Hydrothermal Carbonization of Waste Biomass: Process Design, Modeling, Energy Efficiency and Cost Analysis
Open accessThe DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
In this paper, a hydrothermal carbonization (HTC) process is designed and modeled on the basis of experimental data previously obtained for two representative organic waste materials: off-specification compost and grape marc. The process accounts for all the steps and equipment necessary to convert raw moist biomass into dry and pelletized hydrochar. By means of mass and thermal balances and based on common equations specific to the various equipment, thermal energy and power consumption were calculated at variable process conditions: HTC reactor temperature T: 180, 220, 250 °C; reaction time θ: 1, 3, 8 h. When operating the HTC plant with grape marc (65% moisture content) at optimized process conditions (T = 220 °C; θ = 1 h; dry biomass to water ratio = 0.19), thermal energy and power consumption were equal to 1170 kWh and 160 kWh per ton of hydrochar produced, respectively. Correspondingly, plant efficiency was 78%. In addition, the techno-economical aspects of the HTC process were analyzed in detail, considering both investment and production costs. The production cost of pelletized hydrochar and its break-even point were determined to be 157 €/ton and 200 €/ton, respectively. Such values make the use of hydrochar as a CO2 neutral biofuel attractive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The model computes the plant efficiency (equal to 78%) and the minimum selling price of the pelletized hydrochar (equal to 157 €/ton) which makes the whole plant economically sustainable.”
From Hydrothermal Carbonization of Organic Waste and Biomass: A Review on Process, Reactor, and Plant Modeling (2021) · cites this paper as [114]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155 · cited 1×
“This temperature was selected as hemicellulose decomposes at T > 180 ◦C, while most of the lignin and cellulose hydrolyze and decomposes at T > 200 ◦C [39,40].”
BackgroundLibra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756 · cited 3×
“Hydrochar can be used as soil amendment to improve soil nutrient retention capacity by increasing the nutrient supply for plants and decreasing losses due to leaching [4].”
BackgroundMethodThermal decomposition of wood: Influence of wood components and cellulose crystallite size
Poletto, M., Zattera, A. J., Forte, M. M. C., & Santana, R. M. C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.11.122 · Cited by 614 · cited 1×
“This temperature was selected as hemicellulose decomposes at T > 180 ◦C, while most of the lignin and cellulose hydrolyze and decomposes at T > 200 ◦C [39,40].”
BackgroundHydrothermal conversion of biomass to fuels and energetic materials
Kruse, A., Funke, A., & Titirici, M.-M. (2013) · Current Opinion in Chemical Biology · doi:10.1016/j.cbpa.2013.05.004 · Cited by 511 · cited 1×
“Hydrochar can be used as fuel [7,8] in existing coal-handling infrastructure and it is therefore very attractive for co-firing [9].”
BackgroundHydrothermal carbonization of lignocellulosic biomass
Xiao, L.-P., Shi, Z.-J., Xu, F., & Sun, R.-C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.060 · Cited by 478 · cited 1×
“[22], who measured the composition of the liquid deriving from HTC of maize stalk and Tamarix ramosissima, ligno-cellulosic feedstocks such as OSC and GM.”
BackgroundAgro-industrial waste to solid biofuel through hydrothermal carbonization
Basso, D., Patuzzi, F., Castello, D., Baratieri, M., Rada, E. C., Weiss-Hortala, E., & Fiori, L. (2016) · Waste Management · doi:10.1016/j.wasman.2015.05.013 · Cited by 252 · cited 3×
“Hydrochar HHV was computed by referring to linear correlations between hydrochar yield and HHV extrapolated from the experimental data previously obtained by our research group [17,18].”
BackgroundMethodSelf-citationNanoporous carbons from hydrothermally treated biomass as anode materials for lithium ion batteries
Unur, E., Brutti, S., Panero, S., & Scrosati, B. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.02.032 · Cited by 226
Sustainable Carbon Materials from Hydrothermal Processes
Titirici, M. (2013) · Wiley eBooks · doi:10.1002/9781118622179 · Cited by 198
The hydrothermal carbonization (HTC) plant as a decentral biorefinery for wet biomass
Hitzl, M., Corma, A., Pomares, F., & Renz, M. (2015) · Catalysis Today · doi:10.1016/j.cattod.2014.09.024 · Cited by 166 · cited 1×
“Though some pilot-scale HTC plants have been constructed in recent years [14], to date the detailed structure of such plants and their efficiency are still unknown to the vast majority of those involved in the HTC research field.”
