One stage olive mill waste streams valorisation via hydrothermal carbonisation
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
An olive waste stream mixture, coming from a three phase-continuous centrifugation olive oil mill industry, with a typical wet basis mass composition of olive pulp 39 wt%, kernels 5 wt% and olive mill waste water 56 wt%, was subjected to hydrothermal carbonisation (HTC) at 180, 220 and 250 °C for a 3-hour residence time in a 2-litre stainless steel electrically heated batch reactor. The raw feedstock and corresponding hydrochars were characterised in terms of proximate and ultimate analyses, higher heating values and energy properties. Results showed an increase in carbonisation of samples with increasing HTC severity and an energy densification ratio up to 142% (at 250 °C). Hydrochar obtained at 250 °C was successfully pelletised using a lab scale pelletiser without binders or expensive drying procedures. Energy characterisation (HHV, TGA), ATR-FTIR analysis, fouling index evaluation and pelletisation results suggested that olive mill waste hydrochars could be used as energy dense and mechanical stable bio-fuels. Characterisation of HTC residues in terms of mineral content via induced coupled plasma optical emission spectroscopy (ICP-OES) as well as Total and Dissolved Organic Carbon enabled to evaluate their potential use as soil improvers. Nutrients and polyphenolic compounds in HTC liquid fractions were evaluated for the estimation of their potential use as liquid fertilisers. Results showed that HTC could represent a viable route for the valorisation of olive mill industry waste streams.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu, Z., Quek, A., Kent Hoekman, S., & Balasubramanian, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.069 · Cited by 808
Hydrothermal carbonization: Fate of inorganics
Reza, M. T., Lynam, J. G., Uddin, M. H., & Coronella, C. J. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.004 · Cited by 492
Hydrothermal carbonization of lignocellulosic biomass
Xiao, L.-P., Shi, Z.-J., Xu, F., & Sun, R.-C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.060 · Cited by 478
Boiler deposits from firing biomass fuels
Miles, T. R., Miles, T. R., Baxter, L. L., Bryers, R. W., Jenkins, B. M., & Oden, L. L. (1996) · Biomass and Bioenergy · doi:10.1016/0961-9534(95)00067-4 · Cited by 420
Danso-Boateng, E., Shama, G., Wheatley, A. D., Martin, S. J., & Holdich, R. G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.11.096 · Cited by 353
Lucian, M., & Fiori, L. (2017) · Energies · doi:10.3390/en10020211 · Cited by 316
Self-citationVolpe, M., & Fiori, L. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.02.022 · Cited by 237
Self-citationMäkelä, M., Benavente, V., & Fullana, A. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.06.022 · Cited by 225
Bargmann, I., Rillig, M. C., Kruse, A., Greef, J., & Kücke, M. (2014) · Journal of Plant Nutrition and Soil Science · doi:10.1002/jpln.201300069 · Cited by 172
Self-citationBenavente, V., Fullana, A., & Berge, N. D. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.013 · Cited by 117
Stemann, J., Erlach, B., & Ziegler, F. (2013) · Waste and Biomass Valorization · doi:10.1007/s12649-012-9190-y · Cited by 90
Cited by
A comprehensive review on hydrothermal carbonization of biomass and its applications
Sharma, R., Jasrotia, K., Singh, N., Ghosh, P., srivastava, S., Sharma, N. R., Singh, J., Kanwar, R., & Kumar, A. (2020) · Chemistry Africa · doi:10.1007/s42250-019-00098-3 · Cited by 252
Hydrochars production, characterization and application for wastewater treatment: A review
Azzaz, A. A., Khiari, B., Jellali, S., Ghimbeu, C. M., & Jeguirim, M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109882 · Cited by 236
“This is mainly attributed to the reduction of volatile matter content and the increase in fixed carbon percentage [35].”
BackgroundReactivity of cellulose during hydrothermal carbonization of lignocellulosic biomass
Volpe, M., Messineo, A., Mäkelä, M., Barr, M. R., Volpe, R., Corrado, C., & Fiori, L. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2020.106456 · Cited by 145
Self-citationOlive mill wastes: from wastes to resources
Enaime, G., Dababat, S., Wichern, M., & Lübken, M. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-32468-x · Cited by 129
Lucian, M., Volpe, M., Merzari, F., Wüst, D., Kruse, A., Andreottola, G., & Fiori, L. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123734 · Cited by 121
Self-citation
Metadata
- Authors
- Volpe, M., Wüst, D., Merzari, F., Lucian, M., Andreottola, G., Kruse, A., & Fiori, L.
- Venue
- Waste Management
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 80
- Pages
- 224-234
- ISSN
- 0956-053X (ISSN-L)
- OpenAlex
- W2890331798
- Cited by
- 109
- References
- 11
- FWCI
- 5.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.