Bearing fault diagnosis of a permanent magnet synchronous motor via a fast and online order analysis method in an embedded system
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A permanent magnet synchronous motor (PMSM) is a typical electromechanical system widely used in industrial automation. Bearing fault diagnosis is necessary because a bearing is a key and vulnerable component in a PMSM. Order analysis (OA) methods, which include tachometer-based OA and tacholess OA methods, have been proven to be effective tools for diagnosing bearing fault under variable speed conditions. However, tachometer-based OA methods require the installation of an external sensor to obtain rotating speed, whereas tacholess OA methods are usually complicated and require massive computation cost. Traditional OA methods cannot diagnose bearing fault conveniently and timely because of such deficiencies. Thus, a novel fast and online OA (FOOA) method is proposed to realize variable-speed PMSM bearing fault diagnosis in this study. The FOOA method consists of two algorithms. (1) The rotating phase information is extracted from the sinusoidal current of the PMSM, and a series of equal-phase sampling pulses are generated. (2) The bearing signal acquired from a microphone is angular resampled based on the equal-phase sampling pulses. The resampled signal is demodulated, and the envelope order spectrum is calculated for bearing fault identification. The two algorithms are executed sequentially by two micro controller units operating in parallel. Thus, they can be implemented in an embedded system for online fault diagnosis. The effectiveness and flexibility of the proposed FOOA method are validated on both a desktop computer and an embedded system to diagnose different types of defective bearings that are installed on a PMSM test rig.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastic Bearing Fault Diagnosis Based on a Two-Step Data Mining Approach
He, D., Li, R., & Zhu, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2192894 · Cited by 143
Research works printed but not linked: 29
- Ebrahimi, 2014, Advanced eccentricity fault recognition in permanent magnet synchronous motors using stator current signature analysis, IEEE Trans. Ind. Electron., 61, 2041, 10.1109/TIE.2013.2263777 · DOI · Paper page
- Jin, 2014, Motor bearing fault diagnosis using trace ratio linear discriminant analysis, IEEE Trans. Ind. Electron., 61, 2441, 10.1109/TIE.2013.2273471 · DOI · Paper page
- Ebrahimi, 2009, Static-, dynamic-, and mixed-eccentricity fault diagnoses in permanent-magnet synchronous motors, IEEE Trans. Ind. Electron., 56, 4727, 10.1109/TIE.2009.2029577 · DOI · Paper page
- Ebrahimi, 2008, Static eccentricity fault diagnosis in permanent magnet synchronous motor using time stepping finite element method, IEEE Trans. Magn., 44, 4297, 10.1109/TMAG.2008.2001534 · DOI · Paper page
- Nandi, 2005, Condition monitoring and fault diagnosis of electrical motors – a review, IEEE Trans. Energy Convers., 20, 719, 10.1109/TEC.2005.847955 · DOI · Paper page
- Lee, 2014, Prognostics and health management design for rotary machinery systems – reviews, methodology and applications, Mech. Syst. Signal Process., 42, 314, 10.1016/j.ymssp.2013.06.004 · DOI · Paper page
- Yan, 2014, Wavelets for fault diagnosis of rotary machines: a review with applications, Signal Process., 96, 1, 10.1016/j.sigpro.2013.04.015 · DOI · Paper page
- Wang, 2011, Transient modeling and parameter identification based on wavelet and correlation filtering for rotating machine fault diagnosis, Mech. Syst. Signal Process., 25, 1299, 10.1016/j.ymssp.2010.10.013 · DOI
- Lei, 2013, A review on empirical mode decomposition in fault diagnosis of rotating machinery, Mech. Syst. Signal Process., 35, 108, 10.1016/j.ymssp.2012.09.015 · DOI · Paper page
- Lu, 2014, Sequential multiscale noise tuning stochastic resonance for train bearing fault diagnosis in an embedded system, IEEE Trans. Instrum. Meas., 63, 106, 10.1109/TIM.2013.2275241 · DOI
- Lu, 2014, Stochastic resonance with Woods-Saxon potential for rolling element bearing fault diagnosis, Mech. Syst. Signal Process., 45, 488, 10.1016/j.ymssp.2013.12.004 · DOI
- Lu, 2016, Online fault diagnosis of motor bearing via stochastic–resonance-based adaptive filter in an embedded system, IEEE Trans. Syst. Man Cy. Syst.
