A modified kinetic analysis method of cellulose pyrolysis based on TG–FTIR technique
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The pyrolysis characteristics of cellulose was investigated using TGA and TG–FTIR. An modified reaction model was proposed to study cellulose pyrolysis. In this model, the active cellulose ( E = 137 k J / m o l ) and dehydrocellulose ( E = 91.3 k J / m o l ) were formed by parallel mechanism. The degradation of the active cellulose was followed by two competitive pathways, this is, one that formed levoglucosan ( E = 159.2 k J / m o l ) and another that formed furan and some low molecular weight products ( E = 203.5 k J / m o l ). The random scission model was used to describe the kinetics of cellulose pyrolysis. The same kinetic parameters were used for different linear heating rates (10–100 °C/min) and isothermal segment conditions. By successfully modeling non-isothermal and isothermal segment data, the model was proved to be credible in describing cellulose pyrolysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Kinetics and Mechanism of Cellulose Pyrolysis
Lin, Y.-C., Cho, J., Tompsett, G. A., Westmoreland, P. R., & Huber, G. W. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp906702p · Cited by 698
Samuelsson, L. N., Moriana, R., Babler, M. U., Ek, M., & Engvall, K. (2015) · Fuel · doi:10.1016/j.fuel.2014.11.079 · Cited by 41
Cited by
Chen, D., Cen, K., Zhuang, X., Gan, Z., Zhou, J., Zhang, Y., & Zhang, H. (2022) · Combustion and Flame · doi:10.1016/j.combustflame.2022.112142 · Cited by 902
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
A Review of Recent Advances in Biomass Pyrolysis
Wang, G., Dai, Y., Yang, H., Xiong, Q., Wang, K., Zhou, J., Li, Y., & Wang, S. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03107 · Cited by 597
Zong, P., Jiang, Y., Tian, Y., Li, J., Yuan, M., Ji, Y., Chen, M., Li, D., & Qiao, Y. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112777 · Cited by 412
Halder, P., Kundu, S., Patel, S., Parthasarathy, R., Pramanik, B., Paz-Ferreiro, J., & Shah, K. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112067 · Cited by 116
Metadata
- Authors
- Yang, X., Zhao, Y., Li, R., Wu, Y., & Yang, M.
- Venue
- Thermochimica Acta
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 665
- Pages
- 20-27
- ISSN
- 0040-6031 (ISSN-L)
- OpenAlex
- W2804107282
- Cited by
- 113
- References
- 3
- FWCI
- 3.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.