The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Stability of perovskite solar cells
Open accessAbstract
Abstract The performance of perovskite solar cells has increased at an unprecedented rate, with efficiencies currently exceeding 20%. This technology is particularly promising, as it is compatible with cheap solution processing. For a thin-film solar product to be commercially viable, it must pass the IEC 61646 testing standards, regarding the environmental stability. Currently, the poor stability of perovskite solar cells is a barrier to commercialisation. The main issue causing this problem is the instability of the perovskite layer when in contact with moisture; however, it is important to explore stability problems with the other layers and interfaces within the device. The stability issues discussed in this review highlight the need to view the device as a whole system, due to the interdependent relationships between the layers, including: the perovskite absorber, electron transport layers, hole transport layers, other buffer layers and the electrodes. We also discuss other issues pertaining to device stability, such as measurement-induced hysteresis and the requirement for standard testing protocols. For perovskite solar cells to achieve the required stability, future research must focus on improving the intrinsic stability of the perovskite absorber layer, carefully designing the device geometry, and finding durable encapsulant materials, which seal the device from moisture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B. F. E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Chemistry · doi:10.1038/nchem.1861 · Cited by 4,473
Cited by
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Role of Phenolic Compounds in Human Disease: Current Knowledge and Future Prospects
Rahman, M. M., Rahaman, M. S., Islam, M. R., Rahman, F., Mithi, F. M., Alqahtani, T., Almikhlafi, M. A., Alghamdi, S. Q., Alruwaili, A. S., Hossain, M. S., et al. (2021) · Molecules · doi:10.3390/molecules27010233 · Cited by 852
New-generation integrated devices based on dye-sensitized and perovskite solar cells
Yun, S., Qin, Y., Uhl, A. R., Vlachopoulos, N., Yin, M., Li, D., Han, X., & Hagfeldt, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03165c · Cited by 478
Stability challenges for the commercialization of perovskite–silicon tandem solar cells
Duan, L., Walter, D., Chang, N., Bullock, J., Kang, D., Phang, S. P., Weber, K., White, T., Macdonald, D., Catchpole, K., et al. (2023) · Nature Reviews Materials · doi:10.1038/s41578-022-00521-1 · Cited by 444
Stability of perovskite solar cells: issues and prospects
Chowdhury, T. A., Bin Zafar, M. A., Sajjad-Ul Islam, M., Shahinuzzaman, M., Islam, M. A., & Khandaker, M. U. (2023) · RSC Advances · doi:10.1039/d2ra05903g · Cited by 444
Metadata
- Authors
- Wang, D., Wright, M., Elumalai, N. K., & Uddin, A.
- Venue
- Solar Energy Materials and Solar Cells
- Publisher
- Elsevier BV
- Published
- 2016-04
- Volume
- 147
- Pages
- 255-275
- ISSN
- 0927-0248 (ISSN-L)
- OpenAlex
- W2230864058
- Cited by
- 998
- References
- 3
- FWCI
- 51.99
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Stability of perovskite solar cells. https://app.cochat.ai/papers/10.1016/j.solmat.2015.12.025
- The paper
- Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016). Stability of perovskite solar cells. Solar Energy Materials and Solar Cells. https://doi.org/10.1016/j.solmat.2015.12.025
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
