The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
Synergetic effects of surface texturing and solid lubricants to tailor friction and wear – A review
Open accessAbstract
Abstract Surface texturing and solid lubricants have demonstrated the ability to substantially reduce friction and wear under dry conditions. In recent decades, these two technologies have been combined to leverage the advantages of both for superior tribological performance. This review article first summarizes the state-of-the-art regarding surface texturing and solid lubricants, including soft metals, polytetrafluorethylene, diamond-like carbon and 2D layered materials. Then, the synergy between surface textures and solid lubricants is discussed, with particular emphasis on the underlying mechanisms. Finally, gaps in the existing understanding of these synergies are identified and opportunities for future research are suggested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional atomic crystals
Novoselov, K. S., Jiang, D., Schedin, F., Booth, T. J., Khotkevich, V. V., Morozov, S. V., & Geim, A. K. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502848102 · Cited by 11,788
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Robertson, J. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00005-0 · Cited by 6,206
The Friction and Lubrication of Solids
Bowden, F. P., Tabor, D., & Palmer, F. (1951) · American Journal of Physics · doi:10.1119/1.1933017 · Cited by 5,890
Gogotsi, Y., & Anasori, B. (2019) · ACS Nano · doi:10.1021/acsnano.9b06394 · Cited by 2,541
Frictional Characteristics of Atomically Thin Sheets
Lee, C., Li, Q., Kalb, W., Liu, X.-Z., Berger, H., Carpick, R. W., & Hone, J. (2010) · Science · doi:10.1126/science.1184167 · Cited by 1,811
Global energy consumption due to friction in passenger cars
Holmberg, K., Andersson, P., & Erdemir, A. (2012) · Tribology International · doi:10.1016/j.triboint.2011.11.022 · Cited by 1,614
Graphene: a new emerging lubricant
Berman, D., Erdemir, A., & Sumant, A. V. (2014) · Materials Today · doi:10.1016/j.mattod.2013.12.003 · Cited by 1,480
State of the Art in Laser Surface Texturing
Etsion, I. (2005) · Journal of Tribology · doi:10.1115/1.1828070 · Cited by 1,409
Bico, J., Thiele, U., & Quéré, D. (2002) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00061-4 · Cited by 1,390
Stolarski, T. A. (2003) · Tribology International · doi:10.1016/s0301-679x(02)00259-1 · Cited by 1,253
Ion-Beam Deposition of Thin Films of Diamondlike Carbon
Aisenberg, S., & Chabot, R. (1971) · Journal of Applied Physics · doi:10.1063/1.1660654 · Cited by 1,168
Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings
Gropper, D., Wang, L., & Harvey, T. J. (2015) · Tribology International · doi:10.1016/j.triboint.2015.10.009 · Cited by 905
Scharf, T. W., & Prasad, S. V. (2013) · Journal of Materials Science · doi:10.1007/s10853-012-7038-2 · Cited by 840
A critical assessment of surface texturing for friction and wear improvement
Gachot, C., Rosenkranz, A., Hsu, S. M., & Costa, H. L. (2016) · Wear · doi:10.1016/j.wear.2016.11.020 · Cited by 774
Self-citationAdvances in engineered surfaces for functional performance
Bruzzone, A. A. G., Costa, H. L., Lonardo, P. M., & Lucca, D. A. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.003 · Cited by 692
Self-citationHolmberg, K., & Erdemir, A. (2019) · Tribology International · doi:10.1016/j.triboint.2019.03.024 · Cited by 677
Solid Lubrication with MoS2: A Review
Vazirisereshk, M. R., Martini, A., Strubbe, D. A., & Baykara, M. Z. (2019) · Lubricants · doi:10.3390/lubricants7070057 · Cited by 605
Self-citationSuperlubricity of molybdenum disulphide
Martin, J. M., Donnet, C., Le Mogne, T., & Epicier, T. (1993) · Physical Review B · doi:10.1103/physrevb.48.10583 · Cited by 599
Historical developments and new trends in tribological and solid lubricant coatings
Donnet, C., & Erdemir, A. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2003.10.022 · Cited by 558
Influence of surface texture on boundary lubricated sliding contacts
Pettersson, U., & Jacobson, S. (2003) · Tribology International · doi:10.1016/s0301-679x(03)00104-x · Cited by 556
The friction and lubrication of solids
