79
Zhang, C., Geng, X., Liao, H., Li, C., & Debliquy, M. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.11.024 · Cited by 75
Ge, Y., Wei, Z., Li, Y., Qu, J., Zu, B., & Dou, X. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.01.092 · Cited by 68
Zhu, L., Li, Y., & Zeng, W. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.08.003 · Cited by 67
Acetone Sensing Properties and Mechanism of SnO2 Thick-Films
Chen, Y., Qin, H., Cao, Y., et al. (2018) · Sensors · doi:10.3390/s18103425 · Cited by 65
Xu, S., Zhao, H., Xu, Y., Xu, R. C., & Lei, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03953 · Cited by 59
Liu, J., Chen, G., Yu, Y., Wu, Y., Zhou, M., Zhang, H., Lv, C., Zheng, Y., & He, F. (2015) · RSC Advances · doi:10.1039/c5ra05212b · Cited by 50
Liu, J., Gao, Y., Wu, X. D., Jin, G., Zhai, Z., & Liu, H. (2017) · Sensors · doi:10.3390/s17081852 · Cited by 45
Korotcenkov, G. S., & Cho, B. K. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.01.108 · Cited by 43
Basics of semiconducting metal oxide–based gas sensors
Oprea, A., Degler, D., Bârsan, N., Hémeryck, A., & Rebholz, J. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811224-3.00003-2 · Cited by 41
Facile synthesis of Ca 2+ /Au co-doped SnO 2 nanofibers and their application in acetone sensor
Jiang, Z., Yin, M., & Wang, C. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.02.031 · Cited by 34
Liu, Q., Han, Y. H., Cai, J., Crumlin, E. J., Li, Y., & Liu, Z. (2018) · Catalysis Letters · doi:10.1007/s10562-018-2362-z · Cited by 34
Active sites on the surface of nanocrystalline semiconductor oxides ZnO and SnO2 and gas sensitivity
Marikutsa, A., Vorobyeva, N. A., Rumyantseva, M. N., & ́kov, A. M. G. (2017) · Russian Chemical Bulletin · doi:10.1007/s11172-017-1949-7 · Cited by 31
Cited by
Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
Nanostructured metal oxide semiconductor-based gas sensors: A comprehensive review
Krishna, K. G., Parne, S., Pothukanuri, N., Kathirvelu, V., Gandi, S., & Joshi, D. (2022) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2022.113578 · Cited by 380
Xu, Y., Zheng, L., Yang, C., Zheng, W., Liu, X., & Zhang, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04398 · Cited by 377
Defect Engineering in Nanocatalysts: From Design and Synthesis to Applications
Muhammad, P., Zada, A., Rashid, J., Hanif, S., Gao, Y., Li, C., Li, Y., Fan, K., & Wang, Y. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314686 · Cited by 350
Yaqoob, U., & Younis, M. I. (2021) · Sensors · doi:10.3390/s21082877 · Cited by 256
Metadata
- Authors
- Al-Hashem, M., Akbar, S., & Morris, P.
- Venue
- Sensors and Actuators B: Chemical
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 301
- Pages
- 126845
- ISSN
- 0925-4005 (ISSN-L)
- OpenAlex
- W2968499686
- Cited by
- 839
- References
- 69
- FWCI
- 23.53
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.