Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record.

Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration

Abstract

We have fabricated porous, biodegradable tubular conduits for guided tissue regeneration using a combined solvent casting and extrusion technique. The biodegradable polymers used in this study were poly(DL-lactic-co-glycolic acid) (PLGA) and poly(L-lactic acid) (PLLA). A polymer/salt composite was first prepared by a solvent casting process. After drying, the composite was extruded to form a tubular construct. The salt particles in the construct were then leached out leaving a conduit with an open-pore structure. PLGA was studied as a model polymer to analyze the effects of salt weight fraction, salt particle size, and processing temperature on porosity and pore size of the extruded conduits. The porosity and pore size were found to increase with increasing salt weight fraction. Increasing the salt particle size increased the pore diameter but did not affect the porosity. High extrusion temperatures decreased the pore diameter without altering the porosity. Greater decrease in molecular weight was observed for conduits manufactured at higher temperatures. The mechanical properties of both PLGA and PLLA conduits were tested after degradation in vitro for up to 8 weeks. The modulus and failure strength of PLLA conduits were approximately 10 times higher than those of PLGA conduits. Failure strain was similar for both conduits. After degradation for 8 weeks, the molecular weights of the PLGA and PLLA conduits decreased to 38% and 43% of the initial values, respectively. However,…

Overview

Integrity signals

Registry

Crossref · 10.1016/s0142-9612(98)00099-4

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Still being checked.

Cited by

See all 398

Metadata

Authors
Widmer, M. S., Gupta, P. K., Lu, L., Meszlenyi, R. K., Evans, G. R. D., Brandt, K., Savel, T., Gurlek, A., Patrick, C. W., & Mikos, A. G.
Affiliations
  • Rice University (US)
  • The University of Texas MD Anderson Cancer Center (US)
Corresponding author
Mikos, Antonios G.
Venue
Biomaterials
Publisher
Elsevier BV
Published
1998-11
Volume
19
Issue
21
Pages
1945-1955
ISSN
0142-9612 (ISSN-L)
OpenAlex
W2048903275
Cited by
372
References
0
Citations by year
2026: 1 · 2025: 2 · 2024: 2 · 2023: 3 · 2022: 8 · 2021: 7 · 2020: 7 · 2019: 9 · 2018: 10 · 2017: 12 · 2016: 11 · 2015: 20 · 2014: 12 · 2013: 9 · 2012: 20
FWCI
8.03
Type
journal article
Language
en
Open access
closed
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations
  • Biomaterials (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • National Institutes of Health (5r29ar042639-03)
  • National Institute of Arthritis and Musculoskeletal and Skin Diseases (R29-AR42639)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
Keywords
guided tissue regeneration, biodegradable polymers, PLGA, poly(L-lactic acid), solvent casting, salt leaching, extrusion, porosity, pore size, extrusion temperature, polymer degradation, mechanical properties, crystallinity, cell seeding, drug delivery, tissue engineering scaffolds
MeSH terms
Polylactic Acid-Polyglycolic Acid Copolymer, Biocompatible Materials, Calorimetry, Differential Scanning, Chemistry, Physical, Microscopy, Electron, Scanning, Particle Size, Polyesters, Polyglycolic Acid, Polymers, Temperature, Porosity, Lactic Acid, Guided Tissue Regeneration, Chemical Phenomena

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration. https://app.cochat.ai/papers/10.1016/s0142-9612(98)00099-4
The paper
Widmer, M. S., Gupta, P. K., Lu, L., Meszlenyi, R. K., Evans, G. R. D., Brandt, K., Savel, T., Gurlek, A., Patrick, C. W., & Mikos, A. G. (1998). Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration. Biomaterials. https://doi.org/10.1016/s0142-9612(98)00099-4

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.