Kobe, K. A. (1951) · Journal of Chemical Education · doi:10.1021/ed028p230.3 · Cited by 460
Savage, R. H. (1948) · Journal of Applied Physics · doi:10.1063/1.1697867 · Cited by 447
Preparation, mechanical and anti-friction performance of MXene/polymer composites
Zhang, H., Wang, L., Chen, Q., Li, P., Zhou, A., Cao, X., & Hu, Q. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.084 · Cited by 410
Tribology of two-dimensional materials: From mechanisms to modulating strategies
Zhang, S., Ma, T., Erdemir, A., & Li, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.12.002 · Cited by 407
Solid Lubricant Coatings: Recent Developments and Future Trends
Donnet, C., & Erdemir, A. (2004) · Tribology Letters · doi:10.1023/b:tril.0000044487.32514.1d · Cited by 403
Nanocomposite and nanostructured tribological materials for space applications
VOEVODIN, A., & ZABINSKI, J. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.10.008 · Cited by 371
Nonlinear laser lithography for indefinitely large-area nanostructuring with femtosecond pulses
Öktem, B., Pavlov, I., Ilday, S., Kalaycıoğlu, H., Rybak, A., Yavaş, S., Erdoğan, M., & Ilday, F. Ö. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.272 · Cited by 368
Superlubricity between MoS2 Monolayers
Li, H., Wang, J., Gao, S., Chen, Q., Peng, L., Liu, K., & Wei, X. (2017) · Advanced Materials · doi:10.1002/adma.201701474 · Cited by 334
Friction Anisotropy–Driven Domain Imaging on Exfoliated Monolayer Graphene
Choi, J. S., Kim, J.-S., Byun, I.-S., Lee, D. H., Lee, M. J., Park, B. H., Lee, C., Yoon, D., Cheong, H., Lee, K. H., et al. (2011) · Science · doi:10.1126/science.1207110 · Cited by 328
PTFE Tribology and the Role of Mechanochemistry in the Development of Protective Surface Films
Harris, K. L., Pitenis, A. A., Sawyer, W. G., Krick, B. A., Blackman, G. S., Kasprzak, D. J., & Junk, C. P. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00452 · Cited by 326
Borghi, A., Gualtieri, E., Marchetto, D., Moretti, L., & Valeri, S. (2008) · Wear · doi:10.1016/j.wear.2008.02.011 · Cited by 300
Hard coatings with high temperature adaptive lubrication and contact thermal management: review
Voevodin, A. A., Muratore, C., & Aouadi, S. M. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.04.046 · Cited by 281
Polymeric Nanocomposites for Tribological Applications
Burris, D. L., Boesl, B., Bourne, G. R., & Sawyer, W. G. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600416 · Cited by 269
Entrainment and Inlet Suction: Two Mechanisms of Hydrodynamic Lubrication in Textured Bearings
Fowell, M. T., Olver, A. V., Gosman, A. D., Spikes, H. A., & Pegg, I. G. (2006) · Journal of Tribology · doi:10.1115/1.2540089 · Cited by 232
State-of-the-art of polymer tribology
Zhang, S. W. (1998) · Tribology International · doi:10.1016/s0301-679x(98)00007-3 · Cited by 225
Multi-Scale Surface Texturing in Tribology—Current Knowledge and Future Perspectives
Grützmacher, P. G., Profito, F. J., & Rosenkranz, A. (2019) · Lubricants · doi:10.3390/lubricants7110095 · Cited by 223
Self-citationLubricious oxide coatings for extreme temperature applications: A review
Aouadi, S. M., Gao, H., Martini, A., Scharf, T. W., & Muratore, C. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.05.064 · Cited by 215
Self-citationFriction and wear of MoS2 films on laser textured steel surfaces
Rapoport, L. S., Moshkovich, A., Perfilyev, V., Lapsker, I., Halperin, G., Itovich, Y., & Etsion, I. (2007) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2007.12.009 · Cited by 205
Rosenkranz, A., Grützmacher, P. G., Espinoza, R., Fuenzalida, V. M., Blanco, E., Escalona, N., Gracia, F. J., Villarroel, R., Guo, L., Kang, R., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.07.171 · Cited by 200
Self-citationEmerging superlubricity: A review of the state of the art and perspectives on future research
Baykara, M. Z., Vazirisereshk, M. R., & Martini, A. (2018) · Applied Physics Reviews · doi:10.1063/1.5051445 · Cited by 195
Self-citationThe effects of surface texture in reciprocating contacts – An experimental study
Vladescu, S.-C., Olver, A. V., Pegg, I. G., & Reddyhoff, T. (2015) · Tribology International · doi:10.1016/j.triboint.2014.09.015 · Cited by 185
