The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Ultrasonically assisted hydrothermal synthesis of activated carbon–HKUST-1-MOF hybrid for efficient simultaneous ultrasound-assisted removal of ternary organic dyes and antibacterial investigation: Taguchi optimization
Open accessAbstract
Activated carbon (AC) composite with HKUST-1 metal organic framework (AC-HKUST-1 MOF) was prepared by ultrasonically assisted hydrothermal method and characterized by FTIR, SEM and XRD analysis and laterally was applied for the simultaneous ultrasound-assisted removal of crystal violet (CV), disulfine blue (DSB) and quinoline yellow (QY) dyes in their ternary solution. In addition, this material, was screened in vitro for their antibacterial actively against Methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa (PAO1) bacteria. In dyes removal process, the effects of important variables such as initial concentration of dyes, adsorbent mass, pH and sonication time on adsorption process optimized by Taguchi approach. Optimum values of 4, 0.02 g, 4 min, 10 mg L(-1) were obtained for pH, AC-HKUST-1 MOF mass, sonication time and the concentration of each dye, respectively. At the optimized condition, the removal percentages of CV, DSB and QY were found to be 99.76%, 91.10%, and 90.75%, respectively, with desirability of 0.989. Kinetics of adsorption processes follow pseudo-second-order model. The Langmuir model as best method with high applicability for representation of experimental data, while maximum mono layer adsorption capacity for CV, DSB and QY on AC-HKUST-1 estimated to be 133.33, 129.87 and 65.37 mg g(-1) which significantly were higher than HKUST-1 as sole material with Qm to equate 59.45, 57.14 and 38.80 mg g(-1), respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Metal–Organic Frameworks
Zhou, H.-C., Long, J. R., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr300014x · Cited by 7,720
Stock, N., & Biswas, S. (2012) · Chemical Reviews · doi:10.1021/cr200304e · Cited by 5,045
Metal–Organic Frameworks (MOFs)
Zhou, H.-C. “., & Kitagawa, S. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs90059f · Cited by 4,125
Asfaram, A., Ghaedi, M., Agarwal, S., Tyagi, I., & Kumar Gupta, V. (2015) · RSC Advances · doi:10.1039/c4ra15637d · Cited by 726
Self-citationSarı, A., & Tuzen, M. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.01.008 · Cited by 498
Sarı, A., & Tuzen, M. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.09.002 · Cited by 433
Brown, A. N., Smith, K., Samuels, T. A., Lu, J., Obare, S. O., & Scott, M. E. (2012) · Applied and Environmental Microbiology · doi:10.1128/aem.06513-11 · Cited by 420
Ghaedi, M., Ansari, A., Habibi, M. H., & Asghari, A. R. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.04.031 · Cited by 399
Self-citationAl-Janabi, N., Hill, P., Torrente-Murciano, L., Garforth, A., Gorgojo, P., Siperstein, F., & Fan, X. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.07.020 · Cited by 386
Anayurt, R. A., Sari, A., & Tuzen, M. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.03.002 · Cited by 378
Sari, A., Mendil, D., Tuzen, M., & Soylak, M. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.12.020 · Cited by 305
Sarı, A., & Tuzen, M. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.03.005 · Cited by 288 · cited 1×
“The color remaining even development of adsorption system based on conventional adsorbent encourage researchers to search and design novel adsorbent to simultaneously improve figures of merit correspond to adsorption system in short time by using small amount of adsorbents [5-9].”
BackgroundZhao, Z., Wang, S., Yang, Y., Li, X., Li, J., & Li, Z. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.012 · Cited by 278
Biosorption of Pb(II) and Cr(III) from aqueous solution by lichen (Parmelina tiliaceae) biomass
Uluozlu, O. D., Sari, A., Tuzen, M., & Soylak, M. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.06.052 · Cited by 278
Kim, H. K., Yun, W. S., Kim, M.-B., Kim, J. Y., Bae, Y.-S., Lee, J., & Jeong, N. C. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06637 · Cited by 265
Ghaedi, M., Heidarpour, S., Nasiri Kokhdan, S., Sahraie, R., Daneshfar, A., & Brazesh, B. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.04.030 · Cited by 242
Self-citationTowards industrial use of metal-organic framework: Impact of shaping on the MOF properties
Bazer-Bachi, D., Assié, L., Lecocq, V., Harbuzaru, B., & Falk, V. (2014) · Powder Technology · doi:10.1016/j.powtec.2013.09.013 · Cited by 229
Huang, L., He, M., Chen, B., & Hu, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01484k · Cited by 212
