The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Simultaneous Bearing Fault Recognition and Remaining Useful Life Prediction Using Joint-Loss Convolutional Neural Network
Abstract
Fault diagnosis and remaining useful life (RUL) prediction are always two major issues in modern industrial systems, which are usually regarded as two separated tasks to make the problem easier but ignore the fact that there are certain information of these two tasks that can be shared to improve the performance. Therefore, to capture common features between different relative problems, a joint-loss convolutional neural network (JL-CNN) architecture is proposed in this paper, which can implement bearing fault recognition and RUL prediction in parallel by sharing the parameters and partial networks, meanwhile keeping the output layers of different tasks. The JL-CNN is constructed based on a CNN, which is a widely used deep learning method because of its powerful feature extraction ability. During optimization phase, a JL function is designed to enable the proposed approach to learn the diagnosis-prognosis features and improve generalization while reducing the overfitting risk and computation cost. Moreover, because the information behind the signals of different problems has been shared and exploited deeper, the generalization and the accuracy of results can also be improved. Finally, the effectiveness of the JL-CNN method is validated by run-to-failure dataset. Compared with support vector regression and traditional CNN, the mean-square-error of the proposed method decreases 82.7% and 24.9%, respectively. Therefore, results and comparisons show that the proposed method can be applied for the intercrossed applications between fault diagnosis and RUL prediction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Caruana, R. (1997) · Machine Learning · doi:10.1023/a:1007379606734 · Cited by 6,636
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
Self-citationWei, J., Dong, G., & Chen, Z. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782224 · Cited by 643 · cited 1×
“Machine learning techniques have been widely used in data-driven methods, such as support vector regression (SVR) [33], [34], ANN [35],”
MethodZhao, M., Kang, M., Tang, B., & Pecht, M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2762639 · Cited by 380
Liu, R., Meng, G., Yang, B., Sun, C., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2645238 · Cited by 345
Self-citationEbrahimkhanlou, A., & Salamone, S. (2018) · Health Monitoring of Structural and Biological Systems XII · doi:10.1117/12.2296613 · Cited by 42
Cited by
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Liu, Z., & Zhang, L. (2020) · Measurement · doi:10.1016/j.measurement.2019.107002 · Cited by 535
Yu, K., Lin, T. R., Ma, H., Li, X., & Li, X. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107043 · Cited by 302
Gated Dual Attention Unit Neural Networks for Remaining Useful Life Prediction of Rolling Bearings
Qin, Y., Chen, D., Xiang, S., & Zhu, C. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2999442 · Cited by 271
Chen, J., Huang, R., Chen, Z., Mao, W., & Li, W. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110239 · Cited by 267
Metadata
- Authors
- Liu, R., Yang, B., & Hauptmann, A. G.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2020-01
- Volume
- 16
- Issue
- 1
- Pages
- 87-96
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2943909972
- Cited by
- 204
- References
- 6
- FWCI
- 12.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Simultaneous Bearing Fault Recognition and Remaining Useful Life Prediction Using Joint-Loss Convolutional Neural Network. https://app.cochat.ai/papers/10.1109/tii.2019.2915536
- The paper
- Liu, R., Yang, B., & Hauptmann, A. G. (2020). Simultaneous Bearing Fault Recognition and Remaining Useful Life Prediction Using Joint-Loss Convolutional Neural Network. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/tii.2019.2915536
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.