The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM
Abstract
The photovoltaic/thermal (PVT) system is developed to combine the two separate systems to reduce the located area and cost, improve the efficiency and save lots of materials. However, different PVT designs and configurations had been proposed with air, water, nanofluid, phase change materials (PCM) and mix of these cooling methods. In this paper, a mathematical model was proposed for the new nanofluid/nano-PCM PVT system. Experiments had been conducted to validate the mathematical model results. The comparison confirmed the ability of the proposed mathematical model to satisfactory simulate and match the experimental results. The experimental and mathematical model results show that electrical and thermal efficiencies are 13.7%, 13.2% and 72%, 71.3% respectively. However, it is found that the maximum temperature registered in glass, PV cell, wax, and nanofluid are 41.2, 39.92, 38.8 and 36.5, respectively. The proposed mathematical model accuracy compared and validated with experiment results and shows a good consistent and agreement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar engineering of thermal processes
(1982) · Solar Energy · doi:10.1016/0038-092x(82)90232-8 · Cited by 9,534
Solar Engineering of Thermal Processes
Duffie, J. A., & Beckman, W. A. (2013) · Wiley eBooks · doi:10.1002/9781118671603 · Cited by 6,387
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Experimental methods for engineers
Anderson, A. M. (1994) · Experimental Thermal and Fluid Science · doi:10.1016/0894-1777(94)90118-x · Cited by 3,403
Experimental methods for engineers
Holman, J. P. (1971) · Cited by 2,681
Yousefi, T., Veysi, F., Shojaeizadeh, E., & Zinadini, S. (2012) · Renewable Energy · doi:10.1016/j.renene.2011.08.056 · Cited by 729
Hybrid photovoltaic/thermal solar systems
Tripanagnostopoulos, Y., Nousia, T., Souliotis, M., & Yianoulis, P. (2002) · Solar Energy · doi:10.1016/s0038-092x(01)00096-2 · Cited by 602
Hasan, A., McCormack, S. J., Huang, M. J., & Norton, B. (2010) · Solar Energy · doi:10.1016/j.solener.2010.06.010 · Cited by 476
Increasing the efficiency of PV panel with the use of PCM
Stropnik, R., & Stritih, U. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.06.011 · Cited by 467
Cited by
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
Pordanjani, A. H., Aghakhani, S., Afrand, M., Sharifpur, M., Meyer, J. P., Xu, H., Ali, H. M., Karimi, N., & Cheraghian, G. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128573 · Cited by 260
Ma, T., Li, Z., & Zhao, J. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109406 · Cited by 258
Metadata
- Authors
- Al-Waeli, A. H. A., Chaichan, M. T., Sopian, K., Kazem, H. A., Mahood, H. B., & Khadom, A. A.
- Venue
- Solar Energy
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 177
- Pages
- 178-191
- ISSN
- 0038-092X (ISSN-L)
- OpenAlex
- W2901625737
- Cited by
- 306
- References
- 44
- FWCI
- 6.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM. https://app.cochat.ai/papers/10.1016/j.solener.2018.11.016
- The paper
- Al-Waeli, A. H. A., Chaichan, M. T., Sopian, K., Kazem, H. A., Mahood, H. B., & Khadom, A. A. (2019). Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM. Solar Energy. https://doi.org/10.1016/j.solener.2018.11.016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.