Waste heat recovery technologies and applications
Open accessThe DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Abstract
Industrial waste heat is the energy that is generated in industrial processes which is not put into any practical use and is lost, wasted and dumped into the environment. Recovering the waste heat can be conducted through various waste heat recovery technologies to provide valuable energy sources and reduce the overall energy consumption. In this paper, a comprehensive review is made of waste heat recovery methodologies and state of the art technologies used for industrial processes. By considering the heat recovery opportunities for energy optimisation in the steel and iron, food, and ceramic industries, a revision of the current practices and procedures is assessed. The research is conducted on the operation and performance of the commonly used technologies such as recuperators, regenerators, including furnace regenerators and rotary regenerators or heat wheels, passive air preheaters, regenerative and recuperative burners, plate heat exchangers and economisers and units such as waste heat boilers and run around coil (RAC). Techniques are considered such as direct contact condensation recovery, indirect contact condensation recovery, transport membrane condensation and the use of units such as heat pumps, heat recovery steam generators (HRSGs), heat pipe systems, Organic Rankine cycles, including the Kalina cycle, that recover and exchange waste heat with potential energy content. Furthermore, the uses of new emerging technologies for direct heat to power conversion such as thermoelectric, piezoelectric, thermionic, and thermo photo voltaic (TPV) power generation techniques are also explored and reviewed. In this regard, the functionality of all technologies and usage of each technique with respect to their advantages and disadvantages is evaluated and described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2007) · doi:10.1002/9780470172605 · Cited by 2,813
95/03996 Heat pipe science and technology
(1995) · Fuel and Energy Abstracts · doi:10.1016/0140-6701(95)95610-h · Cited by 1,495
Techno-economic survey of Organic Rankine Cycle (ORC) systems
Quoilin, S., Broek, M. V. D., Declaye, S., Dewallef, P., & Lemort, V. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.01.028 · Cited by 1,490
Heat Exchanger Design Handbook
Thulukkanam, K. (2000) · CRC Press eBooks · doi:10.1201/9781420026870 · Cited by 1,069
Working fluids for low-temperature organic Rankine cycles
SALEH, B., KOGLBAUER, G., WENDLAND, M., & FISCHER, J. (2007) · Energy · doi:10.1016/j.energy.2006.07.001 · Cited by 1,045
Working fluids for high-temperature organic Rankine cycles
Lai, N. A., Wendland, M., & Fischer, J. (2011) · Energy · doi:10.1016/j.energy.2010.10.051 · Cited by 1,032
Advances in heat pump systems: a review
Chua, K. J., Chou, S. K., & Yang, W. M. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.06.014 · Cited by 966
Heat pipe based systems - Advances and applications
Jouhara, H., Chauhan, A., Nannou, T., Almahmoud, S., Delpech, B., & Wrobel, L. C. (2017) · Energy · doi:10.1016/j.energy.2017.04.028 · Cited by 661
Self-citationBrückner, S., Liu, S., Miró, L., Radspieler, M., Cabeza, L. F., & Lävemann, E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.147 · Cited by 597
Heat Exchanger Design Handbook
Thulukkanam, K. (2013) · doi:10.1201/b14877 · Cited by 597
Tracking Industrial Energy Efficiency and CO2 Emissions
International Energy Agency (2007) · OECD eBooks · doi:10.1787/9789264030404-en · Cited by 553
Waste Heat Recovery. Technology and Opportunities in U.S. Industry
Johnson, I., Choate, W., & Davidson, A. (2008) · doi:10.2172/1218716 · Cited by 445
LeBlanc, S. (2014) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2014.11.002 · Cited by 424
HEAT PIPES: REVIEW, OPPORTUNITIES AND CHALLENGES
Faghri, A. (2014) · Frontiers in Heat Pipes · doi:10.5098/fhp.5.1 · Cited by 382
Quader, M. A., Ahmed, S., Ghazilla, R. A. R., Ahmed, S., & Dahari, M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.05.026 · Cited by 337
Energy recovery from high temperature slags
