The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying
Abstract
Abstract FeCoNiCrMn high entropy alloy coatings were deposited on steel substrate by atmospheric plasma spraying at different H2 flow rates and subsequently annealed. The microstructure and the phase composition of the prepared coatings were investigated, and the hardness of the coating was determined. The wear behavior of the as-sprayed and annealed FeCoNiCrMn coatings against WC-Co ball was evaluated under dry sliding condition. The results show that the fluffy structures characterized on the surfaces of as-sprayed coatings were formed due to the volatilization and oxidation of Mn element. The coatings were single FCC phase along with some oxides. The wear rate of the as-sprayed coatings was reduced by half as the H2 flow rate increasing from 3 to 6 L/min. Annealing can greatly improve the wear resistance and scratch resistance of the as-sprayed coatings. The characterization of wear tracks demonstrates that splat spalling was the dominating wear mechanism for the as-sprayed coatings. The improvement of wear resistance by increasing H2 flow rate and annealing was attributed to the enhancement of cohesive strength among splats.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Cited by
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Metadata
- Authors
- Xiao, J.-K., Tan, H., Wu, Y.-Q., Chen, J., & Zhang, C.
- Venue
- Surface and Coatings Technology
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 385
- Pages
- 125430
- ISSN
- 0257-8972 (ISSN-L)
- OpenAlex
- W3003289722
- Cited by
- 193
- References
- 1
- FWCI
- 11.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying. https://app.cochat.ai/papers/10.1016/j.surfcoat.2020.125430
- The paper
- Xiao, J.-K., Tan, H., Wu, Y.-Q., Chen, J., & Zhang, C. (2020). Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying. Surface and Coatings Technology. https://doi.org/10.1016/j.surfcoat.2020.125430
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.