The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A mineralogical and geochemical study of element mobility in sulfide mine tailings of Fe oxide Cu–Au deposits from the Punta del Cobre belt, northern Chile
Open accessAbstract
Two flotation tailings sites (Ojancos and P. Cerda) from the Fe oxide Cu–Au Punta del Cobre belt, south of Copiapo, Atacama desert, northern Chile, are geochemically (largely using sequential extractions) and mineralogically compared. Main ore minerals are pyrite, magnetite and/or hematite and chalcopyrite. Gangue is dominantly calcite with minor quartz. The host silicate assemblage is largely controlled by hydrothermal alteration and consists of variable amounts of the following minerals: K-feldspar±Ca-amphibole±biotite±sericite±chlorite±tourmaline±epidote±quartz. In this study, both the Ojancos and the P. Cerda tailings were deposited in valley dam impoundments and when they were filled, new tailings were deposited upstream. As a result, high quantities of seepage migrated downstream into the older tailings impoundment. At Ojancos, the recent upstream tailings have excess of acid potential (7.1 wt.% calcite and 3.5 wt.% pyrite), whereas the older downstream tailings are characterized by alternations of several meter-thick intervals with high neutralizing potential (about 40 wt.% calcite and 2 wt.% pyrite) and intervals with high acid potential (about 3 wt.% calcite and 4 wt.% pyrite). Acid mine drainage (AMD) with the precipitation of schwertmannite (pH 3.15) and chalcoalumite (pH 4.9) flows out at the interface between the uphill and downstream tailings. Strong downstream element transport is taking place and contributes to the formation of the cementation zone (mainly gypsum, ferrihydrite and goethite, and locally jarosite) in the older downstream impoundment. The cementation zone (pH=4) shows strong enrichment of heavy metals (e.g., up to 6800 ppm Cu, 680 ppm Zn, 1100 ppm As), mainly adsorbed and as secondary sulfides (e.g., covellite). In contrast, at the P. Cerda, tailings impoundment carbonates are homogeneously distributed and the overall neutralization potential exceeds the acid potential (average of about 10 wt.% calcite and up to 2.5 wt.% pyrite). The up to 5-m thick oxidation zones (paste pH=6.9–8.3) at P. Cerda are characterized by interlayering of coarser dark gray unoxidized layers with fine-grained, Fe(III) hydroxide-rich, ochre to red-brown colored horizons. The hyperarid climate dries out first the coarse, sulfide-rich horizons of the tailings and limits so the oxidation, which is restricted to the fine-grained, due to their higher moisture retention capacity. However, results indicate that during operation an important element transfer from the younger upstream tailings to the older downstream tailings impoundment took place, possibly by sorptive transport at ferric polymers or colloids in the form of neutral mine drainage (NMD). This would explain the metal enrichments in the cementation zone, which are mainly associated to the exchangeable fraction and not as secondary sulfides. This results, in both cases (in Ojancos mainly as AMD and in P. Cerda mainly as NMD), in Fe(III) input as ferric cation, as ferric polymer, or CO3 complexes to the downstream impoundment. This constitutes a very effective acid potential transfer to the older downstream material because oxidation via input of external Fe(III) produces 16 mol of protons per mol FeS2, i.e., eight times more than via oxidation with oxygen. In addition, the created acidity favors dissolution of the abundant Fe oxides magnetite and hematite of this ore deposit type providing so additional Fe(III) for sulfide oxidation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sequential extraction procedure for the speciation of particulate trace metals
Tessier, A., Campbell, P. G. C., & Bisson, M. (1979) · Analytical Chemistry · doi:10.1021/ac50043a017 · Cited by 12,052
Cited by
Dold, B. (2003) · Journal of Geochemical Exploration · doi:10.1016/s0375-6742(03)00182-1 · Cited by 318
Self-citationAcero, P., Ayora, C., & Carrera, J. (2007) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2007.09.007 · Cited by 53
Multiphase flow and reactive transport model in vadose tailings
Acero, P., Ayora, C., Carrera, J., Saaltink, M. W., & Olivella, S. (2009) · Applied Geochemistry · doi:10.1016/j.apgeochem.2009.03.008 · Cited by 49
Metadata
- Authors
- Dold, B., & Fontboté, L.
- Venue
- Chemical Geology
- Publisher
- Elsevier BV
- Published
- 2002-09
- Volume
- 189
- Issue
- 3-4
- Pages
- 135-163
- ISSN
- 0009-2541 (ISSN-L)
- OpenAlex
- W2134134065
- Cited by
- 171
- References
- 1
- FWCI
- 2.44
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A mineralogical and geochemical study of element mobility in sulfide mine tailings of Fe oxide Cu–Au deposits from the Punta del Cobre belt, northern Chile. https://app.cochat.ai/papers/10.1016/s0009-2541(02)00044-x
- The paper
- Dold, B., & Fontboté, L. (2002). A mineralogical and geochemical study of element mobility in sulfide mine tailings of Fe oxide Cu–Au deposits from the Punta del Cobre belt, northern Chile. Chemical Geology. https://doi.org/10.1016/s0009-2541(02)00044-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.