The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Tacholess Speed Estimation in Order Tracking: A Review With Application to Rotating Machine Fault Diagnosis
Abstract
Order tracking (OT), which is realized by signal sampling in equal-angle increment according to the measured rotating speed, is a powerful technique for rotating machine fault diagnosis under variable-speed condition. However, if the tachometer cannot be installed on the rotating machine or the speed signal is not available for some reasons, OT is difficult to be realized. This review summarizes recent advances in the development of tacholess speed estimation methods for OT with its applications to fault diagnosis. First, the basis of rotating speed estimation and OT is revisited. Then, the methods are categorized into three groups including vibration or sound signal, electrical motor current signal, and video stream according to the signal source from which the speed is estimated. The principle, implementation procedures, key techniques, along with the merits, and shortcuts of these methods are summarized and discussed in detail. Afterward, a contrastive case study using three kinds of methods is provided to intuitively illustrate the performances of OT along with the applications in motor bearing fault diagnosis. A bibliography of the recent publications related to this topic is also provided to facilitate the selection and improvement of the tacholess OT methods in fault diagnosis applications. Finally, the research prospects are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Self-citationMachinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Sensorless Vector and Direct Torque Control
Vas, P. (1998) · doi:10.1093/oso/9780198564652.001.0001 · Cited by 2,571
A review on empirical mode decomposition in fault diagnosis of rotating machinery
Lei, Y., Lin, J., He, Z., & Zuo, M. J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.09.015 · Cited by 1,886
Deep learning for smart manufacturing: Methods and applications
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.003 · Cited by 1,740
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Self-citationAdaptive speed identification for vector control of induction motors without rotational transducers
Schauder, C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.158829 · Cited by 1,125
ANALYSIS OF COMPUTED ORDER TRACKING
Fyfe, K. R., & Munck, E. D. S. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1996.0056 · Cited by 598
A review on electrical motors energy use and energy savings
Saidur, R. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.018 · Cited by 499
Machine vision algorithms and applications
(2008) · Choice Reviews Online · doi:10.5860/choice.46-0907 · Cited by 464
Cited by
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
Self-citationAn Improved Quantum-Inspired Differential Evolution Algorithm for Deep Belief Network
Deng, W., Liu, H., Xu, J., Zhao, H., & Song, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2983233 · Cited by 429
Edge Computing on IoT for Machine Signal Processing and Fault Diagnosis: A Review
Lu, S., Lu, J., An, K., Wang, X., & He, Q. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3239944 · Cited by 295
Self-citationWang, X., Lu, S., Huang, W., Wang, Q., Zhang, S., & Xia, M. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3051668 · Cited by 65
Self-citation
Metadata
- Authors
- Lu, S., Yan, R., Liu, Y., & Wang, Q.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2019-07
- Volume
- 68
- Issue
- 7
- Pages
- 2315-2332
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2934649617
- Cited by
- 271
- References
- 66
- FWCI
- 11.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tacholess Speed Estimation in Order Tracking: A Review With Application to Rotating Machine Fault Diagnosis. https://app.cochat.ai/papers/10.1109/tim.2019.2902806
- The paper
- Lu, S., Yan, R., Liu, Y., & Wang, Q. (2019). Tacholess Speed Estimation in Order Tracking: A Review With Application to Rotating Machine Fault Diagnosis. IEEE Transactions on Instrumentation and Measurement. https://doi.org/10.1109/tim.2019.2902806
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.