The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes
Abstract
Abstract Additive Manufacture (AM) enables the fabrication of highly complex lattice structures with exceptional engineering properties. Inconel is a technically useful material in that it provides high resistance to oxidisation, creep and loss of mechanical properties at elevated temperatures. The combination of Inconel material properties and the geometric freedom of AM provides a unique opportunity for the fabrication of engineered structures with exceptional strength and stiffness at elevated temperatures, as for example is required for high temperature turbomachinery. Despite the associated technical opportunities, there exists no design data on the mechanical response, deformation characteristics and failure modes of AM Inconel 625 lattice structures. This research provides a comprehensive reference for the mechanical response of Inconel 625 lattice structures fabricated by Selective Laser Melting (SLM). Furthermore, the high ductility of Inconel 625 lattice enables novel insight into the structural mechanics of AM lattice, and the associated deformation photography provides a reference for the validation and verification of numerical models of AM lattice behaviour.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Self-citationBenedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Self-citationKhan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
Metadata
- Authors
- Leary, M., Mazur, M., Williams, H., Yang, E., Alghamdi, A., Lozanovski, B., Zhang, X., Shidid, D., Farahbod-Sternahl, L., Witt, G., Kelbassa, I., Choong, P., Qian, M., & Brandt, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 157
- Pages
- 179-199
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2810693877
- Cited by
- 456
- References
- 1
- FWCI
- 19.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes. https://app.cochat.ai/papers/10.1016/j.matdes.2018.06.010
- The paper
- Leary, M., Mazur, M., Williams, H., Yang, E., Alghamdi, A., Lozanovski, B., Zhang, X., Shidid, D., Farahbod-Sternahl, L., Witt, G., Kelbassa, I., Choong, P., Qian, M., & Brandt, M. (2018). Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes. Materials & Design. https://doi.org/10.1016/j.matdes.2018.06.010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
