The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
A multi-stage semi-supervised learning approach for intelligent fault diagnosis of rolling bearing using data augmentation and metric learning
Abstract
Abstract Limited condition monitoring data are recorded with label information in practice, which make the fault identification task more challenging. A semi-supervised learning (SSL) approach can be employed to increase the identification performance of the classifiers under such situation. In this study, a three-stage SSL approach using data augmentation (DA) and metric learning is proposed for an intelligent bearing fault diagnosis under limited labeled data. In the first stage, a DA method comprising seven DA strategies is presented to expand the feature space for the limited labeled samples under each healthy conditions. An optimization objective combining a cross entropy loss and a triplet loss is adopted to enlarge the margin between the feature distributions of limited labeled samples under different healthy conditions. In the second stage, a K-means technique is employed to acquire the cluster centers for the limited labeled samples under different healthy conditions. In the third stage, the label information for the unlabeled samples is first estimated according to the membership between the feature distributions of the unlabeled samples and the various cluster centers for original labeled samples and then a Kullback-Leibler divergence loss is introduced to minimize the discrepancy between feature distributions for the unlabeled samples and its corresponding cluster centers. The effectiveness of the proposed method is evaluated on two case studies, one is on an experimental bearing fault dataset from our laboratory test-rig, and the other is on a publicly dataset from a bearing degradation test. The comparison results on these two case studies demonstrate that the proposed method can perform better in bearing fault diagnosis under limited labeled samples than existing diagnostic methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adam: A Method for Stochastic Optimization
Kingma, D. P., & Ba, J. (2014) · arXiv · doi:10.48550/arxiv.1412.6980 · Cited by 98,946
(2014) · Cited by 33,419
Learning representations by back-propagating errors
Rumelhart, D. E., Hinton, G. E., & Williams, R. J. (1986) · Nature · doi:10.1038/323533a0 · Cited by 31,892
Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift
Ioffe, S., & Szegedy, C. (2015) · arXiv · doi:10.48550/arxiv.1502.03167 · Cited by 27,818
FaceNet: A unified embedding for face recognition and clustering
Schroff, F., Kalenichenko, D., & Philbin, J. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298682 · Cited by 15,267
Data clustering: 50 years beyond K-means
Jain, A. K. (2010) · Pattern Recognition Letters · doi:10.1016/j.patrec.2009.09.011 · Cited by 9,368
Beyond Accuracy, F-Score and ROC: A Family of Discriminant Measures for Performance Evaluation
Sokolova, M., Japkowicz, N., & Szpakowicz, S. (2006) · Lecture Notes in Computer Science · doi:10.1007/11941439_114 · Cited by 1,974
A Hybrid Prognostics Approach for Estimating Remaining Useful Life of Rolling Element Bearings
Wang, B., Lei, Y., Li, N., & Li, N. (2020) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2882682 · Cited by 1,917
Rényi Divergence and Kullback-Leibler Divergence
van Erven, T., & Harremoes, P. (2014) · IEEE Transactions on Information Theory · doi:10.1109/tit.2014.2320500 · Cited by 1,555
Unsupervised Data Augmentation for Consistency Training
Xie, Q., Dai, Z., Hovy, E., Luong, M.-T., & Le, Q. V. (2019) · arXiv · doi:10.48550/arxiv.1904.12848 · Cited by 1,517
Improving deep neural networks for LVCSR using rectified linear units and dropout
Dahl, G. E., Sainath, T. N., & Hinton, G. E. (2013) · 2013 IEEE International Conference on Acoustics, Speech and Signal Processing · doi:10.1109/icassp.2013.6639346 · Cited by 1,310
Yang, B., Lei, Y., Jia, F., & Xing, S. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.12.051 · Cited by 879
Jing, L., Zhao, M., Li, P., & Xu, X. (2017) · Measurement · doi:10.1016/j.measurement.2017.07.017 · Cited by 698
Yu, G., Yu, M., & Xu, C. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2696503 · Cited by 682
MixMatch: A Holistic Approach to Semi-Supervised Learning
Berthelot, D., Carlini, N., Goodfellow, I., Papernot, N., Oliver, A., & Raffel, C. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1905.02249 · Cited by 562
Generative adversarial networks for data augmentation in machine fault diagnosis
Shao, S., Wang, P., & Yan, R. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.01.001 · Cited by 556
Wavelet transform based on inner product in fault diagnosis of rotating machinery: A review
Chen, J., Li, Z., Pan, J., Chen, G., Zi, Y., Yuan, J., Chen, B., & He, Z. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.08.023 · Cited by 517
Wang, Y., Xiang, J., Markert, R., & Liang, M. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.039 · Cited by 504
Multisynchrosqueezing Transform
Yu, G., Wang, Z., & Zhao, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868296 · Cited by 501
Bin, G. F., Gao, J. J., Li, X. J., & Dhillon, B. S. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.08.002 · Cited by 499
Self-citationDeep separable convolutional network for remaining useful life prediction of machinery
