The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Oxygen vacancy defects engineering on Ce-doped α-Fe2O3 gas sensor for reducing gases
Abstract
Abstract Surface oxygen vacancy defects (OV) are regarded to be beneficial to the gas sensing behavior by significantly improving the carrier density and providing more oxygen adsorption sites. In this work, Ce-doped α-Fe2O3 composites with abundant OV defects were synthesized using an oil bath method assisted with annealing treatment. Morphological characterization results indicate that the lamellar architecture of α-Fe2O3 is transformed to nanospheres composed of massive nanoparticles with small sizes (7–9 nm) after introducing Ce elements. Gas sensing results show that the FeCe10 (Fe/Ce = 10:1) sensors exhibit enhanced acetone sensing response of 26.3–100 ppm gas at the operating temperature of 220 °C toward that of pure α-Fe2O3. Most importantly, X-ray photoelectron spectroscopy and electron spin resonance spectroscopy results confirm that the sensing responses of Ce-doped α-Fe2O3 sensors are directly related to the OV defects, that is, the larger the quantity of the OV defects, the higher the sensing response. The unpaired electrons trapped in OV defects can provide more active sites for adsorption of oxygen and acetone molecules, resulting in a thicker depletion layer and a higher potential barrier. Our work highlights the decisive role of OV defects in gas sensors, which can also provide a rational approach to boost the sensing performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Transition Metal Oxide Work Functions: The Influence of Cation Oxidation State and Oxygen Vacancies
Greiner, M. T., Chai, L., Helander, M. G., Tang, W., & Lu, Z. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200615 · Cited by 924
MOF‐Derived Porous ZnO/ZnFe2O4/C Octahedra with Hollow Interiors for High‐Rate Lithium‐Ion Batteries
Zou, F., Hu, X., Li, Z., Qie, L., Hu, C., Zeng, R., Jiang, Y., & Huang, Y. (2014) · Advanced Materials · doi:10.1002/adma.201402322 · Cited by 750
Porous Metal Oxides as Gas Sensors
Tiemann, M. (2007) · Chemistry – A European Journal · doi:10.1002/chem.200700927 · Cited by 675
Mesoporous materials as gas sensors
Wagner, T., Haffer, S., Weinberger, C., Klaus, D., & Tiemann, M. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35379b · Cited by 629
An overview: Facet-dependent metal oxide semiconductor gas sensors
Gao, X., & Zhang, T. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2018.08.129 · Cited by 410
Turner, C., Španěl, P., & Smith, D. (2006) · Physiological Measurement · doi:10.1088/0967-3334/27/4/001 · Cited by 379
Ma, J., Ren, Y., Zhou, X., Liu, L., Zhu, Y., Cheng, X., Xu, P., Li, X., Deng, Y., & Zhao, D. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705268 · Cited by 351
Liu, J., Dai, M., Wang, T., Sun, P., Liang, X., Lu, G., Shimanoe, K., & Yamazoe, N. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00169 · Cited by 339
Self-citationMesoporous thin films: properties and applications
Innocenzi, P., & Malfatti, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35377j · Cited by 298
Breath Ethanol and Acetone as Indicators of Serum Glucose Levels: An Initial Report
Galassetti, P. R., Novak, B., Nemet, D., Rose-Gottron, C., Cooper, D. M., Meinardi, S., Newcomb, R., Zaldivar, F., & Blake, D. R. (2005) · Diabetes Technology & Therapeutics · doi:10.1089/dia.2005.7.115 · Cited by 229
Ouyang, J., Pei, J., Kuang, Q., Xie, Z., & Zheng, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502358g · Cited by 221
Defect‐Based Single‐Atom Electrocatalysts
Zhang, Y., Guo, L., Tao, L., Lu, Y., & Wang, S. (2019) · Small Methods · doi:10.1002/smtd.201800406 · Cited by 221