Wang, Q., Xue, Q., Liu, W., & Chen, J. (2000) · Wear · doi:10.1016/s0043-1648(00)00432-4 · Cited by 168
Ultra-Wear-Resistant MXene-Based Composite Coating via in Situ Formed Nanostructured Tribofilm
Yin, X., Jin, J., Chen, X., Rosenkranz, A., & Luo, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11449 · Cited by 153
Self-citation2D nano-materials beyond graphene: from synthesis to tribological studies
Rosenkranz, A., Liu, Y., Yang, L., & Chen, L. (2020) · Applied Nanoscience · doi:10.1007/s13204-020-01466-z · Cited by 144
Self-citationSliding Properties of MoS 2 Layers: Load and Interlayer Orientation Effects
Levita, G., Cavaleiro, A., Molinari, E., Polcar, T., & Righi, M. C. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4098099 · Cited by 143
Marian, M., Song, G., Wang, B., Fuenzalida, V. M., Krauß, S., Merle, B., Tremmel, S., Wartzack, S. J., Yu, J., & Rosenkranz, A. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147311 · Cited by 143
Self-citationTribological Sensitivity of PTFE/Alumina Nanocomposites to a Range of Traditional Surface Finishes
Burris, D. L., & Sawyer, W. G. (2005) · Tribology Transactions · doi:10.1080/05698190590923842 · Cited by 141
Oviedo, J. P., Santosh, K. C., Lü, N., Wang, J., Cho, K., Wallace, R. M., & Kim, M. J. (2014) · ACS Nano · doi:10.1021/nn506052d · Cited by 135
Tribology review of blended bulk polymers and their coatings for high-load bearing applications
Nunez, E. E., Gheisari, R., & Polycarpou, A. A. (2018) · Tribology International · doi:10.1016/j.triboint.2018.08.002 · Cited by 135
Gachot, C., Rosenkranz, A., Reinert, L., Ramos‐Moore, E., Souza, N., Müser, M. H., & Mücklich, F. (2012) · Tribology Letters · doi:10.1007/s11249-012-0057-y · Cited by 131
Self-citationSpontaneous Blinking from a Tribological Viewpoint
Pult, H., Tosatti, S. G. P., Spencer, N. D., Asfour, J.-M., Ebenhoch, M., & Murphy, P. J. (2015) · The Ocular Surface · doi:10.1016/j.jtos.2014.12.004 · Cited by 127
Adaptive NbN/Ag coatings for high temperature tribological applications
Stone, D. S., Migas, J. A., Martini, A., Smith, T., Muratore, C., Voevodin, A. A., & Aouadi, S. M. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.04.054 · Cited by 121
Self-citationSurface texturing for adaptive solid lubrication
Basnyat, P., Luster, B., Muratore, C., Voevodin, A. A., Haasch, R. T., Zakeri, R., Kohli, P., & Aouadi, S. M. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2008.07.033 · Cited by 113
Nano friction and adhesion properties on Ti3C2 and Nb2C MXene studied by AFM
Zhou, X., Guo, Y., Wang, D., & Xu, Q. (2020) · Tribology International · doi:10.1016/j.triboint.2020.106646 · Cited by 107
Investigation into three-dimensional laser processing of tribological coatings
Voevodin, A. A., BULTMAN, J. B., & Zabinski, J. S. (1998) · Surface and Coatings Technology · doi:10.1016/s0257-8972(98)00543-x · Cited by 85
Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime
Mourier, L., Mazuyer, D., Ninove, F.-P., & Lubrecht, A. A. (2010) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet771 · Cited by 79
Marian, M., Grützmacher, P., Rosenkranz, A., Tremmel, S., Mücklich, F., & Wartzack, S. (2019) · Tribology International · doi:10.1016/j.triboint.2019.03.052 · Cited by 78
Self-citationMultifunctionality of single-walled carbon nanotube–polytetrafluoroethylene nanocomposites
Vail, J. R., Burris, D. L., & Sawyer, W. G. (2009) · Wear · doi:10.1016/j.wear.2008.12.117 · Cited by 76
Nanoscale Friction Behavior of Transition-Metal Dichalcogenides: Role of the Chalcogenide
Vazirisereshk, M. R., Hasz, K., Zhao, M., Johnson, A. T. C., Carpick, R. W., & Martini, A. (2020) · ACS Nano · doi:10.1021/acsnano.0c07558 · Cited by 74
Self-citationOral tribology: update on the relevance to study astringency in wines
Laguna, L., & Sarkar, A. (2017) · Tribology - Materials Surfaces & Interfaces · doi:10.1080/17515831.2017.1347736 · Cited by 72
Friction Anisotropy of MoS2: Effect of Tip–Sample Contact Quality
Vazirisereshk, M. R., Hasz, K., Carpick, R. W., & Martini, A. (2020) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.0c01617 · Cited by 71