Wang, B., Lei, Y., Li, N., & Yan, T. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106330 · Cited by 412
Intelligent rotating machinery fault diagnosis based on deep learning using data augmentation
Li, X., Zhang, W., Ding, Q., & Sun, J.-Q. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1456-1 · Cited by 404
Self-citationCross-Domain Fault Diagnosis of Rolling Element Bearings Using Deep Generative Neural Networks
Li, X., Zhang, W., & Ding, Q. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868023 · Cited by 396
Self-citationResearch on data augmentation for image classification based on convolution neural networks
Shijie, J., Ping, W., Peiyi, J., & Siping, H. (2017) · 2017 Chinese Automation Congress (CAC) · doi:10.1109/cac.2017.8243510 · Cited by 320
Diagnosing Rotating Machines With Weakly Supervised Data Using Deep Transfer Learning
Li, X., Zhang, W., Ding, Q., & Li, X. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2927590 · Cited by 298
Self-citationMiao, H., Li, B., Sun, C., & Liu, J. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2900295 · Cited by 293
Li, X., Zhang, W., & Ding, Q. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.05.021 · Cited by 271
Self-citationWang, S., Xiang, J., Zhong, Y., & Zhou, Y. (2018) · Knowledge-Based Systems · doi:10.1016/j.knosys.2017.12.027 · Cited by 269
Yan, X., & Jia, M. (2019) · Knowledge-Based Systems · doi:10.1016/j.knosys.2018.09.004 · Cited by 262
Chen, K., Huangfu, Y., Ma, H., Xu, Z., Li, X., & Wen, B. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.05.014 · Cited by 262
Self-citationAdaptive data augmentation for image classification
Fawzi, A., Samulowitz, H., Turaga, D., & Frossard, P. (2016) · 2016 IEEE International Conference on Image Processing (ICIP) · doi:10.1109/icip.2016.7533048 · Cited by 239
He, Z., Shao, H., Wang, P., Lin, J. (., Cheng, J., & Yang, Y. (2020) · Knowledge-Based Systems · doi:10.1016/j.knosys.2019.105313 · Cited by 235
Liu, R., Yang, B., & Hauptmann, A. G. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2915536 · Cited by 204
Li, X., Jiang, H., Niu, M., & Wang, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106752 · Cited by 203
Self-citationYu, K., Lin, T. R., Ma, H., Li, H., & Zeng, J. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2913058 · Cited by 160
Self-citationRazavi‐Far, R., Hallaji, E., Farajzadeh-Zanjani, M., Saif, M., Kia, S. H., Henao, H., & Capolino, G. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2873546 · Cited by 143
Semi-supervised fault classification based on dynamic Sparse Stacked auto-encoders model
Jiang, L., Ge, Z., & Song, Z. (2017) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2017.06.010 · Cited by 132
Li, X., Li, J., Zhao, C., Qu, Y., & He, D. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106740 · Cited by 122
Self-citationYi, Q., Mao, Y., Tang, B., Wang, Y., & Chen, H. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106298 · Cited by 100
Zhao, X., & Jia, M. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.07.038 · Cited by 97
A novel unsupervised deep learning network for intelligent fault diagnosis of rotating machinery
Zhao, X., & Jia, M. (2020) · Structural Health Monitoring · doi:10.1177/1475921719897317 · Cited by 95
Zhang, K., Tang, B., Yi, Q., & Deng, L. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.05.049 · Cited by 94
Qian, W., Li, S., & Wang, J. (2018) · IEEE Access · doi:10.1109/access.2018.2880770 · Cited by 91
Triplet Loss Guided Adversarial Domain Adaptation for Bearing Fault Diagnosis
Wang, X., & Liu, F. (2020) · Sensors · doi:10.3390/s20010320 · Cited by 90
Yu, K., Lin, T. R., & Tan, J. (2019) · Structural Health Monitoring · doi:10.1177/1475921719841690 · Cited by 74
Self-citationMeng, Z., Guo, X., Pan, Z., Sun, D., & Liu, S. (2019) · IEEE Access · doi:10.1109/access.2019.2923417 · Cited by 71
Hu, T., Tang, T., & Chen, M. (2019) · IEEE Access · doi:10.1109/access.2019.2937838 · Cited by 36
One-dimensional fully decoupled networks for fault diagnosis of planetary gearboxes
Chang, X., Tang, B., Tan, Q., Deng, L., & Zhang, F. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106482 · Cited by 35
Cited by
Li, T., Zhou, Z., Li, S., Sun, C., Yan, R., & Chen, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108653 · Cited by 673
Zhang, T., Chen, J., Li, F., Zhang, K., Lv, H., He, S., & Xu, E. (2022) · ISA Transactions · doi:10.1016/j.isatra.2021.02.042 · Cited by 571
Federated learning for machinery fault diagnosis with dynamic validation and self-supervision
Zhang, W., Li, X., Ma, H., Luo, Z., & Li, X. (2021) · Knowledge-Based Systems · doi:10.1016/j.knosys.2020.106679 · Cited by 301
Self-citationDing, Y., Zhuang, J., Ding, P., & Jia, M. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.108126 · Cited by 253
Performance Enhancement of P300 Detection by Multiscale-CNN
Wang, H., Pei, Z., Xu, L., Xu, T., Bezerianos, A., Sun, Y., & Li, J. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3067943 · Cited by 35
“D signals [46], [47].”
Metadata
- Authors
- Yu, K., Lin, T. R., Ma, H., Li, X., & Li, X.
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 146
- Pages
- 107043
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W3037611653
- Cited by
- 302
- References
- 48
- FWCI
- 21.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.