Barati, M., Esfahani, S., & Utigard, T. A. (2011) · Energy · doi:10.1016/j.energy.2011.07.007 · Cited by 312
Renewable Energy: technology, economics and environment
Singh, R. K. (2008) · Journal of Resources Energy and Development · doi:10.3233/red-120050 · Cited by 257
Encyclopedia of Agriculture and Food Systems
(2014) · Elsevier eBooks · doi:10.1016/c2009-0-03584-3 · Cited by 241
Heating and Cooling of Buildings: Design for Efficiency
Kreider, J. F., Rabl, A., & Curtiss, P. S. (1994) · Virtual Defense Library (Ministerio de Defensa) · Cited by 198
Nemati, A., Nami, H., Ranjbar, F., & Yari, M. (2016) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2016.11.003 · Cited by 197
Review on Thermionic Energy Converters
Abdul Khalid, K. A., Leong, T. J., & Mohamed, K. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2556751 · Cited by 184
Encyclopedia of Agriculture and Food Systems
(2015) · Choice Reviews Online · doi:10.5860/choice.188216 · Cited by 181
Heating and cooling of buildings: design for efficiency
(1994) · Choice Reviews Online · doi:10.5860/choice.32-1554 · Cited by 174
Feasibility Study for Recovering Waste Heat in the Steelmaking Industry Using a Chemical Recuperator
Maruoka, N., Mizuochi, T., Purwanto, H., & Akiyama, T. (2004) · ISIJ International · doi:10.2355/isijinternational.44.257 · Cited by 162
Spatial modelling of industrial heat loads and recovery potentials in the UK
McKenna, R., & Norman, J. (2010) · Energy Policy · doi:10.1016/j.enpol.2010.05.042 · Cited by 142
Environmentally-friendly food processing
Mattsson, B., & Sonesson, U. (2003) · Woodhead Publishing Limited eBooks · doi:10.1533/9781855737174 · Cited by 110
Energy harvesting from a standing wave thermoacoustic-piezoelectric resonator
Smoker, J., Nouh, M. A., Aldraihem, O. J., & Baz, A. M. S. (2012) · Journal of Applied Physics · doi:10.1063/1.4712630 · Cited by 107
Heat Recovery from High Temperature Slags: A Review of Chemical Methods
Sun, Y., Zhang, Z., Liu, L., & Wang, X. (2015) · Energies · doi:10.3390/en8031917 · Cited by 105
Energy Efficiency and Management in Food Processing Facilities
Wang, L. (2008) · CRC Press eBooks · doi:10.1201/9781420063394 · Cited by 102
Gambier, P., Anton, S. R., Kong, N., Ertürk, A., & Inman, D. J. (2011) · Measurement Science and Technology · doi:10.1088/0957-0233/23/1/015101 · Cited by 76
A Complete Course in Canning and Related Processes
(2016) · Elsevier eBooks · doi:10.1016/c2013-0-16340-4 · Cited by 57
Waste Treatment in the Metal Manufacturing, Forming, Coating, and Finishing Industries
Wang, L. K., Shammas, N. K., & Hung, Y. (2010) · CRC Press eBooks · doi:10.1201/9781420072242 · Cited by 32
Srihari, N., & Das, S. K. (2007) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2006.12.011 · Cited by 29
WASTE HEAT RECOVERY IN HEAT PUMP SYSTEMS: SOLUTION TO REDUCE GLOBAL WARMING
Baradey, Y., Hawlader, M. N. A., Ismail, A. F., et al. (2015) · IIUM Engineering Journal · doi:10.31436/iiumej.v16i2.602 · Cited by 14
Converter Gas and Waste Water Treatment by OG-system in Steel Smelting Industry
Lin, T. (2013) · Theseus (Ammattikorkeakoulujen) · Cited by 2
Cited by
Environmental aspects of fuel cells: A review
Abdelkareem, M. A., Elsaid, K., Wilberforce, T., Kamil, M., Sayed, E. T., & Olabi, A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141803 · Cited by 655
Energy Applications of Magnetocaloric Materials
Kitanovski, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903741 · Cited by 540
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Brough, D., & Jouhara, H. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2019.100007 · Cited by 413
Self-citationA Recent Comprehensive Review of Fuel Cells: History, Types, and Applications
Qasem, N. A. A., & Abdulrahman, G. A. Q. (2024) · International Journal of Energy Research · doi:10.1155/2024/7271748 · Cited by 402
Metadata
- Authors
- Jouhara, H., Khordehgah, N., Almahmoud, S., Delpech, B., Chauhan, A., & Tassou, S. A.
- Venue
- Thermal Science and Engineering Progress
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 6
- Pages
- 268-289
- ISSN
- 2451-9049 (ISSN-L)
- OpenAlex
- W2801934545
- Cited by
- 1,210
- References
- 35
- FWCI
- 52.60
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.