The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics
Open accessAbstract
Regulating the temperature of building integrated photovoltaics (BIPV) using phase change materials (PCMs) reduces the loss of temperature dependent photovoltaic (PV) efficiency. Five PCMs were selected for evaluation all with melting temperatures 25 ± 4 °C and heat of fusion between 140 and 213 kJ/kg. Experiments were conducted at three insolation intensities to evaluate the performance of each PCM in four different PV/PCM systems. The effect on thermal regulation of PV was determined by changing the (i) mass of PCM and (ii) thermal conductivities of the PCM and PV/PCM system. A maximum temperature reduction of 18 °C was achieved for 30 min while 10 °C temperature reduction was maintained for 5 h at −1000 W/m2 insolation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
The effect of temperature on the power drop in crystalline silicon solar cells
Radziemska, E. (2003) · Renewable Energy · doi:10.1016/s0960-1481(02)00015-0 · Cited by 653
Pasupathy, A., Velraj, R., & Seeniraj, R. V. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.010 · Cited by 555
Increased electrical yield via water flow over the front of photovoltaic panels
Krauter, S. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.01.011 · Cited by 545
Thermal regulation of building-integrated photovoltaics using phase change materials
Huang, M. J., Eames, P., & Norton, B. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2003.11.015 · Cited by 525
Self-citationAir-cooled PV/T solar collectors with low cost performance improvements
Tonui, J. K., & Tripanagnostopoulos, Y. (2007) · Solar Energy · doi:10.1016/j.solener.2006.08.002 · Cited by 430
Phase change materials for limiting temperature rise in building integrated photovoltaics
Huang, M. J., Eames, P., & Norton, B. (2005) · Solar Energy · doi:10.1016/j.solener.2005.10.006 · Cited by 423
Self-citationKhateeb, S. A., Amiruddin, S., Farid, M., Selman, J. R., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.033 · Cited by 410
Khateeb, S. A., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.070 · Cited by 405
Application of phase change materials in thermal management of electronics
Kandasamy, R., Wang, X.-Q., & Mujumdar, A. S. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.12.013 · Cited by 392
Cited by
An overview of thermal energy storage systems
Alva, G., Lin, Y., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2017.12.037 · Cited by 1,408
Fatty acids as phase change materials: A review
Yuan, Y., Zhang, N., Tao, W., Cao, X., & He, Y. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.107 · Cited by 755
Ling, Z., Zhang, Z., Shi, G., Fang, X., Wang, L., Gao, X., Fang, Y., Xu, T., Wang, S., & Liu, X. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.017 · Cited by 558
Ali, H. M. (2020) · Solar Energy · doi:10.1016/j.solener.2019.11.075 · Cited by 538
Increasing the efficiency of PV panel with the use of PCM
Stropnik, R., & Stritih, U. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.06.011 · Cited by 467
Photovoltaic/Thermal (PV/T) systems: Status and future prospects
Al-Waeli, A. H. A., Sopian, K., Kazem, H. A., & Chaichan, M. T. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.126 · Cited by 463
Al-Waeli, A. H. A., Sopian, K., Chaichan, M. T., Kazem, H. A., Ibrahim, A., Mat, S., & Ruslan, M. H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.032 · Cited by 433
Pandey, A. K., Hossain, M. S., Tyagi, V. V., Abd Rahim, N., Selvaraj, J. A. /., & Sari, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.043 · Cited by 423
Ma, T., Yang, H., Zhang, Y., Lu, L., & Wang, X. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.12.003 · Cited by 419
Shah, T. R., & Ali, H. M. (2019) · Solar Energy · doi:10.1016/j.solener.2019.03.012 · Cited by 366
Yearly energy performance of a photovoltaic-phase change material (PV-PCM) system in hot climate
Hasan, A., Sarwar, J., Alnoman, H., & Abdelbaqi, S. (2017) · Solar Energy · doi:10.1016/j.solener.2017.01.070 · Cited by 351
Self-citationShokouhmand, H., & Kamkari, B. (2013) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2013.06.010 · Cited by 343
Preet, S., Bhushan, B., & Mahajan, T. (2017) · Solar Energy · doi:10.1016/j.solener.2017.07.040 · Cited by 341
Ghosh, A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123343 · Cited by 332
A review of solar hybrid photovoltaic-thermal (PV-T) collectors and systems
Herrando, M., Wang, K., Huang, G., Otanicar, T., Mousa, O. B., Agathokleous, R. A., Ding, Y., Kalogirou, S., Ekins-Daukes, N., Taylor, R. A., et al. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101072 · Cited by 321
Sardarabadi, M., Passandideh-Fard, M., Maghrebi, M.-J., & Ghazikhani, M. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.11.032 · Cited by 316
Improving the efficiency of photovoltaic cells using PCM infused graphite and aluminium fins
Atkin, P., & Farid, M. M. (2015) · Solar Energy · doi:10.1016/j.solener.2015.01.037 · Cited by 309
Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM
Al-Waeli, A. H. A., Chaichan, M. T., Sopian, K., Kazem, H. A., Mahood, H. B., & Khadom, A. A. (2019) · Solar Energy · doi:10.1016/j.solener.2018.11.016 · Cited by 306
Phase change materials for photovoltaic thermal management
Browne, M. C., Norton, B., & McCormack, S. J. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.050 · Cited by 303
Self-citationChandel, S. S., & Agarwal, T. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.001 · Cited by 299
Nada, S. A., El-Nagar, D. H., & Hussein, H. M. S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.04.035 · Cited by 295
Thermal management systems for Photovoltaics (PV) installations: A critical review
Du, D., Darkwa, J., & Kokogiannakis, G. (2013) · Solar Energy · doi:10.1016/j.solener.2013.08.018 · Cited by 272
Ma, T., Li, Z., & Zhao, J. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109406 · Cited by 258
Barreneche, C., Martín, M., Calvo-de la Rosa, J., Majó, M., & Fernández, A. I. (2019) · Molecules · doi:10.3390/molecules24071232 · Cited by 31
Metadata
- Authors
- Hasan, A., McCormack, S. J., Huang, M. J., & Norton, B.
- Venue
- Solar Energy
- Publisher
- Elsevier BV
- Published
- 2010-09
- Volume
- 84
- Issue
- 9
- Pages
- 1601-1612
- ISSN
- 0038-092X (ISSN-L)
- OpenAlex
- W2094999770
- Cited by
- 476
- References
- 18
- FWCI
- 12.78
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.