Evaluating biochar and its modifications for the removal of ammonium, nitrate, and phosphate in water

Abstract

Removal of nitrogen (N) and phosphorus (P) from water through the use of various sorbents is often considered an economically viable way for supplementing conventional methods. Biochar has been widely studied for its potential adsorption capabilities for soluble N and P, but the performance of different types of biochars can vary widely. In this review, we summarized the adsorption capacities of biochars in removing N (NH 4-N and NO 3-N) and P (PO 4-P) based on the reported data, and discussed the possible mechanisms and influencing factors. In general, the NH 4-N adsorption capacity of unmodified biochars is relatively low, at levels of less than 20 mg/g. This adsorption is mainly via ion exchange and/or interactions with oxygen-containing functional groups on biochar surfaces. The affinity is even lower for NO 3-N, because of electrostatic repulsion by negatively charged biochar surfaces. Precipitation of PO 4-P by metals/metal oxides in biochar is the primary mechanism for PO 4-P removal. Biochars modified by metals have a significantly higher capacity to remove NH 4-N, NO 3-N, and PO 4-P than unmodified biochar, due to the change in surface charge and the increase in metal oxides on the biochar surface. Ambient conditions in the aqueous phase, including temperature, pH, and co-existing ions, can significantly alter the adsorption of N and P by biochars, indicating the importance of optimal processing parameters for N and P removal. However, the release of endogenous N and P from biochar to water can impede its performance, and the presence of competing ions in water poses practical challenges for the use of biochar for nutrient removal. This review demonstrates that progress is needed to improve the performance of biochars and overcome challenges before the widespread field application of biochar for N and P removal is realized.