Hu, J., Sun, Y., Xue, Y., Zhang, M., Li, P., Lian, K., Zhuiykov, S., Zhang, W., & Chen, Y. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2017.10.139 · Cited by 213
Zhang, N., Gao, C., & Xiong, Y. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2018.09.010 · Cited by 206
Enhanced NH3 gas-sensing performance of silica modified CeO2 nanostructure based sensors
Wang, J., Li, Z., Zhang, S., Yan, S., Cao, B., Wang, Z., & Fu, Y. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2017.08.149 · Cited by 205
Self-citationQin, Z., Xu, K., Yue, H., Wang, H., Zhang, J., Ouyang, C., Xie, C., & Zeng, D. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2018.02.060 · Cited by 199
Synthesis of Nanoscale Ce1-xFexO2 Solid Solutions via a Low-Temperature Approach
Li, G., Smith, R. L., & Inomata, H. (2001) · Journal of the American Chemical Society · doi:10.1021/ja016502+ · Cited by 166
Zhang, L., Fang, Q., Huang, Y., Xu, K., Chu, P. K.-H., & Ma, F. (2018) · Analytical Chemistry · doi:10.1021/acs.analchem.8b01768 · Cited by 146
Lupan, O. I., Postica, V., Wolff, N., Polonskyi, O., Düppel, V., Kaidas, V., Lazari, E., Ababii, N., Faupel, F., Kienle, L., et al. (2017) · Small · doi:10.1002/smll.201602868 · Cited by 139
Thư, N. T. A., Cuong, N. D., Nguyen, L. C., Khieu, D. Q., Nam, P. C., Toàn, N. V., Hung, C. M., & Hiếu, N. V. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.09.154 · Cited by 138
Yang, Y., Ma, H., Zhuang, J., & Wang, X. (2011) · Inorganic Chemistry · doi:10.1021/ic201104w · Cited by 135
Self-citationWang, Z., Zhang, T., Han, T., Fei, T., Liu, S., & Lu, G. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.03.169 · Cited by 126
Methanol gas-sensing properties of CeO2–Fe2O3 thin films
Neri, G., Bonavita, A., Rizzo, G., Galvagno, S., Capone, S., & Siciliano, P. A. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2005.06.062 · Cited by 111
Zhou, X., Zhu, Y., Luo, W. D., Ren, Y., Xu, P., Elzatahry, A. A. F., Cheng, X., Alghamdi, A. A. B., Deng, Y., & Zhao, D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05687c · Cited by 108
Qu, J., Ge, Y., Zu, B., Li, Y., & Dou, X. (2016) · Small · doi:10.1002/smll.201503131 · Cited by 100
Self-citationVertically Ordered Hematite Nanotube Array as an Ultrasensitive and Rapid Response Acetone Sensor
Kim, D. H., Shim, Y., Jeon, J., Jeong, H. Y., Park, S. S., Kim, Y.-W., Kim, J.-S., Lee, J., & Jang, H. W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504156w · Cited by 98
Soot template TiO2 fractals as a photoactive gas sensor for acetone detection
Sabri, Y. M., Kandjani, A. E., Rashid, S. S. A. A. H., Harrison, C. J., Ippolito, S. J., & Bhargava, S. K. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.08.059 · Cited by 83
Sun, L., Han, X., Liu, K., Yin, S., Chen, Q., Kuang, Q., Han, X., Xie, Z., & Wang, C. (2015) · Nanoscale · doi:10.1039/c5nr01790d · Cited by 77
Chen, B., Zhu, Z., Liu, S., Hong, J., Ma, J., Qiu, Y., & Chen, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503343u · Cited by 74
High sensing properties of Ce-doped α-Fe2O3 nanotubes to acetone
Liu, C.-B., Shan, H., Liu, L. M., Li, S., & Li, H. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.08.011 · Cited by 43
Cited by
Gas sensing mechanisms of metal oxide semiconductors: a focus review
Ji, H., Zeng, W., & Li, Y. (2019) · Nanoscale · doi:10.1039/c9nr07699a · Cited by 1,108
Self-citationZhang, C., Liu, G., Geng, X., Wu, K., & Debliquy, M. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112026 · Cited by 297
Metadata
- Authors
- Wang, X., Wang, T., Si, G., Li, Y., Zhang, S., Deng, X., & Xu, X.
- Venue
- Sensors and Actuators B: Chemical
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 302
- Pages
- 127165
- ISSN
- 0925-4005 (ISSN-L)
- OpenAlex
- W2973343186
- Cited by
- 367
- References
- 30
- FWCI
- 11.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.