The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing
Abstract
Abstract In the present study Inconel 625 alloy fabricated using Cold Metal Transfer (CMT) Wire Arc Additive Manufacturing (WAAM) has been investigated. The microstructure and mechanical properties of the fabricated Inconel625 alloy, and the influence of torch travel speed on the properties of the manufactured specimens were researched. Microstructural studies revealed variation in microstructure in different layers of the specimen, with the bottom layer consisting of fine primary cellular grains. Mechanical properties that include hardness and tensile properties showed that with the increase in the travel speed, average micro-hardness of the manufactured specimens slightly improved from 248 HV to 253 HV. The ultimate tensile strength (UTS) increased from 647 MPa to 687 MPa, while yield strength (YS) increased from 376 MPa to 400 MPa. Results showed that the mechanical performance of the manufactured components by CMT-WAAM method was better than the mechanical properties of Inconel 625 alloy casting parts except UTS, which demonstrated that the Inconel 625 alloys can be fabricated by cold metal transfer process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
Zhang, D., Niu, W., Cao, X., & Liu, Z. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.06.021 · Cited by 723
Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
Li, S., Wei, Q., Shi, Y., Zhu, Z., & Zhang, D. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2014.09.020 · Cited by 526
Leary, M., Mazur, M., Williams, H., Yang, E., Alghamdi, A., Lozanovski, B., Zhang, X., Shidid, D., Farahbod-Sternahl, L., Witt, G., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.010 · Cited by 456
Wang, J. F., Sun, Q. J., Wang, H., Liu, J. P., & Feng, J. C. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.09.015 · Cited by 282
The Hardness of Additively Manufactured Alloys
Zuback, J. S., & DebRoy, T. (2018) · Materials · doi:10.3390/ma11112070 · Cited by 178
Ramkumar, K. D., Abraham, W. S., Viyash, V., Arivazhagan, N., & Rabel, A. M. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.12.018 · Cited by 142
Thivillon, L., Bertrand, P., Laget, B., et al. (2008) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2008.11.023 · Cited by 127
Microstructure of laser cladded carbide reinforced Inconel 625 alloy for turbine blade application
Huebner, J., Kata, D., Kusinski, J. P., Rutkowski, P., & Lis, J. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.03.194 · Cited by 87
Cited by
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Treutler, K., & Wesling, V. (2021) · Applied Sciences · doi:10.3390/app11188619 · Cited by 293
Sword, J. I., Galloway, A., & Toumpis, A. (2024) · Sustainability · doi:10.3390/su16104178 · Cited by 14
Metadata
- Authors
- Yangfan, W., Xizhang, C., & Chuanchu, S.
- Venue
- Surface and Coatings Technology
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 374
- Pages
- 116-123
- ISSN
- 0257-8972 (ISSN-L)
- OpenAlex
- W2947813779
- Cited by
- 298
- References
- 11
- FWCI
- 14.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing. https://app.cochat.ai/papers/10.1016/j.surfcoat.2019.05.079
- The paper
- Yangfan, W., Xizhang, C., & Chuanchu, S. (2019). Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing. Surface and Coatings Technology. https://doi.org/10.1016/j.surfcoat.2019.05.079
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
