The DOI matches its Crossref record; 268 of the 268 references it cites were found in a registry or an index.
Iron oxide surfaces
Open accessAbstract
The current status of knowledge regarding the surfaces of the iron oxides, magnetite (Fe3O4), maghemite (γ-Fe2O3), haematite (α-Fe2O3), and wustite (Fe1−xO) is reviewed. The paper starts with a summary of applications where iron oxide surfaces play a major role, including corrosion, catalysis, spintronics, magnetic nanoparticles (MNPs), biomedicine, photoelectrochemical water splitting and groundwater remediation. The bulk structure and properties are then briefly presented; each compound is based on a close-packed anion lattice, with a different distribution and oxidation state of the Fe cations in interstitial sites. The bulk defect chemistry is dominated by cation vacancies and interstitials (not oxygen vacancies) and this provides the context to understand iron oxide surfaces, which represent the front line in reduction and oxidation processes. Fe diffuses in and out from the bulk in response to the O2 chemical potential, forming sometimes complex intermediate phases at the surface. For example, α-Fe2O3 adopts Fe3O4-like surfaces in reducing conditions, and Fe3O4 adopts Fe1−xO-like structures in further reducing conditions still. It is argued that known bulk defect structures are an excellent starting point in building models for iron oxide surfaces. The atomic-scale structure of the low-index surfaces of iron oxides is the major focus of this review. Fe3O4 is the most studied iron oxide in surface science, primarily because its stability range corresponds nicely to the ultra-high vacuum environment. It is also an electrical conductor, which makes it straightforward to study with the most commonly used surface science methods such as photoemission spectroscopies (XPS, UPS) and scanning tunneling microscopy (STM). The impact of the surfaces on the measurement of bulk properties such as magnetism, the Verwey transition and the (predicted) half-metallicity is discussed. The best understood iron oxide surface at present is probably Fe3O4(100); the structure is known with a high degree of precision and the major defects and properties are well characterised. A major factor in this is that a termination at the Feoct–O plane can be reproducibly prepared by a variety of methods, as long as the surface is annealed in 10−7−10−5 mbar O2 in the final stage of preparation. Such straightforward preparation of a monophase termination is generally not the case for iron oxide surfaces. All available evidence suggests the oft-studied (√2×√2)R45° reconstruction results from a rearrangement of the cation lattice in the outermost unit cell in which two octahedral cations are replaced by one tetrahedral interstitial, a motif conceptually similar to well-known Koch–Cohen defects in Fe1−xO. The cation deficiency results in Fe11O16 stoichiometry, which is in line with the chemical potential in ultra-high vacuum (UHV), which is close to the border between the Fe3O4 and Fe2O3 phases. The Fe3O4(111) surface is also much studied, but two different surface terminations exist close in energy and can coexist, which makes sample preparation and data interpretation somewhat tricky. Both the Fe3O4(100) and Fe3O4(111) surfaces exhibit Fe-rich terminations as the sample selvedge becomes reduced. The Fe3O4(110) surface forms a one-dimensional (1×3) reconstruction linked to nanofaceting, which exposes the more stable Fe3O4(111) surface. α-Fe2O3(0001) is the most studied haematite surface, but difficulties preparing stoichiometric surfaces under UHV conditions have hampered a definitive determination of the structure. There is evidence for at least three terminations: a bulk-like termination at the oxygen plane, a termination with half of the cation layer, and a termination with ferryl groups. When the surface is reduced the so-called “bi-phase” structure is