The DOI matches its Crossref record; 105 of the 105 references it cites were found in a registry or an index.
Stability of perovskite solar cells
Open accessAbstract
The performance of perovskite solar cells has increased at an unprecedented rate, with efficiencies currently exceeding 20%. This technology is particularly promising, as it is compatible with cheap solution processing. For a thin-film solar product to be commercially viable, it must pass the IEC 61646 testing standards, regarding the environmental stability. Currently, the poor stability of perovskite solar cells is a barrier to commercialisation. The main issue causing this problem is the instability of the perovskite layer when in contact with moisture; however, it is important to explore stability problems with the other layers and interfaces within the device. The stability issues discussed in this review highlight the need to view the device as a whole system, due to the interdependent relationships between the layers, including: the perovskite absorber, electron transport layers, hole transport layers, other buffer layers and the electrodes. We also discuss other issues pertaining to device stability, such as measurement-induced hysteresis and the requirement for standard testing protocols. For perovskite solar cells to achieve the required stability, future research must focus on improving the intrinsic stability of the perovskite absorber layer, carefully designing the device geometry, and finding durable encapsulant materials, which seal the device from moisture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B. F. E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Chemistry · doi:10.1038/nchem.1861 · Cited by 4,473
Grätzel, M. (2003) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/s1389-5567(03)00026-1 · Cited by 4,405
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Ionic transport in hybrid lead iodide perovskite solar cells
Eames, C., Frost, J. M., Barnes, P. R. F., O’Regan, B. C., Walsh, A., & Islam, M. S. (2015) · Nature Communications · doi:10.1038/ncomms8497 · Cited by 2,889
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
A polymer tandem solar cell with 10.6% power conversion efficiency
You, J., Dou, L., Yoshimura, K., Kato, T., Ohya, K., Moriarty, T., Emery, K., Chen, C.-C., Gao, J., Li, G., et al. (2013) · Nature Communications · doi:10.1038/ncomms2411 · Cited by 2,778
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Recent Advances in Sensitized Mesoscopic Solar Cells
Grätzel, M. (2009) · Accounts of Chemical Research · doi:10.1021/ar900141y · Cited by 2,671
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Mor, G. K., Varghese, O. K., Paulose, M., Shankar, K., & Grimes, C. A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.04.007 · Cited by 1,958
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Single-junction polymer solar cells with high efficiency and photovoltage
He, Z., Xiao, B., Liu, F., Wu, H., Yang, Y., Xiao, S., Wang, C., Russell, T. P., & Cao, Y. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.6 · Cited by 1,675
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation
Azpiroz, J. M., Mosconi, E., Bisquert, J., & De Angelis, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01265a · Cited by 1,644
Tress, W., Marinova, N., Moehl, T., Zakeeruddin, S. M., Nazeeruddin, M. K., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03664f · Cited by 1,381
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Mixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting
Pellet, N., Gao, P., Gregori, G., Yang, T., Nazeeruddin, M. K., Maier, J., & Grätzel, M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309361 · Cited by 1,306
Highly efficient planar perovskite solar cells through band alignment engineering
Correa Baena, J. P., Steier, L., Tress, W., Saliba, M., Neutzner, S., Matsui, T., Giordano, F., Jacobsson, T. J., Srimath Kandada, A. R., Zakeeruddin, S. M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02608c · Cited by 1,265
Unger, E. L., Hoke, E. T., Bailie, C. D., Nguyen, W. H., Bowring, A. R., Heumüller, T., Christoforo, M. G., & McGehee, M. D. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02465f · Cited by 1,265
A Comprehensive Treatise on Inorganic and Theoretical Chemistry
(1931) · Journal of AOAC INTERNATIONAL · doi:10.1093/jaoac/14.1.118 · Cited by 1,259
Krebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
Kim, H.-S., & Park, N.-G. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501392m · Cited by 1,065
Single‐Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency
Chen, J., Cui, C., Li, Y., Zhou, L., Ou, Q., Li, C., Li, Y., & Tang, J. (2015) · Advanced Materials · doi:10.1002/adma.201404535 · Cited by 1,063
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Consensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