Abbasi, A. R., Akhbari, K., & Morsali, A. (2012) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2011.11.016 · Cited by 211
Jamshidi, M., Ghaedi, M., Dashtian, K., Ghaedi, A. M., Hajati, S., Goudarzi, A., & Alipanahpour, E. (2016) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2015.08.024 · Cited by 189
Self-citationGhaedi, M., Biyareh, M. N., Kokhdan, S. N., Shamsaldini, S., Sahraei, R., Daneshfar, A., & Shahriyar, S. (2012) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.01.015 · Cited by 183
Self-citationThe controlled regulation of morphology and size of HKUST-1 by “coordination modulation method”
Wang, F., Guo, H., Chai, Y., Li, Y., & Liu, C. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.02.023 · Cited by 180
A Zn azelate MOF: combining antibacterial effect
Tamames-Tabar, C., Imbuluzqueta, E., Guillou, N., Serre, C., Miller, S. R., Elkaïm, E., Horcajada, P., & Blanco-Prieto, M. J. (2015) · CrystEngComm · doi:10.1039/c4ce00885e · Cited by 180
Rodríguez, H. S., Hinestroza, J. P., Ochoa‐Puentes, C., Sierra, C. A., & Soto, C. Y. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40815 · Cited by 179
Ribas, M. C., Adebayo, M. A., Prola, L. D. T., Lima, E. C., Cataluña, R., Feris, L. A., Puchana-Rosero, M. J., Machado, F. M., Pavan, F. A., & Calvete, T. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.054 · Cited by 179
Rocío-Bautista, P., Martínez-Benito, C., Pino, V., Pasán, J., Ayala, J. H., Ruiz-Pérez, C., & Afonso, A. M. (2015) · Talanta · doi:10.1016/j.talanta.2015.02.032 · Cited by 173
Kora, A. J., & Arunachalam, J. (2010) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-010-0569-2 · Cited by 169
Qian, D., Cheng, L., Hao, G., Li, W., & Lu, A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301772k · Cited by 153
Zhu, Q., Chen, Y., Wang, W., Zhang, H., Ren, C., Chen, H., & Chen, X. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.01.012 · Cited by 149
H2S interaction with HKUST-1 and ZIF-8 MOFs: A multitechnique study
Ethiraj, J., Bonino, F., Lamberti, C., & Bordiga, S. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.12.034 · Cited by 121
Bis-(3′-5′)-Cyclic Dimeric GMP Regulates Antimicrobial Peptide Resistance in Pseudomonas aeruginosa
Chua, S. L., Tan, S. Y.-Y., Rybtke, M. T., Chen, Y., Rice, S. A., Kjelleberg, S. J., Tolker‐Nielsen, T., Yang, L., & Givskov, M. (2013) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.02499-12 · Cited by 116
Azad, F. N., Ghaedi, M., Dashtian, K., Montazerozohori, M., Hajati, S., & Dil, E. A. (2015) · RSC Advances · doi:10.1039/c5ra08746e · Cited by 100
Self-citationJamshidi, M., Ghaedi, M., Dashtian, K., & Hajati, S. (2015) · RSC Advances · doi:10.1039/c5ra17873h · Cited by 96
Self-citationZhou, H., Zhang, J., Zhang, J., Yan, X., Shen, X., & Yuan, A. (2015) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2015.02.001 · Cited by 79
Dil, E. A., Ghaedi, M., Asfaram, A., & Goudarzi, A. (2015) · New Journal of Chemistry · doi:10.1039/c5nj02217g · Cited by 74
Self-citationXiong, Y., Ye, F., Zhang, C., Shen, S., Su, L., & Zhao, S. (2014) · RSC Advances · doi:10.1039/c4ra12468e · Cited by 70
Harding, J. L., Metz, J. M., & Reynolds, M. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201402529 · Cited by 67
Lee, D.-S., Eom, S., Kim, Y., et al. (2014) · Canadian Journal of Microbiology · doi:10.1139/cjm-2014-0286 · Cited by 56
Cited by
From fundamentals to applications: a toolbox for robust and multifunctional MOF materials
Kirchon, A., Feng, L., Drake, H. F., Joseph, E. A., & Zhou, H.-C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00688a · Cited by 1,448
Metal–Organic-Framework-Based Materials for Antimicrobial Applications
Li, R., Chen, T., & Pan, X. (2021) · ACS Nano · doi:10.1021/acsnano.0c09617 · Cited by 555
Pillai, A. M., Sivasankarapillai, V. S., Rahdar, A., Joseph, J., Sadeghfar, F., Anuf A, R., Rajesh, K., & Kyzas, G. Z. (2020) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2020.128107 · Cited by 496
Metal Organic Frameworks (MOFs) and ultrasound: A review
Vaitsis, C., Sourkouni, G., & Argirusis, C. (2019) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2018.11.004 · Cited by 410
Oveisi, M., Asli, M. A., & Mahmoodi, N. M. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.12.057 · Cited by 406
Metadata
- Authors
- Azad, F. N., Ghaedi, M., Dashtian, K., Hajati, S., & Pezeshkpour, V.
- Venue
- Ultrasonics Sonochemistry
- Publisher
- Elsevier BV
- Published
- 2016-07
- Volume
- 31
- Pages
- 383-393
- ISSN
- 1350-4177 (ISSN-L)
- OpenAlex
- W2286049980
- Cited by
- 319
- References
- 38
- FWCI
- 29.69
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.