formed, which eventually transforms to a Fe3O4(111)-like termination. The structure of the bi-phase surface is controversial; a largely accepted model of coexisting Fe1−xO and α-Fe2O3(0001) islands was recently challenged and a new structure based on a thin film of Fe3O4(111) on α-Fe2O3(0001) was proposed. The merits of the competing models are discussed. The α-Fe2O3(1 1 ¯ 02) “R-cut” surface is recommended as an excellent prospect for future study given its apparent ease of preparation and its prevalence in nanomaterial. In the latter sections the literature regarding adsorption on iron oxides is reviewed. First, the adsorption of molecules (H2, H2O, CO, CO2, O2, HCOOH, CH3OH, CCl4, CH3I, C6H6, SO2, H2S, ethylbenzene, styrene, and Alq3) is discussed, and an attempt is made to relate this information to the reactions in which iron oxides are utilized as a catalyst (water–gas shift, Fischer–Tropsch, dehydrogenation of ethylbenzene to styrene) or catalyst supports (CO oxidation). The known interactions of iron oxide surfaces with metals are described, and it is shown that the behaviour is determined by whether the metal forms a stable ternary phase with the iron oxide. Those that do not, (e.g. Au, Pt, Ag, Pd) prefer to form three-dimensional particles, while the remainder (Ni, Co, Mn, Cr, V, Cu, Ti, Zr, Sn, Li, K, Na, Ca, Rb, Cs, Mg, Ca) incorporate within the oxide lattice. The incorporation temperature scales with the heat of formation of the most stable metal oxide. A particular effort is made to underline the mechanisms responsible for the extraordinary thermal stability of isolated metal adatoms on Fe3O4 surfaces, and the potential application of this model system to understand single atom catalysis and sub-nano cluster catalysis is discussed. The review ends with a brief summary, and a perspective is offered including exciting lines of future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–268 of 268
Scanning probe microscopy of oxide surfaces: atomic structure and properties
Bonnell, D. A., & Garra, J. (2008) · Reports on Progress in Physics · doi:10.1088/0034-4885/71/4/044501 · Cited by 80
The role of vanadium on the properties of iron based catalysts for the water gas shift reaction
JÚNIOR, I. D. O. L., Millet, J. M. M., Aouine, M., & Rangel, M. D. C. (2005) · Applied Catalysis A General · doi:10.1016/j.apcata.2004.12.038 · Cited by 78
Tinkle, M. (1987) · Journal of Catalysis · doi:10.1016/0021-9517(87)90093-5 · Cited by 78
Point defects and transport in haematite (Fe2O3-ε)
Dieckmann, R. (1993) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418619308213994 · Cited by 77
Water adsorption and growth of ice on epitaxial Fe3O4(111), FeO(111) and Fe2O3(biphase)
Leist, U., Ranke, W., & Al‐Shamery, K. (2003) · Physical Chemistry Chemical Physics · doi:10.1039/b212163h · Cited by 76
A LEED analysis of the clean surfaces of α-Fe2O3(0001) and α-Cr2O3(0001) bulk single crystals
Lübbe, M., & Moritz, W. (2009) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/21/13/134010 · Cited by 76
CO Oxidation on Gold-Supported Iron Oxides: New Insights into Strong Oxide–Metal Interactions
Yu, L., Liu, Y., Yang, F., Evans, J., Rodríguez, J. A., & Liu, P. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b03315 · Cited by 74
Subbaraman, R., Deshmukh, S. A., & Sankaranarayanan, S. K. R. S. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp312514m · Cited by 74
Grønvold, F., & Sveen, A. (1974) · The Journal of Chemical Thermodynamics · doi:10.1016/0021-9614(74)90230-4 · Cited by 71
Fe3O4(001) films on Fe(001) : Termination and reconstruction of iron-rich surfaces
Spiridis, N., Barbasz, J., Łodziana, Z., & Korecki, J. (2006) · Physical Review B · doi:10.1103/physrevb.74.155423 · Cited by 71
Autocatalytic partial reduction of FeO(111) and Fe3O4(111) films by atomic hydrogen
Huang, W., & Ranke, W. (2005) · Surface Science · doi:10.1016/j.susc.2005.11.026 · Cited by 70
