Active source localization in wave guides based on machine learning
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In the present work, an active source localization strategy is proposed. The presence of active sources in a waveguide can have several reasons, such as crack initiation or internal friction. In this study, the active source is represented by an impact event. A steel ball is dropped on an aluminum plate at different positions. Elastic waves are excited and will propagate through the plate. The wave response is acquired by a piezoelectric sensor network, which is attached to the plate. After performing numerical and physical experiments, enough data are collected in order to train an artificial neural network and a support vector machine. Those machine learning algorithms will predict the impact position based on the wave response of each sensor, while only numerical data from the finite element simulations are used to train both methods. After the training process is completed, the algorithms are applied to experimental data. A good agreement between reference and predicted results proves that the wave responses at the piezoelectric transducers contain sufficient information in order to localize the impact position precisely.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Learning representations by back-propagating errors
Rumelhart, D. E., Hinton, G. E., & Williams, R. J. (1986) · Nature · doi:10.1038/323533a0 · Cited by 31,892
Emerging Artificial Intelligence Methods in Structural Engineering
Salehi, H., & Burgueño, R. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.084 · Cited by 1,068
Cited by
Yang, Z., Yang, H., Tian, T., Deng, D., Hu, M., Ma, J., Gao, D., Zhang, J., Ma, S., Yang, L., et al. (2023) · Ultrasonics · doi:10.1016/j.ultras.2023.107014 · Cited by 302
Ju, M., Dou, Z., Li, J.-W., Qiu, X., Shen, B., Zhang, D., Yao, F.-Z., Gong, W., & Wang, K. (2023) · Sensors · doi:10.3390/s23010543 · Cited by 277
“A lot of algo- rithms, such as iterative optimization, combinatorial optimization, genetic algorithms (GA), and artificial neural network (ANN) techniques, have been developed to optimize Compared with the local electromechanical impedance-based SHM, the guided wave monitoring technology can both realize local damage…”
MethodInfluentialCapineri, L., & Bulletti, A. (2021) · doi:10.20944/preprints202103.0347.v2 · Cited by 131
“Hesser et al. [159] investigated the autonomous detection of defects in plate-like metal panels with an ANN that was trained by signals acquired by four commercial sensors (PIC255 from PI Ceramic) with 1 MHz sampling rate and 16 bit resolution ADC.”
MethodMariani, S., Rendu, Q., Urbani, M., & Sbarufatti, C. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107748 · Cited by 86
Hesser, D. F., Mostafavi, S., Kocur, G. K., & Markert, B. (2021) · Neurocomputing · doi:10.1016/j.neucom.2021.04.108 · Cited by 82
Self-citation
Metadata
- Authors
- Hesser, D. F., Kocur, G. K., & Markert, B.
- Venue
- Ultrasonics
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 106
- Pages
- 106144
- ISSN
- 0041-624X (ISSN-L)
- OpenAlex
- W3016887452
- Cited by
- 37
- References
- 2
- FWCI
- 3.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Active source localization in wave guides based on machine learning. https://app.cochat.ai/papers/10.1016/j.ultras.2020.106144
- The paper
- Hesser, D. F., Kocur, G. K., & Markert, B. (2020). Active source localization in wave guides based on machine learning. Ultrasonics. https://doi.org/10.1016/j.ultras.2020.106144
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.