- Shen, 2013, A fast and adaptive varying-scale morphological analysis method for rolling element bearing fault diagnosis, J. Mech. Eng. Sci., 227, 1362, 10.1177/0954406212460628 · DOI
- Antoni, 2009, Cyclostationarity by examples, Mech. Syst. Signal Process., 23, 987, 10.1016/j.ymssp.2008.10.010 · DOI · Paper page
- He, 2012, Time-frequency manifold as a signature for machine health diagnosis, IEEE Trans. Instrum. Meas., 61, 1218, 10.1109/TIM.2012.2183402 · DOI
- Wang, 2015, Transient signal analysis based on Levenberg-Marquardt method for fault feature extraction of rotating machines, Mech. Syst. Signal Process., 54–55, 16, 10.1016/j.ymssp.2014.09.010 · DOI
- Wang, 2015, A general sequential Monte Carlo method based optimal wavelet filter: a Bayesian approach for extracting bearing fault features, Mech. Syst. Signal Process., 52–53, 293, 10.1016/j.ymssp.2014.07.005 · DOI
- Yang, 2006, Application of Dempster-Shafer theory in fault diagnosis of induction motors using vibration and current signals, Mech. Syst. Signal Process., 20, 403, 10.1016/j.ymssp.2004.10.010 · DOI · Paper page
- Li, 2013, Adaptive stochastic resonance method for impact signal detection based on sliding window, Mech. Syst. Signal Process., 36, 240, 10.1016/j.ymssp.2012.12.004 · DOI
- Li, 2015, Criterion fusion for spectral segmentation and its application to optimal demodulation of bearing vibration signals, Mech. Syst. Signal Process., 64–65, 132, 10.1016/j.ymssp.2015.04.004 · DOI
- Fyfe, 1997, Analysis of computed order tracking, Mech. Syst. Signal Process., 11, 187, 10.1006/mssp.1996.0056 · DOI
- Zhao, 2013, Tacholess envelope order analysis and its application to fault detection of rolling element bearings with varying speeds, Sensors, 13, 10856, 10.3390/s130810856 · DOI
- Mishra, 2016, Rolling element bearing defect diagnosis under variable speed operation through angle synchronous averaging of wavelet de-noised estimate, Mech. Syst. Signal Process., 72–73, 206, 10.1016/j.ymssp.2015.10.019 · DOI
- Wang, 2014, Rolling element bearing fault diagnosis via fault characteristic order (FCO) analysis, Mech. Syst. Signal Process., 45, 139, 10.1016/j.ymssp.2013.11.011 · DOI · Paper page
- Wang, 2015, Rotating speed isolation and its application to rolling element bearing fault diagnosis under large speed variation conditions, J. Sound Vib., 348, 381, 10.1016/j.jsv.2015.03.018 · DOI
- Li, 2016, Rolling element bearing defect detection using the generalized synchrosqueezing transform guided by time-frequency ridge enhancement, ISA Trans., 60, 274, 10.1016/j.isatra.2015.10.014 · DOI
- Lin, 2015, Dynamic signal analysis for speed-varying machinery: a review, Sci. Sin. Tech., 45, 669, 10.1360/N092014-00425 · DOI
- Lu, 2015, Enhanced rotating machine fault diagnosis based on time-delayed feedback stochastic resonance, ASME J. Vibr. Acoust., 137, 051008, 10.1115/1.4030346 · DOI
- Antoni, 2002, Differential diagnosis of gear and bearing faults, ASME J. Vibr. Acoust., 124, 165, 10.1115/1.1456906 · DOI · Paper page
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“In [117], [122], [129] the information about the rotation direction is obtained from the phase current waveform, in [118] from a magnetic sensor mounted on the motor housing, in [123] from a mechanical vibration signal, while in [130] from an acoustic signal.”
BackgroundMethodInfluentialEdge Computing on IoT for Machine Signal Processing and Fault Diagnosis: A Review
Lu, S., Lu, J., An, K., Wang, X., & He, Q. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3239944 · Cited by 295
Self-citationAn adaptive deep transfer learning method for bearing fault diagnosis
Wu, Z., Jiang, H., Zhao, K., & Li, X. (2020) · Measurement · doi:10.1016/j.measurement.2019.107227 · Cited by 291
Lu, S., Yan, R., Liu, Y., & Wang, Q. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2902806 · Cited by 271
Self-citationAn adaptive spatiotemporal feature learning approach for fault diagnosis in complex systems
Han, T., Liu, C., Wu, L., Sarkar, S., & Jiang, D. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.07.048 · Cited by 181
Metadata
- Authors
- Lu, S., He, Q., & Zhao, J.
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 113
- Pages
- 36-49
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W2595206487
- Cited by
- 95
- References
- 1
- FWCI
- 6.89
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- National Natural Science Foundation of China (51577001, 51605002)
- Natural Science Foundation of Anhui Province (1608085QE110)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.