High‐Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3
Lee, J., Seol, D., Cho, A., & Park, N. (2014) · Advanced Materials · doi:10.1002/adma.201401137 · Cited by 951
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Kato, Y., Ono, L. K., Lee, M. V., Wang, S., Raga, S. R., & Qi, Y. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500195 · Cited by 844
Mechanism of carrier accumulation in perovskite thin-absorber solar cells
Kim, H.-S., Mora-Sero, I., Gonzalez-Pedro, V., Fabregat-Santiago, F., Juarez-Perez, E. J., Park, N.-G., & Bisquert, J. (2013) · Nature Communications · doi:10.1038/ncomms3242 · Cited by 844
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor
Saparov, B., Hong, F., Sun, J.-P., Duan, H.-S., Meng, W., Cameron, S., Hill, I. G., Yan, Y., & Mitzi, D. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01989 · Cited by 812
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
Krebs, F. C., Espinosa, N., Hösel, M., Søndergaard, R. R., & Jørgensen, M. (2014) · Advanced Materials · doi:10.1002/adma.201302031 · Cited by 793
Koh, T. M., Fu, K., Fang, Y., Chen, S., Sum, T. C., Mathews, N., Mhaisalkar, S. G., Boix, P. P., & Baikie, T. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp411112k · Cited by 790
Voltage output of efficient perovskite solar cells with high open-circuit voltage and fill factor
Ryu, S., Noh, J. H., Jeon, N. J., Chan Kim, Y., Yang, W. S., Seo, J., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00762j · Cited by 780
Impedance Spectroscopic Analysis of Lead Iodide Perovskite-Sensitized Solid-State Solar Cells
Dualeh, A., Moehl, T., Tétreault, N., Teuscher, J., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · ACS Nano · doi:10.1021/nn404323g · Cited by 728
A dopant-free hole-transporting material for efficient and stable perovskite solar cells
Liu, J., Wu, Y., Qin, C., Yang, X., Yasuda, T., Islam, A., Zhang, K., Peng, W., Chen, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01589d · Cited by 719
Modeling Anomalous Hysteresis in Perovskite Solar Cells
van Reenen, S., Kemerink, M., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01645 · Cited by 687
(2016) · Encyclopedia of Nanotechnology · doi:10.1007/978-94-017-9780-1_100265 · Cited by 670
Organic—inorganic hybrid solar cells: A comparative review
Wright, M., & Uddin, A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.006 · Cited by 654
Self-citationMonolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature
Albrecht, S., Saliba, M., Correa Baena, J. P., Lang, F., Kegelmann, L., Mews, M., Steier, L., Abate, A., Rappich, J., Korte, L., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02965a · Cited by 649
Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO
Yang, J., Siempelkamp, B. D., Mosconi, E., De Angelis, F., & Kelly, T. L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01598 · Cited by 629
Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts
Gong, J., Darling, S. B., & You, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00615e · Cited by 619
Ito, S., Tanaka, S., Manabe, K., & Nishino, H. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500449z · Cited by 585
Solar cell efficiency tables (version 46)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2637 · Cited by 528
Solar cells with one-day energy payback for the factories of the future
Espinosa, N., Hösel, M., Angmo, D., & Krebs, F. C. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02728j · Cited by 496
Laminated Carbon Nanotube Networks for Metal Electrode-Free Efficient Perovskite Solar Cells
Li, Z., Kulkarni, S. A., Boix, P. P., Shi, E., Cao, A., Fu, K., Batabyal, S. K., Zhang, J., Xiong, Q., Wong, L. H., et al. (2014) · ACS Nano · doi:10.1021/nn501096h · Cited by 492
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
Philippe, B., Park, B.-W., Lindblad, R., Oscarsson, J., Ahmadi, S., Johansson, E. M. J., & Rensmo, H. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00348 · Cited by 462
Yu, Z., & Sun, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500213 · Cited by 462
Leijtens, T., Stranks, S. D., Eperon, G. E., Lindblad, R., Johansson, E. M. J., McPherson, I. J., Rensmo, H., Ball, J. M., Lee, M. M., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn502115k · Cited by 426
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
Pathak, S. K., Abate, A., Ruckdeschel, P., Roose, B., Gödel, K. C., Vaynzof, Y., Santhala, A., Watanabe, S., Hollman, D. J., Noel, N., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401658 · Cited by 376
Song, J., Zheng, E., Bian, J., Wang, X.-F., Tian, W., Sanehira, Y., & Miyasaka, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01207d · Cited by 366
Schmidt, T. M., Larsen‐Olsen, T. T., Carlé, J. E., Angmo, D., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500569 · Cited by 336
Zhao, C., Chen, B., Qiao, X., Luan, L., Lu, K., & Hu, B. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500279 · Cited by 334