Spin-resolved photoelectron spectroscopy of Fe3O4
Morton, S. A., Waddill, G. D., Kim, S., Schuller, I. K., Chambers, S. A., & Tobin, J. G. (2002) · Surface Science · doi:10.1016/s0039-6028(02)01824-1 · Cited by 69
Egger, K., & FEITKNECHT, W. (1962) · Helvetica Chimica Acta · doi:10.1002/hlca.19620450642 · Cited by 68
Adsorption of Formic Acid on the Fe3O4(001) Surface
Gamba, O., Noei, H., Pavelec, J., Bliem, R., Schmid, M., Diebold, U., Stierle, A., & Parkinson, G. S. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b05560 · Cited by 67
Self-citationHydroxylation of the Rutile TiO 2 (110) Surface Enhancing Its Reducing Power for Photocatalysis
Zhang, D., Yang, M., & Dong, S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp510427v · Cited by 66
Özdemir, Ö., Xu, S., & Dunlop, D. J. (1995) · Journal of Geophysical Research Atmospheres · doi:10.1029/94jb02874 · Cited by 66
Warschkow, O., Ellis, D. E., Hwang, J., et al. (2002) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2002.tb00068.x · Cited by 66
Mechanism of Low Temperature Oxidation of Magnetites
Colombo, U., Fagherazzi, G., Gazzarrini, F., Lanzavecchia, G., & Sironi, G. (1968) · Nature · doi:10.1038/2191036a0 · Cited by 65
Morphology and CO adsorption on platinum supported on thin Fe3O4(111) films
Qin, Z., Lewandowski, M., Sun, Y.-N., Shaikhutdinov, S. K., & Freund, H.-J. (2009) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/21/13/134019 · Cited by 65
Spin-resolved photoemission studies of epitaxial Fe3O4(100) thin films
Huang, D. J., Chang, C. F., Chen, J., Tjeng, L. H., Rata, A. D., Wu, W., Chung, S. C., Lin, H. J., Hibma, T., & Chen, C. T. (2002) · Journal of Magnetism and Magnetic Materials · doi:10.1016/s0304-8853(01)00591-1 · Cited by 65
DFT studies of Cr(VI) complex adsorption on hydroxylated hematite () surfaces
Yin, S., & Ellis, D. E. (2009) · Surface Science · doi:10.1016/j.susc.2009.01.015 · Cited by 62
Single Gold Atom Adsorption on the Fe3O4(111) Surface
Yu, X., Wang, S., Li, Y., et al. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp301313u · Cited by 62
Hydrated α-Fe2O3 surface structure: Role of surface preparation
Tanwar, K. S., Catalano, J. G., Petitto, S. C., Ghose, S., Eng, P. J., & Trainor, T. P. (2007) · Surface Science · doi:10.1016/j.susc.2007.04.115 · Cited by 61
Mechanistic Study on Water Gas Shift Reaction on the Fe3O4 (111) Reconstructed Surface
Huang, L. W., Han, B., Zhang, Q., Fan, M., & Cheng, H. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b09192 · Cited by 60
Activating Nonreducible Oxides via Doping
Nilius, N., & Freund, H. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00018 · Cited by 59
Density Functional Theory Study of Water Dissociative Chemisorption on the Fe3O4(111) Surface
Zhou, C., Zhang, Q., Chen, L., Han, B., Ni, G., Wu, J., Garg, D., & Cheng, H. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp105040v · Cited by 59
Zhang, D., Li, H., Li, G., & Chen, J. (2009) · Dalton Transactions · doi:10.1039/b915232f · Cited by 52
Quantitative Structural Studies Of Corundum and Rocksalt Oxide Surfaces
Woodruff, D. P. (2013) · Chemical Reviews · doi:10.1021/cr3002998 · Cited by 52
Oxidation of Magnetite(100) to Hematite Observed by in Situ Spectroscopy and Microscopy
McCarty, K. F., Monti, M., Nie, S., et al. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5037603 · Cited by 52
Valence-band structure of epitaxially grown Fe3O4(111) films
Cai, Y. Q., Ritter, M., Weiß, W., & Bradshaw, A. M. (1998) · Physical review. B, Condensed matter · doi:10.1103/physrevb.58.5043 · Cited by 50
Oxidation Pathways in Bicomponent Ultrathin Iron Oxide Films
Monti, M., Santos, B., Mascaraque, A., et al. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300702d · Cited by 48
Facile one-step synthesis of Ag@Fe3O4 core–shell nanospheres for reproducible SERS substrates
Sun, L., He, J., An, S., Zhang, J., & Ren, D. (2013) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2013.04.048 · Cited by 47