Self-citationThickness dependent friction on few-layer MoS 2 , WS 2 , and WSe 2
Fang, L., Liu, D., Guo, Y., Liao, Z., Luo, J., & Wen, S. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa712b · Cited by 70
Tribology and Industry: From the Origins to 4.0
Ciulli, E. (2019) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2019.00055 · Cited by 65
Tribological Classification of Contact Lenses: From Coefficient of Friction to Sliding Work
Sterner, O., Aeschlimann, R., Zürcher, S., Scales, C., Riederer, D. E., Spencer, N. D., & Tosatti, S. G. P. (2016) · Tribology Letters · doi:10.1007/s11249-016-0696-5 · Cited by 50
Speed dependence of friction on single-layer and bulk MoS2 measured by atomic force microscopy
Acikgoz, O., & Baykara, M. Z. (2020) · Applied Physics Letters · doi:10.1063/1.5142712 · Cited by 48
Self-citationWang, Y., Wang, L., Wang, S., Wood, R. J. K., & Xue, Q. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.10.001 · Cited by 47
Action of a femtosecond laser generated micro-cavity passing through a circular EHL contact
Mourier, L., Mazuyer, D., Lubrecht, A. A., Donnet, C., & Audouard, E. (2007) · Wear · doi:10.1016/j.wear.2006.08.037 · Cited by 41
Marian, M., Weikert, T., & Tremmel, S. (2019) · Coatings · doi:10.3390/coatings9120843 · Cited by 41
Ni‐Doped MoS2 Dry Film Lubricant Life
Vellore, A., Garcia, S. R., Walters, N., Johnson, D. A., Kennett, A., Heverly, M., & Martini, A. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202001109 · Cited by 41
Self-citationEnhanced Growth of ZDDP-Based Tribofilms on Laser-Interference Patterned Cylinder Roller Bearings
Hsu, C., Stratmann, A., Rosenkranz, A., & Gachot, C. (2017) · Lubricants · doi:10.3390/lubricants5040039 · Cited by 39
Self-citationFactors influencing microinjection molding replication quality
Vera, J., Brulez, A., Degrandi‐Contraires, E., Larochette, M., Trannoy, N., Pignon, M., Mauclair, C., Valette, S., & Benayoun, S. (2017) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aa9a4e · Cited by 32
Fan, H., Su, Y., Song, J., Wan, H., Hu, L., & Zhang, Y. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.02.253 · Cited by 28
Ren, S., Huang, J., Cui, M., Pu, J., & Wang, L. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.12.159 · Cited by 27
Pimenov, S. M., Zavedeev, E. V., Arutyunyan, N. R., Зилова, О. С., Shupegin, M. L., Jaeggi, B., & Neuenschwander, B. (2017) · Journal of Applied Physics · doi:10.1063/1.4998586 · Cited by 27
Mechanistic studies of high temperature friction reduction in silver tantalate
Gao, H., Stone, D. S., Mohseni, H., Aouadi, S. M., Scharf, T. W., & Martini, A. (2013) · Applied Physics Letters · doi:10.1063/1.4798555 · Cited by 25
Self-citationOn the Performance of EHL Contacts with Textured Surfaces
Taee, M., Torabi, A., Akbarzadeh, S., Khonsari, M. M., & Badrossamay, M. (2017) · Tribology Letters · doi:10.1007/s11249-017-0871-3 · Cited by 25
Nanotribological behavior of bioinspired textured surfaces with directional characteristics
Grewal, H. S., Pendyala, P., Shin, H., Cho, I., & Yoon, E.-S. (2017) · Wear · doi:10.1016/j.wear.2017.01.033 · Cited by 22
A DLC-Punch Array to Fabricate the Micro-Textured Aluminum Sheet for Boiling Heat Transfer Control
Aizawa, T., Wasa, K., & Tamagaki, H. (2018) · Micromachines · doi:10.3390/mi9040147 · Cited by 19
Cited by
Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications
Zhai, W., Bai, L., Zhou, R., Fan, X., Kang, G., Liu, Y., & Zhou, K. (2021) · Advanced Science · doi:10.1002/advs.202003739 · Cited by 651
Nasrin, K., Sudharshan, V., Subramani, K., & Sathish, M. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202110267 · Cited by 439
Perspectives of 2D MXene Tribology
Rosenkranz, A., Righi, M. C., Sumant, A. V., Anasori, B., & Mochalin, V. N. (2023) · Advanced Materials · doi:10.1002/adma.202207757 · Cited by 331
Self-citation
Metadata
- Authors
- Rosenkranz, A., Costa, H. L., Baykara, M. Z., & Martini, A.
- Venue
- Tribology International
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 155
- Pages
- 106792
- ISSN
- 0301-679X (ISSN-L)
- OpenAlex
- W3109691481
- Cited by
- 505
- References
- 79
- FWCI
- 32.81
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.