The DOI matches its Crossref record.
Aluminum foam stabilization by solid particles
Abstract
A room temperature water model and a high temperature molten aluminum system were designed and constructed to investigate the effect of solid particles on the stabilization of foams. The average foam life was used to evaluate the stability of the foam. The effects of particle size, wetability, and concentration of the SiO2 particles were investigated at various gas flow rates in the room temperature system. The results indicated that only SiO2 particles with suitable wetability can stabilize liquid foam. The foam stability increases with decreasing particle size and increasing particle concentration. The effects of melt temperature and SiC particle concentration on aluminum foam stabilization were investigated in the high temperature system. It was found that a critical concentration of SiC particles was necessary for foaming to occur. The foam height increased with increasing concentration of SiC particles. The stability of the foam decreases with increasing temperature. © 1999 Canadian Institute of Mining and Metallurgy. Published by Elsevier Science Ltd. All rights reserved. Résumé On a çoncu et construit un modéle aqueux à la température de la pièce ainsi qu'un système d'aluminium fondu à haute température afin d'étudier l'effet de particules solides sur la stabilisation d'ecumes. On a utilisé la vie moyenne de l'écume pour evaluer sa stabilité. On a étudié l'effet de la taille de particule, de la mouillabilité et de la concentration de particules de SiO2, à divers taux d'écoulement de gaz, sur le système à la temperature de la piece. Les resultats indiquent que seules les particules de Si02 ayant une mouillabilitie adequate peuvent stabiliser l'ecume liquide. La stabilité de l'écume augmente avec une diminution de la taille de particule et avec l'augmentation de leur concentration. On a étudié l'effet de la températuré de fonte et de la concentration de particules de SiC sur la stabilisation d'écume d'aluminium du système à haute temperature. On a trouvé qu'une concentration critique de particules de SiC était nécessaire pour que l'ecumage se produise. La hauteur de l'écume augmentait avec une augmentation de la concentration de particules de SiC. La stabilite de l'ecume diminue avec une augmentation de la température. © 1999 Canadian Institute of Mining and Metallurgy. Published by Elsevier Science Ltd. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The role of particles in stabilising foams and emulsions
Hunter, T. N., Pugh, R. J., Franks, G. V., & Jameson, G. J. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2007.07.007 · Cited by 1,063
Foam Superstabilization by Polymer Microrods
Alargova, R. G., Warhadpande, D. S., Paunov, V. N., & Velev, O. D. (2004) · Langmuir · doi:10.1021/la048647a · Cited by 406
Kaptay, G. (2006) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.12.021 · Cited by 386
Manufacturing routes for metallic foams
Banhart, J. (2000) · JOM · doi:10.1007/s11837-000-0062-8 · Cited by 332
Metal Foams: Production and Stability
Banhart, J. (2006) · Advanced Engineering Materials · doi:10.1002/adem.200600071 · Cited by 297
Metadata
- Authors
- Ip, S.
- Venue
- Canadian Metallurgical Quarterly
- Publisher
- Informa UK Limited
- Published
- 1999-01-01
- Volume
- 38
- Issue
- 1
- Pages
- 81-92
- ISSN
- 0008-4433 (ISSN-L)
- OpenAlex
- W1997064679
- Cited by
- 185
- References
- 0
- FWCI
- 9.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Aluminum foam stabilization by solid particles. https://app.cochat.ai/papers/10.1016/s0008-4433(98)00024-x
- The paper
- Ip, S. (1999). Aluminum foam stabilization by solid particles. Canadian Metallurgical Quarterly. https://doi.org/10.1016/s0008-4433(98)00024-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.