First-principles LSDF study of weak ferromagnetism in Fe 2 O 3
Sandratskii, L. M., & Kübler, J. (1996) · Europhysics Letters (EPL) · doi:10.1209/epl/i1996-00360-9 · Cited by 46
Wang, W., Mariot, J.-M., Richter, C., Heckmann, O., Ndiaye, W., Padova, P. D., Taleb-Ibrahimi, A., Fèvre, P. L., Bertran, F., Bondino, F., et al. (2013) · Physical Review B · doi:10.1103/physrevb.87.085118 · Cited by 46
Synthesis of Iron Oxide Nanorods Using a Template Mediated Approach
Kloust, H., Zierold, R., Merkl, J., Schmidtke, C., Feld, A., Pöselt, E., Kornowski, A., Nielsch, K., & Weller, H. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00513 · Cited by 46
Magnetite Oxidation: A Proposed Mechanism
Colombo, U., Gazzarrini, F., Lanzavecchia, G., et al. (1965) · Science · doi:10.1126/science.147.3661.1033 · Cited by 45
Transition from Order to Configurational Disorder for Surface Reconstructions on SrTiO3 (111)
Marks, L. D., Chiaramonti, A. N., Rahman, S., & Castell, M. R. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.226101 · Cited by 45
Wang, H., Kaden, W. E., Dowler, R., et al. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp41459g · Cited by 44
Millot, F., & Yan, N. (1997) · Journal of Physics and Chemistry of Solids · doi:10.1016/s0022-3697(96)00101-1 · Cited by 42
Cobalt oxide nanolayers on Pd(100): The thickness-dependent structural evolution
Gragnaniello, L., Agnoli, S., Parteder, G., Barolo, A., Bondino, F., Allegretti, F., Surnev, S. L., Granozzi, G., & Netzer, F. P. (2010) · Surface Science · doi:10.1016/j.susc.2010.08.012 · Cited by 42
Magnetoreception systems in birds: A review of current research
Kishkinev, D., & Chernetsov, N. (2015) · Biology Bulletin Reviews · doi:10.1134/s2079086415010041 · Cited by 42
Wiesendanger, R., Shvets, I. V., Bürgler, D. E., Tarrach, G., Güntherodt, H. ‐., & Coey, J. M. D. (1992) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/19/2/014 · Cited by 39
Growth of Fe3O4(001) thin films on Pt(100): Tuning surface termination with an Fe buffer layer
Davis, E. M., Zhang, K., Cui, Y., Kuhlenbeck, H., Shaikhutdinov, S. K., & Freund, H. (2015) · Surface Science · doi:10.1016/j.susc.2015.02.004 · Cited by 38
Fractional spin polarization in the model of photoemission from localized shells
Alvarado, S. F., & Bagus, P. S. (1978) · Physics Letters A · doi:10.1016/0375-9601(78)90343-2 · Cited by 37
Water Adsorption, Desorption, and Clustering on FeO(111)
Daschbach, J. L., Dohnálek, Z., Liu, S., Smith, R. S., & Kay, B. D. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp058013s · Cited by 36
Strain-Induced Defect Superstructure on the SrTiO3(110) Surface
Wang, Z., Li, F., Meng, S., et al. (2013) · Physical Review Letters · doi:10.1103/physrevlett.111.056101 · Cited by 36
Photoelectrochemical Hydrogen Production on α‐Fe2O3 (0001): Insights from Theory and Experiments
Baltrušaitis, J., Hu, Y., McFarland, E. W., & Hellman, A. (2013) · ChemSusChem · doi:10.1002/cssc.201300715 · Cited by 34
Yatom, N., & Toroker, M. C. (2015) · Molecules · doi:10.3390/molecules201119668 · Cited by 32
Direct observation of a positive spin polarization at the (111) surface of magnetite
Pratt, A., Kurahashi, M., Sun, X., Gilks, D., & Yamauchi, Y. (2012) · Physical Review B · doi:10.1103/physrevb.85.180409 · Cited by 32
Paul, M., Sing, M., Claessen, R., Schrupp, D., & Brabers, V. A. M. (2007) · Physical Review B · doi:10.1103/physrevb.76.075412 · Cited by 30
Becker, K. D., Wurmb, V. V., & Litterst, F. J. (1993) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(93)90220-l · Cited by 29
Adsorption of V on a hematite (0001) surface and its oxidation: Submonolayer coverage
Jin, J., Ma, X., Kim, C., et al. (2007) · Surface Science · doi:10.1016/j.susc.2007.05.028 · Cited by 29
Aggarwal, S., & Dieckmann, R. (2002) · Physics and Chemistry of Minerals · doi:10.1007/s00269-002-0282-2 · Cited by 28