BackgroundBasso, D., Weiss-Hortala, E., Patuzzi, F., Castello, D., Baratieri, M., & Fiori, L. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.01.118 · Cited by 123 · cited 4×
“HTC lab tests performed on OSC [17] show that TOC values increase at increasing temperature: Figure 1d.”
BackgroundMethodSelf-citation
Research works printed but not linked: 7
- Stemann, J., and Ziegler, F. (2011). World Renewable Energy Congress, Linköping, Sweden, 8–13 May 2011, Linköping University Electronic Press.
- Lavelli, 2016, Recovery of Winemaking By-Products, Ital. J. Food Sci., 28, 542
- Seider, W.D., Seader, J.D., and Lewin, D.R. (2004). Product and Process Design Principles: Synthesis, Analysis and Design, John Wiley & Sons. [2nd ed.].
- McCabe, W.L., Smith, J.C., and Harriott, P. (2005). Unit Operations of Chemical Engineering, McGraw-Hill. [7th ed.].
- White, F. (2011). Fluid Mechanics, McGraw-Hill. [7th ed.].
- Perry, R.H., and Green, D.W. (2007). Perry’s Chemical Engineers’ Handbook, McGraw-Hill. [8th ed.].
- Coker, A.K. (2007). Ludwig’s Applied Process Design for Chemical and Petrochemicals Plants, Elsevier. [4th ed.].
Cited by
Hydrothermal carbonization for energy-efficient processing of sewage sludge: A review
Wang, L., Chang, Y., & Li, A. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.04.011 · Cited by 499
Lucian, M., Volpe, M., Gao, L., Piro, G., Goldfarb, J. L., & Fiori, L. (2018) · Fuel · doi:10.1016/j.fuel.2018.06.060 · Cited by 300
Self-citationMuhlack, R. A., Potumarthi, R., & Jeffery, D. W. (2018) · Waste Management · doi:10.1016/j.wasman.2017.11.011 · Cited by 288
“Techno-economic modelling of HTC of grape marc was undertaken by Lucian and Fiori (2017), taking into account both investment and production costs for a 20,000 ton/year facility with a raw tions (based on McKendry, 2002b). ugh waste valorisation: A review of grape marc utilisation for value-added…”
MethodChi, N. T. L., Anto, S., Ahamed, T. S., Kumar, S. S., Shanmugam, S., Samuel, M. S., Mathimani, T., Brindhadevi, K., & Pugazhendhi, A. (2021) · Fuel · doi:10.1016/j.fuel.2020.119411 · Cited by 291
Hydochar and biochar: Production, physicochemical properties and techno-economic analysis
Kumar, A., Saini, K., & Bhaskar, T. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123442 · Cited by 279
Metadata
- Authors
- Lucian, M., & Fiori, L.
- Affiliations
- University of Trento (IT)
- Corresponding author
- Fiori, Luca
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2017-02-13
- Volume
- 10
- Issue
- 2
- Pages
- 211
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2587946761
- Cited by
- 316
- References
- 28
- Citations by year
- 2026: 48 · 2025: 33 · 2024: 31 · 2023: 31 · 2022: 31 · 2021: 49 · 2020: 46 · 2019: 19 · 2018: 21 · 2017: 7
- FWCI
- 11.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- Iris (University of Trento) (submittedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Environmental Science › Waste Management and Disposal › Municipal Solid Waste Management
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Keywords
- hydrothermal carbonization, biomass waste, hydrochar, grape pomace, process design, energy efficiency, power consumption, techno-economic analysis, break-even point, reactor temperature, reaction time (chemistry)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrothermal Carbonization of Waste Biomass: Process Design, Modeling, Energy Efficiency and Cost Analysis. https://app.cochat.ai/papers/10.3390/en10020211
- The paper
- Lucian, M., & Fiori, L. (2017). Hydrothermal Carbonization of Waste Biomass: Process Design, Modeling, Energy Efficiency and Cost Analysis. Energies. https://doi.org/10.3390/en10020211
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.