The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Current challenges and future prospects for a highly efficient (>20%) kesterite CZTS solar cell: A review
Abstract
Abstract CZTS has kesterite structure and the composition's formula is Cu2ZnSn(S/Se)4. The efficiency of CZTS-Se (Copper Zinc Tin-Sulphur-Selenium) solar cell, ∼12.6%, is much lower than the efficiency of CIGS (Copper Indium Gallium Selenium) solar cell, ∼22.6%. But the CZTS-Se may be the counterpart of the CIGS and the efficiency may be increased up to 32.2% as theoretically predicted by the Shockley-Queisser (SQ) limit. In solar cell technology, it has been depicted that the efficiency of the solar are affected by the two parameters: (i) variation of the solar insolation and (ii) quality of the materials. Besides this, the narrow phase stability of quaternary phases, unfavorable band alignments, mid-gap states and band tails are main reasons of deficit in the efficiency of kesterite due to the coexistence of the secondary and ternary phases, carrier recombination at the interfaces, defects and series resistances. As a result, the kesterite solar cell has the fluctuated open circuit voltage and the loss of energy. In addition to this, the champion CZTS-Se solar cell is not so environmental friendly because Se is the toxic and the rare earth element. This review provides the vital approaches by discussing the proper materials processing and the appropriate solution to enhance the efficiency of kesterite (CZTS, CZTSe and CZTS/Se) solar cells. Due to the large area quality, high absorption and low-cost materials of the kesterite, it may be used directly in harvesting the solar energy. We have also discussed how to reduce the recombination of the electron-hole pairs by using the interfacial layer so that the efficiency of the kesterite solar cells can be improved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
The work function of the elements and its periodicity
Michaelson, H. B. (1977) · Journal of Applied Physics · doi:10.1063/1.323539 · Cited by 4,289
Fundamentals of zinc oxide as a semiconductor
Janotti, A., & Van de Walle, C. G. (2009) · Reports on Progress in Physics · doi:10.1088/0034-4885/72/12/126501 · Cited by 3,948
Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% Efficiency
Wang, W., Winkler, M. T., Gunawan, O., Gokmen, T., Todorov, T. K., Zhu, Y., & Mitzi, D. B. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301465 · Cited by 3,183
Screened hybrid density functionals applied to solids
Paier, J., Marsman, M., Hummer, K., Kresse, G., Gerber, I. C., & Ángyán, J. G. (2006) · The Journal of Chemical Physics · doi:10.1063/1.2187006 · Cited by 2,457
Mechanics of composite materials
(1999) · Choice Reviews Online · doi:10.5860/choice.36-5715 · Cited by 2,344
19·9%‐efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factor
Repins, I., Contreras, M. A., Egaas, B., DeHart, C., Scharf, J., Perkins, C. L., To, B., & Noufi, R. (2008) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.822 · Cited by 2,022
High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber
Todorov, T. K., Reuter, K. B., & Mitzi, D. B. (2010) · Advanced Materials · doi:10.1002/adma.200904155 · Cited by 1,132
Development of CZTS-based thin film solar cells
Katagiri, H., Jimbo, K., Maw, W. S., Oishi, K., Yamazaki, M., Araki, H., & Takeuchi, A. (2009) · Thin Solid Films · doi:10.1016/j.tsf.2008.11.002 · Cited by 1,124
CRC handbook of chemistry and physics: a ready-reference book of chemical and physical data
(1995) · Choice Reviews Online · doi:10.5860/choice.32-3627 · Cited by 1,015
Electrical and Optical Properties of Stannite-Type Quaternary Semiconductor Thin Films
Nakazawa, K. I. (1988) · Japanese Journal of Applied Physics · doi:10.1143/jjap.27.2094 · Cited by 982
Katagiri, H., Jimbo, K., Yamada, S., Kamimura, T., Maw, W. S., Fukano, T., Ito, T., & Motohiro, T. (2008) · Applied Physics Express · doi:10.1143/apex.1.041201 · Cited by 807
Intrinsic point defects and complexes in the quaternary kesterite semiconductorCu2ZnSnS4
Chen, S., Yang, J.-H., Gong, X. G., Walsh, A., & Wei, S.-H. (2010) · Physical Review B · doi:10.1103/physrevb.81.245204 · Cited by 740
Chen, S., Gong, X. G., Walsh, A., & Wei, S.-H. (2009) · Applied Physics Letters · doi:10.1063/1.3074499 · Cited by 723
Kesterite Thin‐Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4
Walsh, A., Chen, S., Wei, S., & Gong, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100630 · Cited by 695
Co-evaporated Cu2ZnSnSe4 films and devices
Repins, I., Beall, C., Vora, N., DeHart, C., Kuciauskas, D., Dippo, P., To, B., Mann, J., Hsu, W.-C., Goodrich, A., et al. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.01.008 · Cited by 608
Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells
Kumar, M., Dubey, A., Adhikari, N., Venkatesan, S., & Qiao, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02153g · Cited by 583
Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS4
Chen, S., Gong, X. G., Walsh, A., & Wei, S.-H. (2010) · Applied Physics Letters · doi:10.1063/1.3275796 · Cited by 570
Cu2ZnSnS4as a potential photovoltaic material: A hybrid Hartree-Fock density functional theory study
Paier, J., Asahi, R., Nagoya, A., & Kresse, G. (2009) · Physical Review B · doi:10.1103/physrevb.79.115126 · Cited by 441
(1979) · Springer Tracts in Modern Physics · doi:10.1007/bfb0048918 · Cited by 395
Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells
Gunawan, O., Todorov, T. K., & Mitzi, D. B. (2010) · Applied Physics Letters · doi:10.1063/1.3522884 · Cited by 395
Elements of Physical Chemistry
Atkins, P., de Paula, J., & Smith, D. (2016) · Oxford University Press eBooks · doi:10.1093/hesc/9780198727873.001.0001 · Cited by 370
Sprayed films of stannite Cu2ZnSnS4
Nakayama, N., & Ito, K. (1996) · Applied Surface Science · doi:10.1016/0169-4332(95)00225-1 · Cited by 345
CRC Handbook of chemistry and physics. A ready-reference book of chemical and physical data
Weast, R. C., Astle, M. J., Beyer, W. H., Selby, S. M., Lide, D. R., Frederikse, H. P. R., Haynes, W. M., & Bruno, T. J. (1965) · Virtual Defense Library (Ministerio de Defensa) · Cited by 337
Wurtzite-derived polytypes of kesterite and stannite quaternary chalcogenide semiconductors
Chen, S., Walsh, A., Luo, Y., Yang, J.-H., Gong, X. G., & Wei, S.-H. (2010) · Physical Review B · doi:10.1103/physrevb.82.195203 · Cited by 323
Shin, B., Zhu, Y., Bojarczuk, N. A., Chey, S. J., & Guha, S. (2012) · Applied Physics Letters · doi:10.1063/1.4740276 · Cited by 322
Tanaka, K., Fukui, Y., Moritake, N., & Uchiki, H. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.10.031 · Cited by 311
Towards low-cost, environmentally friendly printed chalcopyrite and kesterite solar cells
Azimi, H., Hou, Y., & Brabec, C. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43865a · Cited by 225
Kësterite thin films for photovoltaics : a review
Delbos, S. (2012) · EPJ Photovoltaics · doi:10.1051/epjpv/2012008 · Cited by 210
Contribution of solar radiation to decadal temperature variability over land
Wang, K., & Dickinson, R. E. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1311433110 · Cited by 174
CZTS-based materials and interfaces and their effects on the performance of thin film solar cells
Huang, T. J., Yin, X., Qi, G., & Gong, H. (2014) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201409219 · Cited by 171
Patel, M., Mukhopadhyay, I., & Ray, A. (2012) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/45/44/445103 · Cited by 168
Photoluminescence and electrical study of fluctuating potentials in Cu 2 ZnSnS 4 -based thin films
Leitão, J. P., Santos, N. M., Fernandes, P. A., Salomé, P. M. P., da Cunha, A. F., Gonzalez, J. C., Ribeiro, G. M., & Matinaga, F. M. (2011) · Physical Review B · doi:10.1103/physrevb.84.024120 · Cited by 153
Abermann, S. (2013) · Solar Energy · doi:10.1016/j.solener.2013.04.017 · Cited by 147
Zeng, X. J., Tai, K. F., Zhang, T., Ho, C. W. J., Chen, X., Huan, C. H. A., Sum, T. C., & Wong, L. H. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.01.029 · Cited by 111
The Elements of Physical Chemistry
Morgan, J. L. R. (2009) · Medical Entomology and Zoology · Cited by 98
LEIDHEISER, H. J. (1970) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(70)90091-3 · Cited by 74
Bhosale, S. M., Suryawanshi, M. P., Gaikwad, M. A., Bhosale, P. N., Kim, J. H., & Moholkar, A. V. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.04.131 · Cited by 70
Zhang, X., Guo, G., Ji, C., Huang, K., Zha, C., Wang, Y., Shen, L., Gupta, A., & Bao, N. (2014) · Scientific Reports · doi:10.1038/srep05086 · Cited by 66
Toward a high Cu2ZnSnS4 solar cell efficiency processed by spray pyrolysis method
Vigil‐Galán, O., Courel, M., Espíndola-Rodríguez, M., Izquierdo‐Roca, V., Saucedo, E., & Fairbrother, A. (2013) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4825253 · Cited by 41
Kato, T., Sakai, N., & Sugimoto, H. (2013) · PubMed · doi:10.4229/28theupvsec2013-3ao.5.1 · Cited by 19
Metadata
- Authors
- Pal, K., Singh, P., Bhaduri, A., & Thapa, K. B.
- Venue
- Solar Energy Materials and Solar Cells
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 196
- Pages
- 138-156
- ISSN
- 0927-0248 (ISSN-L)
- OpenAlex
- W2935497437
- Cited by
- 254
- References
- 41
- FWCI
- 11.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.