An investigation into the effects of residual water on the glass transition temperature of polylactide microspheres using modulated temperature DSC
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
The objective of the study was to ascertain residual water levels in polylactide and polylactide-co-glycolide microspheres prepared using the solvent evaporation technique and to investigate the effects of that water on the glass transitional behaviour of the microspheres. Microspheres were prepared from polylactic acid (PLA) and polylactide-co-glycolide (PLGA) 50:50 and 75:25 using a standard solvent evaporation technique. The glass transition was measured as a function of drying conditions using modulated temperature DSC. The microspheres were found to contain very low levels of dichloromethane, while residual water levels of up to circa 3% w/w were noted after freeze or oven drying, these levels being higher for microspheres containing higher glycolic acid levels. The residual water was found to lower the T(g) following the Gordon-Taylor relationship. The data indicate that the microparticles may retain significant water levels following standard preparation and drying protocols and that this drying may markedly lower the T(g) of the spheres.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It has been further reported that Tg of PLGAs decrease with a decrease of lactide content in the copolymer composition and with a decrease in molecular weight [13].”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [13]
Citations
Cites
Gordon, M., & Taylor, J. S. (1952) · Journal of Applied Chemistry · doi:10.1002/jctb.5010020901 · Cited by 2,621
Preparation of microspheres by the solvent evaporation technique
O'Donnell, P. B., & McGinity, J. W. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00049-5 · Cited by 806
Hancock, B. C., & Zografi, G. (1994) · Pharmaceutical Research · doi:10.1023/a:1018941810744 · Cited by 714
Witschi, C., & Doelker, E. (1997) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(96)00037-9 · Cited by 206
Aso, Y., Yoshioka, S., LIWANPO, A., & Terao, T. (1994) · Journal of Controlled Release · doi:10.1016/0168-3659(94)90248-8 · Cited by 131
Characterisation of the Glass Transition of an Amorphous Drug Using Modulated DSC
Royall, P. G., Craig, D. Q. M., & Doherty, C. G. (1998) · Pharmaceutical Research · doi:10.1023/a:1011902816175 · Cited by 84
Self-citationThomasin, C., Johansen, P., Alder, R., Bemsel, R., Hottinger, G., Altorfer, H. R., Wright, D. S., Wehrli, G., Merkle, H. P., & Gander, B. A. (1996) · European Journal of Pharmaceutics and Biopharmaceutics · Cited by 60
Investigation of Progesterone Loaded Poly(D,L-Lactide) Microspheres Using TMDSC, SEM and PXRD
Hill, V. L., Passerini, N., Craig, D. Q. M., Vickers, M., Anwar, J., & Feely, L. C. (1998) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1010167214806 · Cited by 26
Self-citationRoyall, P. G., Hill, V. L., Craig, D. Q. M., Price, D. M., & Reading, M. (2001) · Pharmaceutical Research · doi:10.1023/a:1011094611784 · Cited by 18
Self-citation
Cited by
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Makadia, H. K., & Siegel, S. J. (2011) · Polymers · doi:10.3390/polym3031377 · Cited by 4,816
“It has been further reported that Tg of PLGAs decrease with a decrease of lactide content in the copolymer composition and with a decrease in molecular weight [13].”
BackgroundThe mechanisms of drug release in poly(lactic-co-glycolic acid)-based drug delivery systems—A review
Fredenberg, S., Wahlgren, M., Reslow, M., & Axelsson, A. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.05.049 · Cited by 1,286
Freitas, S., Merkle, H. P., & Gander, B. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.10.015 · Cited by 923
PLGA-based nanoparticles: A new paradigm in biomedical applications
Sharma, S., Parmar, A., Kori, S., & Sandhir, R. (2016) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2015.06.014 · Cited by 340
Plasticizing effect of water on poly(lactide-co-glycolide)
Blasi, P., D'Souza, S. S., Selmin, F., & DeLuca, P. P. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.07.009 · Cited by 321
Metadata
- Authors
- Passerini, N., & Craig, D. Q. M.
- Affiliations
- Queen's University Belfast (GB)
- Corresponding author
- Craig, D.Q.M
- Venue
- Journal of Controlled Release
- Publisher
- Elsevier BV
- Published
- 2001-05
- Volume
- 73
- Issue
- 1
- Pages
- 111-115
- ISSN
- 0168-3659 (ISSN-L)
- OpenAlex
- W2021468645
- Cited by
- 165
- References
- 9
- Citations by year
- 2026: 3 · 2025: 5 · 2024: 9 · 2023: 11 · 2022: 4 · 2021: 6 · 2020: 12 · 2019: 12 · 2018: 7 · 2017: 8 · 2016: 9 · 2015: 11 · 2014: 16 · 2013: 4 · 2012: 4
- FWCI
- 1.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Journal of Controlled Release (publishedVersion)
- PubMed (publishedVersion)
- Archivio istituzionale della ricerca (Alma Mater Studiorum Università di Bologna) (submittedVersion)
- UCL Discovery (University College London) (submittedVersion)
- UEA Digital Repository (University of East Anglia) (submittedVersion)
- Topics
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Keywords
- polylactide-co-glycolide, residual water, glass transition temperature, solvent evaporation, drying conditions, freeze-drying, oven drying, temperature-modulated DSC, biodegradable microparticles
- MeSH terms
- Polylactic Acid-Polyglycolic Acid Copolymer, Calorimetry, Differential Scanning, Chemistry, Physical, Desiccation, Drug Carriers, Freeze Drying, Microspheres, Polyesters, Polyglycolic Acid, Polymers, Water, Lactic Acid, Chemical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An investigation into the effects of residual water on the glass transition temperature of polylactide microspheres using modulated temperature DSC. https://app.cochat.ai/papers/10.1016/s0168-3659(01)00245-0
- The paper
- Passerini, N., & Craig, D. Q. M. (2001). An investigation into the effects of residual water on the glass transition temperature of polylactide microspheres using modulated temperature DSC. Journal of Controlled Release. https://doi.org/10.1016/s0168-3659(01)00245-0
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.