The DOI matches its Crossref record; the references it cites are not checked yet.
An initial investigation of photocurable three-dimensional lactic acid based scaffolds in a critical-sized cranial defect
Abstract
Degradable polymer networks formed by the photoinitiated polymerization of multifunctional monomers have great potential as in situ forming materials, especially for bone tissue engineering. In this study, one specific chemistry was analyzed with respect to bone formation in a critical-sized defect model with and without adsorbed osteoinductive growth factors present. The scaffolds degraded in approximately 8 months and possessed an elastic modulus similar to that of trabecular bone. A porous scaffold fabricated with approximately 80% porosity and pore diameters ranging from 45 to 150 mm was implanted in a critical-sized cranial defect in rats. When implanted alone, the scaffolds were filled primarily with fibrous tissue after 9 weeks with only mild inflammation at the defect site. When the scaffolds released osteoinductive growth factors, statistically more bone filled the scaffold. For instance, 65.8+/-9.4% (n=5) of the defects were filled with radiopaque tissue in the osteoinductive releasing scaffolds, whereas only 24.2+/-7.4% (n=5) of the defects were filled in the untreated defects 9 weeks after implantation. These results illustrate not only the benefits of delivering osteoinductive factors when developing synthetic bone grafts, but the potential of these materials for supporting the infiltration and development of bone in large defects.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Variation in the methacrylation could lead to less stable structures, more unsolidified residues in the material and open chain ends after photochemical vitrification.”
From In vitro degradation and mechanical properties of PLA-PCL copolymer unit cell scaffolds generated by two-photon polymerization (2016) · cites this paper as [54]
In the citing paper
“This would consequently affect the mechanical properties, cause local acidification and fast degradation of the LC chains due to the lack of complete chain-end-capping with methacrylate groups [54].”
From In vitro degradation and mechanical properties of PLA-PCL copolymer unit cell scaffolds generated by two-photon polymerization (2016) · cites this paper as [54]
Citations
The citation lists are queued
They are fetched later and appear here then.
References 22 · Cited by 102
Metadata
- Authors
- Burdick, J. A., Frankel, D., Dernell, W. S., & Anseth, K. S.
- Affiliations
- University of Colorado Boulder (US)
- Colorado State University (US)
- Howard Hughes Medical Institute (US)
- Corresponding author
- Anseth, Kristi S
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2003-04
- Volume
- 24
- Issue
- 9
- Pages
- 1613-1620
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W1981220452
- Cited by
- 102
- References
- 22
- Citations by year
- 2026: 1 · 2023: 1 · 2022: 4 · 2020: 3 · 2019: 5 · 2018: 4 · 2016: 4 · 2015: 6 · 2014: 3 · 2013: 6 · 2012: 6
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institutes of Health
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR44375-02)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- bone tissue engineering, porous scaffolds, bone regeneration, synthetic bone graft, fibrous tissue formation, elastic modulus
- MeSH terms
- Animals, Elasticity, Growth Substances, Humans, Microscopy, Electron, Scanning, Polyesters, Polymers, Skull, Tensile Strength, Rats, Sprague-Dawley, Bone Substitutes, Lactic Acid, Rats
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An initial investigation of photocurable three-dimensional lactic acid based scaffolds in a critical-sized cranial defect. https://app.cochat.ai/papers/10.1016/s0142-9612(02)00538-0
- The paper
- Burdick, J. A., Frankel, D., Dernell, W. S., & Anseth, K. S. (2003). An initial investigation of photocurable three-dimensional lactic acid based scaffolds in a critical-sized cranial defect. Biomaterials. https://doi.org/10.1016/s0142-9612(02)00538-0
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.