The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings
Abstract
Abstract High-speed laser cladding technology can significantly improve the efficiency of coating preparation and effectively widen the application range of laser cladding. In this study, the Ni45 powders were deposited on steel substrate by traditional low speed laser cladding and high-speed laser cladding process, respectively. The cladding efficiency, surface forming, cross-sectional microstructure, microhardness, wear and corrosion resistance properties of the traditional and high-speed laser cladded Ni45 alloy coatings were compared. It can be seen that the thickness of the high-speed laser cladding coating was much thinner than that of the traditional laser cladding coating. Compared with traditional laser cladding, high-speed laser cladding could achieve a cladding speed of 76.86 m/min and a cladding efficiency of 156.79 cm2/min. The microstructure of the two kinds of coatings shows the same growth law, but the microstructure in high-speed laser cladding was smaller and denser, and the columnar crystal interval was narrower, only about 6 μm. It is found that the cooling rate of the traditional laser cladding coating was smaller than that of the high-speed laser cladding, and as the cladding speed increased, the cooling rate became higher and higher. The cross-section microhardness of the traditional laser cladding coating was relatively uniform of 337 HV0.2, while the microhardness of high-speed laser cladding surface increased to about 543 HV0.2. In addition, the wear and corrosion resistance of high-speed laser cladded coatings were better than that of traditional laser cladded coatings. As the cladding speed increased, the wear and corrosion resistance of the cladded coatings became better.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chalmers, B. (1970) · Applied Solid State Physics · doi:10.1007/978-1-4684-1854-5_5 · Cited by 1,297
Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping
Liu, W., & DuPont, J. N. (2003) · Scripta Materialia · doi:10.1016/s1359-6462(03)00020-4 · Cited by 379
EHLA: Extreme High‐Speed Laser Material Deposition
Schopphoven, T., Gasser, A., & Backes, G. (2017) · Laser Technik Journal · doi:10.1002/latj.201700020 · Cited by 142
Milling force and surface morphology of 45 steel under different Al2O3 nanofluid concentrations
Duan, Z., Yin, Q., Li, C., Dong, L., Bai, X., Zhang, Y., Yang, M., Jia, D., Li, R., & Liu, Z. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-04969-9 · Cited by 140
Self-citationXu, Q., Zhang, Y., Liu, S.-H., Li, C., & Li, C. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126093 · Cited by 109
Gatto, N. M., Kelsh, M. A., Ha, D., Suh, M., & Proctor, D. M. (2010) · Cancer Epidemiology · doi:10.1016/j.canep.2010.03.013 · Cited by 98
Characterization of Powder-Precursor HVOF-Sprayed Al2O3-YSZ/ZrO2 Coatings
Kiilakoski, J., Puranen, J., Heinonen, E., Koivuluoto, H., & Vuoristo, P. M. J. (2018) · Journal of Thermal Spray Technology · doi:10.1007/s11666-018-0816-x · Cited by 29
Improvement of Corrosion Resistance of 13CrMo4-5 Steel by Ni-Based Laser Cladding Coatings
Koclęga, D., Radziszewska, A. E., Dymek, S., Morgiel, J., Maj, Ł., & Kranzmann, A. (2020) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-020-04867-x · Cited by 17
Cited by
High Temperature Corrosion Resistant and Anti-slagging Coatings for Boilers: A Review
Khantisopon, K., Singh, S., Jitputti, J., Berndt, C. C., & Ang, A. S. M. (2024) · High Temperature Corrosion of Materials · doi:10.1007/s11085-024-10251-0 · Cited by 30
Metadata
- Authors
- Yuan, W., Li, R., Chen, Z., Gu, J., & Tian, Y.
- Venue
- Surface and Coatings Technology
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 405
- Pages
- 126582
- ISSN
- 0257-8972 (ISSN-L)
- OpenAlex
- W3096045783
- Cited by
- 363
- References
- 8
- FWCI
- 17.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings. https://app.cochat.ai/papers/10.1016/j.surfcoat.2020.126582
- The paper
- Yuan, W., Li, R., Chen, Z., Gu, J., & Tian, Y. (2021). A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings. Surface and Coatings Technology. https://doi.org/10.1016/j.surfcoat.2020.126582
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.