The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
A parameter-adaptive VMD method based on grasshopper optimization algorithm to analyze vibration signals from rotating machinery
Abstract
The mode number and mode frequency bandwidth control parameter (or quadratic penalty term) have significant effects on the decomposition results of the variational mode decomposition (VMD) method. In the conventional VMD method, the values of decomposition parameters are given in advance, which makes it difficult to achieve satisfactory analysis results. To address this issue, this paper proposes a parameter-adaptive VMD method based on grasshopper optimization algorithm (GOA) to analyze vibration signals from rotating machinery. In this method, the optimal mode number and mode frequency bandwidth control parameter that match with the analyzed vibration signal can be estimated adaptively. Firstly, a measurement index termed weighted kurtosis index is constructed by using kurtosis index and correlation coefficient. Then, the VMD parameters are optimized by the GOA algorithm using the maximum weighted kurtosis index as optimization objective. Finally, fault features can be extracted by analyzing the sensitive mode with maximum weighted kurtosis index. Two case studies demonstrate that the proposed method is effective to analyze machinery vibration signal for fault diagnosis. Moreover, comparisons with the conventional fixed-parameter VMD method and the well-known fast kurtogram method highlight the advantages of the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new optimizer using particle swarm theory
Eberhart, R., & Kennedy, J. (2002) · MHS'95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science · doi:10.1109/mhs.1995.494215 · Cited by 16,067
Variational Mode Decomposition
Dragomiretskiy, K., & Zosso, D. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2288675 · Cited by 9,184
GSA: A Gravitational Search Algorithm
Rashedi, E., Nezamabadi-pour, H., & Saryazdi, S. (2009) · Information Sciences · doi:10.1016/j.ins.2009.03.004 · Cited by 7,358
A New Metaheuristic Bat-Inspired Algorithm
Yang, X.-S. (2010) · Studies in Computational Intelligence · doi:10.1007/978-3-642-12538-6_6 · Cited by 4,905
Firefly algorithm, stochastic test functions and design optimisation
Yang, X. S. (2010) · International Journal of Bio-Inspired Computation · doi:10.1504/ijbic.2010.032124 · Cited by 2,729
Grasshopper Optimisation Algorithm: Theory and application
Saremi, S., Mirjalili, S., & Lewis, A. (2017) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2017.01.004 · Cited by 2,727
13 Flower Pollination Algorithm for Global Optimization
Yang, X. (2012) · Middlesex University Research Repository (Middlesex University Of London) · Cited by 2,274
Flower Pollination Algorithm for Global Optimization
Yang, X.-S. (2012) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-32894-7_27 · Cited by 1,630
Fast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601
Feng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998
Application of the EEMD method to rotor fault diagnosis of rotating machinery
Lei, Y., He, Z., & Zi, Y. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.11.005 · Cited by 587
Wang, Y., Markert, R., Xiang, J., & Zheng, W. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.02.020 · Cited by 556
Application of an improved kurtogram method for fault diagnosis of rolling element bearings
Lei, Y., Lin, J., He, Z., & Zi, Y. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.12.011 · Cited by 490
Zhang, M., Jiang, Z., & Feng, K. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.02.013 · Cited by 414
An enhanced Kurtogram method for fault diagnosis of rolling element bearings
Wang, D., Tse, P. W., & Tsui, K. L. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.10.003 · Cited by 409
Li, Z., Chen, J., Zi, Y., & Pan, J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.08.042 · Cited by 345
Bearing fault diagnosis using multi-scale entropy and adaptive neuro-fuzzy inference
Zhang, L., Xiong, G., Liu, H., Zou, H., & Guo, W. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.02.118 · Cited by 340
Feng, Z., Liang, M., Yi, Z., & Hou, S. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.04.019 · Cited by 318
Tse, P. W., & Wang, D. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.05.024 · Cited by 243
Wang, Y., Xu, G., Liang, L., & Jiang, K. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.09.002 · Cited by 231
Chatter identification in end milling process using wavelet packets and Hilbert–Huang transform
Cao, H., Lei, Y., & He, Z. (2013) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2013.02.007 · Cited by 229
Liu, H., & Han, M. (2014) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2014.01.011 · Cited by 187
Li, Z., Jiang, Y. S., Guo, Q., Hu, C. K., & Peng, Z. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.12.013 · Cited by 162
SVD principle analysis and fault diagnosis for bearings based on the correlation coefficient
Qiao, Z., & Pan, Z. (2015) · Measurement Science and Technology · doi:10.1088/0957-0233/26/8/085014 · Cited by 153
Adaptive stochastic resonance method for impact signal detection based on sliding window
Li, J., Chen, X., & He, Z. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.12.004 · Cited by 121
Yang, W., Peng, Z., Wei, K., Shi, P. X., & Tian, W. (2016) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2016.0088 · Cited by 105
Wang, D., Miao, Q., Fan, X., & Huang, H. (2009) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-009-0807-4 · Cited by 98
Self-citationWang, D., & Miao, Q. (2015) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.01.052 · Cited by 48
Self-citationA Sparsity-Promoted Decomposition for Compressed Fault Diagnosis of Roller Bearings
Wang, H., Ke, Y., Song, L., Tang, G., & Chen, P. (2016) · Sensors · doi:10.3390/s16091524 · Cited by 26
Yang, Y., & Jiang, D. (2017) · Shock and Vibration · doi:10.1155/2017/5963239 · Cited by 16
Cited by
Grasshopper Optimization Algorithm: Theory, Variants, and Applications
Meraihi, Y., Gabis, A. B., Mirjalili, S., & Ramdane-Cherif, A. (2021) · IEEE Access · doi:10.1109/access.2021.3067597 · Cited by 320
Miao, Y., Zhao, M., & Lin, J. (2019) · ISA Transactions · doi:10.1016/j.isatra.2018.10.008 · Cited by 263
Abualigah, L., & Diabat, A. (2020) · Neural Computing and Applications · doi:10.1007/s00521-020-04789-8 · Cited by 255
Metadata
- Authors
- Zhang, X., Miao, Q., Zhang, H., & Wang, L.
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 108
- Pages
- 58-72
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W2791125525
- Cited by
- 554
- References
- 30
- FWCI
- 29.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.