Bi, C., Shao, Y., Yuan, Y., Xiao, Z., Wang, C., Gao, Y., & Huang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04007d · Cited by 316
Zheng, L., Chung, Y.-H., Ma, Y., Zhang, L., Xiao, L., Chen, Z., Wang, S., Qu, B., & Gong, Q. (2014) · Chem. Commun. · doi:10.1039/c4cc04680c · Cited by 275
Tavakoli, M. M., Gu, L., Gao, Y., Reckmeier, C., He, J., Rogach, A. L., Yao, Y., & Fan, Z. (2015) · Scientific Reports · doi:10.1038/srep14083 · Cited by 259
Engineering of Electron-Selective Contact for Perovskite Solar Cells with Efficiency Exceeding 15%
Hu, Q., Wu, J., Jiang, C., Liu, T., Que, X., Zhu, R., & Gong, Q. (2014) · ACS Nano · doi:10.1021/nn5029828 · Cited by 245
Wei, H., Xiao, J., Yang, Y., Lv, S., Shi, J., Xu, X., Dong, J., Luo, Y., Li, D., & Meng, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.042 · Cited by 236
Temperature dependence of hole conductor free formamidinium lead iodide perovskite based solar cells
Aharon, S., Dymshits, A., Rotem, A., & Etgar, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05149a · Cited by 228
Wearable Double‐Twisted Fibrous Perovskite Solar Cell
Li, R., Xiang, X., Tong, X., Zou, J., & Li, Q. (2015) · Advanced Materials · doi:10.1002/adma.201501333 · Cited by 216
Machui, F., Hösel, M., Li, N., Spyropoulos, G. D., Ameri, T., Søndergaard, R. R., Jørgensen, M., Scheel, A., Gaiser, D., Kreul, K., et al. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01222d · Cited by 199
Luo, P., Liu, Z., Xia, W., Yuan, C., Cheng, J., & Lu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5077588 · Cited by 193
Large scale deployment of polymer solar cells on land, on sea and in the air
Espinosa, N., Hösel, M., Jørgensen, M., & Krebs, F. C. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43212b · Cited by 181
Procedures and Practices for Evaluating Thin‐Film Solar Cell Stability
Roesch, R., Faber, T., von Hauff, E., Brown, T. M., Lira‐Cantu, M., & Hoppe, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501407 · Cited by 176
Long-term stability of dye solar cells
Harikisun, R., & Desilvestro, H. (2011) · Solar Energy · doi:10.1016/j.solener.2010.10.016 · Cited by 172
Wozny, S., Yang, M., Nardes, A. M., Mercado, C. C., Ferrere, S., Reese, M. O., Zhou, W. L., & Zhu, K. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01691 · Cited by 157
Atmospheric effects on the photovoltaic performance of hybrid perovskite solar cells
Sheikh, A. D., Bera, A., Haque, M. A., et al. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.01.023 · Cited by 136
Novel Photoelectrochemical Cell with Mesoscopic Electrodes Sensitized by Lead-Halide Compounds (2)
Kojima, A., Teshima, K., Miyasaka, T., & Shirai, Y. (2006) · ECS Meeting Abstracts · doi:10.1149/ma2006-02/7/397 · Cited by 135
Organic–inorganic lead halide perovskite solar cell materials: A possible stability problem
Schoonman, J. (2014) · Chemical Physics Letters · doi:10.1016/j.cplett.2014.11.063 · Cited by 121
Zhang, M., Lyu, M., Yu, H., Yun, J., Wang, Q., & Wang, L. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201404427 · Cited by 119
Yan, W., Li, Y., Li, Y., Ye, S., Liu, Z., Wang, S., Bian, Z., & Huang, C. (2015) · Nano Research · doi:10.1007/s12274-015-0755-5 · Cited by 100
Polymer electrolytes and perovskites: lights and shadows in photovoltaic devices
Bella, F. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.02.195 · Cited by 96
Tanenbaum, D. M., Dam, H. F., Rösch, R., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.09.064 · Cited by 94
Sfyri, G., Kumar, C. V., Raptis, D., Dracopoulos, V., & Lianos, P. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.11.034 · Cited by 59
Cited by
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Dimensional tailoring of hybrid perovskites for photovoltaics
Grancini, G., & Nazeeruddin, M. K. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0065-0 · Cited by 978
Role of Phenolic Compounds in Human Disease: Current Knowledge and Future Prospects
Rahman, M. M., Rahaman, M. S., Islam, M. R., Rahman, F., Mithi, F. M., Alqahtani, T., Almikhlafi, M. A., Alghamdi, S. Q., Alruwaili, A. S., Hossain, M. S., et al. (2021) · Molecules · doi:10.3390/molecules27010233 · Cited by 852
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Marronnier, A., Roma, G., Boyer-Richard, S., Pedesseau, L., Jancu, J.-M., Bonnassieux, Y., Katan, C., Stoumpos, C. C., Kanatzidis, M. G., & Even, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b00267 · Cited by 753
Metadata
- Authors
- Wang, D., Wright, M., Elumalai, N. K., & Uddin, A.
- Venue
- Solar Energy Materials and Solar Cells
- Publisher
- Elsevier BV
- Published
- 2016-04
- Volume
- 147
- Pages
- 255-275
- ISSN
- 0927-0248 (ISSN-L)
- OpenAlex
- W2230864058
- Cited by
- 998
- References
- 105
- FWCI
- 51.99
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.