The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
3D printed chitosan scaffolds: A new TiO2 support for the photocatalytic degradation of amoxicillin in water
Abstract
TiO2-supported chitosan scaffolds (TiO2/CS) are here proposed as promising material for wastewater treatment, in particular for the removal of pharmaceutical compounds. TiO2/CS are tested for the amoxicillin photodegradation under UV/Vis irradiation. Amoxicillin (AMX) is an antibiotic of the beta-lactam family. Due to the release of antibiotics in wastewater and their persistence in the environment, harmful effects can develop on the aquatic and terrestrial organisms. TiO2 chitosan scaffolds with photocatalytic activity for wastewater remediation have been prepared by 3D printing using commercial P25-TiO2. The formulation for the 3D printer was prepared by dispersion of chitosan and TiO2 in powder form at the concentration 6% w/v and 1% w/v, respectively. The TiO2 particles (crystalline anatase and rutile phases) embedded in the chitosan have a size of about 20 nm, like in the starting material, as verified by X-ray diffraction and Raman spectroscopy and are homogeneously distributed in the scaffold, also after repeated photocatalytic tests, as revealed by SEM-EDS. The mechanical properties of the 3D structures are suitable for the targeted application as they can be easily handled without breakage. The AMX photodegradation efficiency under light irradiation by TiO2/CS made with scaffolds of different thicknesses (3, 5, 15 layers), was assessed in water by means of UV-Vis absorption and HPLC/UV measurements, at two different AMX:TiO2 molar ratios: 1/100 and 1/10. The 3D printed TiO2/CS system, even after repeated cycles, shows a high photodegradation efficiency, compared to the direct AMX photolysis. A zero-order kinetics for TiO2 supported photodegradation was found, whereas a pseudo-first order was observed for water dispersed TiO2. Mass spectrometry analysis revealed the presence of AMX degradates such as penilloic and penicilloic acids and diketopiperazine. The proposed 3D printed chitosan scaffolds may be used as reusable substrate for the TiO2 photocatalytic degradation of antibiotic pollutants in wastewater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent developments in photocatalytic water treatment technology: A review
Chong, M. N., Jin, B., Chow, C. W. K., & Saint, C. (2010) · Water Research · doi:10.1016/j.watres.2010.02.039 · Cited by 5,386
Explaining the Enhanced Photocatalytic Activity of Degussa P25 Mixed-Phase TiO 2 Using EPR
Hurum, D. C., Agrios, A. G., Gray, K. A., Rajh, T., & Thurnauer, M. C. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp0273934 · Cited by 2,015
Cited by
Nasrollahzadeh, M., Sajjadi, M., Iravani, S., & Varma, R. S. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116986 · Cited by 718
Velempini, T., Prabakaran, E., & Pillay, K. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100380 · Cited by 356
Al-Gethami, W., Qamar, M. A., Shariq, M., Alaghaz, A.-N. M. A., Farhan, A., Areshi, A. A., & Alnasir, M. H. (2024) · RSC Advances · doi:10.1039/d3ra06501d · Cited by 273
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Metadata
- Authors
- Bergamonti, L., Bergonzi, C., Graiff, C., Lottici, P. P., Bettini, R., & Elviri, L.
- Venue
- Water Research
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 163
- Pages
- 114841
- ISSN
- 0043-1354 (ISSN-L)
- OpenAlex
- W2954061272
- Cited by
- 165
- References
- 2
- FWCI
- 3.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printed chitosan scaffolds: A new TiO2 support for the photocatalytic degradation of amoxicillin in water. https://app.cochat.ai/papers/10.1016/j.watres.2019.07.008
- The paper
- Bergamonti, L., Bergonzi, C., Graiff, C., Lottici, P. P., Bettini, R., & Elviri, L. (2019). 3D printed chitosan scaffolds: A new TiO2 support for the photocatalytic degradation of amoxicillin in water. Water Research. https://doi.org/10.1016/j.watres.2019.07.008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.