The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
An adaptive finite element approach to atomic-scale mechanics—the quasicontinuum method
Abstract
Mixed atomistic and continuum methods offer the possibility of carrying out simulations of material properties at both larger length scales and longer times than direct atomistic calculations. The quasicontinuum method links atomistic and continuum models through the device of the finite element method which permits a reduction of the full set of atomistic degrees of freedom. The present paper gives a full description of the quasicontinuum method, with special reference to the ways in which the method may be used to model crystals with more than a single grain. The formulation is validated in terms of a series of calculations on grain boundary structure and energetics. The method is then illustrated in terms of the motion of a stepped twin boundary where a critical stress for the boundary motion is calculated and nanoindentation into a solid containing a subsurface grain boundary to study the interaction of dislocations with grain boundaries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hirth, J. P., & Lothe, J. (1968) · Medical Entomology and Zoology · Cited by 9,770
Numerical Methods for Unconstrained Optimization and Nonlinear Equations
Dennis, J. E., & Schnabel, R. B. (1996) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9781611971200 · Cited by 7,615
The Mathematical Theory of Equilibrium Cracks in Brittle Fracture
Barenblatt, G. I. (1962) · Advances in Applied Mechanics · doi:10.1016/s0065-2156(08)70121-2 · Cited by 5,277
Semiempirical, Quantum Mechanical Calculation of Hydrogen Embrittlement in Metals
Daw, M. S., & Baskes, M. I. (1983) · Physical Review Letters · doi:10.1103/physrevlett.50.1285 · Cited by 2,712
Quasicontinuum analysis of defects in solids
Tadmor, E. B., Ortiz, M., & Phillips, R. (1996) · Philosophical Magazine A · doi:10.1080/01418619608243000 · Cited by 1,507
Self-citationPeierls, R. (1940) · Proceedings of the Physical Society · doi:10.1088/0959-5309/52/1/305 · Cited by 1,491
Interatomic Potentials from First-Principles Calculations: The Force-Matching Method
Ercolessi, F., & Adams, J. B. (1994) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/26/8/005 · Cited by 1,455
Interatomic Potentials from First-Principles Calculations – The Force-Matching MethodPreprint
Ercolessi, F., & Adams, J. B. (1994) · Cited by 1,160
Xu, G., Argon, A. S., & Ortíz, M. (1995) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418619508239933 · Cited by 143
A fast algorithm for generating constrained delaunay triangulations
Sloan, S. W. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90239-a · Cited by 129
Cited by
Mechanical properties of nanocrystalline materials
Meyers, M. A., Mishra, A., & Benson, D. J. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.08.003 · Cited by 4,597
Mechanisms of cement hydration
Bullard, J. W., Jennings, H. M., Livingston, R. A., Nonat, A., Scherer, G. W., Schweitzer, J. S., Scrivener, K. L., & Thomas, J. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.09.011 · Cited by 2,237
Qian, Wagner, A., Liu, W. K., Yu, M.-F., & Ruoff, R. S. (2002) · Applied Mechanics Reviews · doi:10.1115/1.1490129 · Cited by 1,097
Heterogeneous Multiscale Methods: A Review
Weinan, E., Engquist, B., Li, X., Ren, W., & Vanden‐Eijnden, E. (2007) · Communications in Computational Physics · doi:10.4208/cicp.2007.v2.p367 · Cited by 687
The heterogeneous multiscale method
Abdulle, A., Weinan, E., Engquist, B., & Vanden-Eijnden, E. (2012) · Acta Numerica · doi:10.1017/s0962492912000025 · Cited by 581
Metadata
- Authors
- Shenoy, V. B., Miller, R., Tadmor, E. B., Rodney, D., Phillips, R., & Ortiz, M.
- Venue
- Journal of the Mechanics and Physics of Solids
- Publisher
- Elsevier BV
- Published
- 1999-03
- Volume
- 47
- Issue
- 3
- Pages
- 611-642
- ISSN
- 0022-5096 (ISSN-L)
- OpenAlex
- W2081774754
- Cited by
- 658
- References
- 11
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An adaptive finite element approach to atomic-scale mechanics—the quasicontinuum method. https://app.cochat.ai/papers/10.1016/s0022-5096(98)00051-9
- The paper
- Shenoy, V. B., Miller, R., Tadmor, E. B., Rodney, D., Phillips, R., & Ortiz, M. (1999). An adaptive finite element approach to atomic-scale mechanics—the quasicontinuum method. Journal of the Mechanics and Physics of Solids. https://doi.org/10.1016/s0022-5096(98)00051-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.