The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control
Abstract
Ultrasonic testing (UT) techniques are highly capable of detecting defects in engineering components. The present manuscript intends to review the ultrasonic testing techniques applied to additive manufacturing products; either in-situ or offline. While the in-situ applications of ultrasonic testing to additive manufacturing are more favorable, literature holds a few research works on this topic. On the other hand, most of the works reported on ultrasonic testing of additive manufacturing products deal with offline applications. In many of these works, samples with artificial defects are prepared and tested through ultrasonic testing techniques including laser ultrasonics, phased arrays, guided waves and immersion ultrasonic testing. These UT methods and their applications in damage detection of additive manufacturing products are discussed in detail. Moreover, the codes and standards which are currently being developed for ultrasonic testing of additive manufacturing products are introduced. The choice of UT methods in detecting defects and material characterization in additive manufacturing is found to be highly dependent on the manufacturing process and capabilities of UT techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Ultrasonic Guided Waves in Solid Media
Rose, J. L. (2014) · Cambridge University Press eBooks · doi:10.1017/cbo9781107273610 · Cited by 1,496
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Ultrasonic arrays for non-destructive evaluation: A review
Drinkwater, B. W., & Wilcox, P. D. (2006) · NDT & E International · doi:10.1016/j.ndteint.2006.03.006 · Cited by 1,147
Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C. (2018) · Materials · doi:10.3390/ma11050840 · Cited by 713
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Piezoelectric and Acoustic Materials for Transducer Applications
(2008) · Springer eBooks · doi:10.1007/978-0-387-76540-2 · Cited by 566
Cited by
Hassani, S., & Dackermann, U. (2023) · Sensors · doi:10.3390/s23042204 · Cited by 492
Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., & Ayoub, G. Y. (2023) · Polymers · doi:10.3390/polym15193881 · Cited by 141
Structural Health Monitoring Damage Detection Systems for Aerospace
(2021) · Springer Aerospace Technology · doi:10.1007/978-3-030-72192-3 · Cited by 92
Indu Kumar, K. K., Patel, M. B., Boese, S., Gouldstone, A., Champagne, V. K., & Özdemir, O. Ç. (2024) · Journal of Thermal Spray Technology · doi:10.1007/s11666-024-01738-y · Cited by 10
Metadata
- Authors
- Honarvar, F., & Varvani-Farahani, A.
- Venue
- Ultrasonics
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 108
- Pages
- 106227
- ISSN
- 0041-624X (ISSN-L)
- OpenAlex
- W3042433789
- Cited by
- 489
- References
- 38
- FWCI
- 22.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control. https://app.cochat.ai/papers/10.1016/j.ultras.2020.106227
- The paper
- Honarvar, F., & Varvani-Farahani, A. (2020). A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control. Ultrasonics. https://doi.org/10.1016/j.ultras.2020.106227
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