Feng, Z., Kim, C., Elam, J. W., Ma, Q., Zhang, Z., & Bedzyk, M. J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja906816y · Cited by 28
Spin-resolved photoelectron spectroscopy of Fe3O4—revisited
Fonin, M., Dedkov, Y. S., Pentcheva, R., Rüdiger, U., & Guntherodt, G. (2008) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/20/14/142201 · Cited by 27
Adsorption of biomedical coating molecules, amino acids, and short peptides on magnetite (110)
Aschauer, U., & Selloni, A. (2015) · The Journal of Chemical Physics · doi:10.1063/1.4927327 · Cited by 26
Large hidden orbital moments in magnetite
Goering, E. J. (2011) · physica status solidi (b) · doi:10.1002/pssb.201147119 · Cited by 26
Electronic structure near cationic defects in magnetite
Arras, R., Warot-Fonrose, B., & Calmels, L. (2013) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/25/25/256002 · Cited by 25
Micromagnetism in (001) magnetite by spin-polarized low-energy electron microscopy
de la Figuera, J., Vergara, L., N’Diaye, A. T., Quesada, A., & Schmid, A. K. (2013) · Ultramicroscopy · doi:10.1016/j.ultramic.2013.02.020 · Cited by 23
Non-contact atomic force microscopy study of hydroxyl groups on the spinel MgAl 2 O 4 (100) surface
Canova, F. F., Foster, A. S., Rasmussen, M. K., Meinander, K., Besenbacher, F., & Lauritsen, J. V. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/32/325703 · Cited by 23
Henderson, M. A. (2003) · Geochimica et Cosmochimica Acta · doi:10.1016/s0016-7037(02)00884-0 · Cited by 19
Kurahashi, M., Entani, S., & Yamauchi, Y. (2008) · Review of Scientific Instruments · doi:10.1063/1.2949385 · Cited by 19
Adsorption of Au n (n = 1–4) clusters on Fe 3 O 4 (001) B-termination
Yu, X., Zhang, X., Wang, S., et al. (2015) · RSC Advances · doi:10.1039/c5ra06294b · Cited by 18
Initial nucleation of Au on the R45° reconstructed Fe3O4(001) surface
Jordan, K., Murphy, S., & Shvets, I. V. (2006) · Surface Science · doi:10.1016/j.susc.2006.08.044 · Cited by 17
Magnetite Oxidation: A Proposed Mechanism
Colombo, U., Gazzarrini, F., Lanzavecchia, G., et al. (1965) · Science · doi:10.1126/science.147.3661.1033.a · Cited by 17
Final state effects in the 3d-photoelectron spectrum of Fe3O4 and comparison with FexO
Alvarado, S. F., Erbudak, M., & Munz, P. (1977) · Physica B+C · doi:10.1016/0378-4363(77)90839-7 · Cited by 10
Nano-Magnetic Probing on Magnetite
Maris, G., Jdira, L., Hermsen, J. G. H., Murphy, S., Manai, G., Shvets, I. V., Speller, S., Hermsen, J. G. H., Murphy, S., Manai, G., et al. (2006) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2006.878405 · Cited by 8
Xiao, J., & Frauenheim, T. (2012) · Applied Physics Letters · doi:10.1063/1.4739935 · Cited by 5
Cited by
Single-Atom Catalysts Based on the Metal–Oxide Interaction
Lang, R., Du, X., Huang, Y., Jiang, X., Zhang, Q., Guo, Y., Liu, K., Qiao, B., Wang, A., & Zhang, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00797 · Cited by 1,087
Sabatier principle of metal-support interaction for design of ultrastable metal nanocatalysts
Hu, S., & Li, W.-X. (2021) · Science · doi:10.1126/science.abi9828 · Cited by 821
Development and Recent Progress on Ammonia Synthesis Catalysts for Haber–Bosch Process
Humphreys, J., Lan, R., & Tao, S. (2021) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202000043 · Cited by 653
The Materials Science behind Sustainable Metals and Alloys
Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 526
Unraveling CO adsorption on model single-atom catalysts
Hulva, J., Meier, M., Bliem, R., Jakub, Z., Kraushofer, F., Schmid, M., Diebold, U., Franchini, C., & Parkinson, G. S. (2021) · Science · doi:10.1126/science.abe5757 · Cited by 345
Self-citation
Metadata
- Authors
- Parkinson, G. S.
- Venue
- Surface Science Reports
- Publisher
- Elsevier BV
- Published
- 2016-03
- Volume
- 71
- Issue
- 1
- Pages
- 272-365
- ISSN
- 0167-5729 (ISSN-L)
- OpenAlex
- W2342621649
- Cited by
- 608
- References
- 268
- FWCI
- 13.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.