The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Microstructural evaluation and tribological properties of underwater friction stir processed CP-copper and its alloy
Abstract
Abstract Underwater friction stir processing was performed on commercially pure copper with a purity of 99.8% and a copper-zinc alloy (brass). The tool was made of tungsten carbide in the threaded cone form. Friction stir processing was performed at a tool rotational speed of 1800 r/min and a tool transverse speed of 4 mm/min while the samples were immersed in a water tank with a water circulation system. In order to evaluate the effect of the number of process passes on the microstructure and mechanical properties of the samples, this process was continued for up to 6 passes. Microscopic studies using light microscopy on commercially pure copper samples show significant decrease in grain size. Likewise, the hardness of the cross-sectional area shows an increase more than the base metal. The X-ray diffraction pattern of the underwater friction stir processed samples in comparison to that of the base metal exhibits shorter and wider peaks, while the background of the pattern is increased. The sum of these factors represents the formation of an amorphous/ultrafine grained structure. Also, the wear behavior of the samples was investigated by means of pin-on-disk method and the results show that the friction coefficient of processed samples is decreased compared to that of the base metal. The results of wear and hardness tests show that the underwater friction stir processing can significantly improve the wear resistance and hardness of commercially pure copper and brass.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, the occurrence of defects at high speed ratio, despite the high heat input, is due to the excessive turbulent flow of materials in the stir zone [48][49][50].”
From Theoretical and experimental studies on fabrication of two-layer aluminum−copper pipe by friction stir additive manufacturing (2021) · cites this paper as [50]
Citations
Cites
Nanostructured materials: basic concepts and microstructure
Gleiter, H. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00285-2 · Cited by 3,045
Friction Stir Processing Technology: A Review
Ma, Z. Y. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-007-9459-0 · Cited by 1,206
Surface composites by friction stir processing: A review
Sharma, V., Prakash, U., & Kumar, B. V. M. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.04.019 · Cited by 607
Patel, V. V., Li, W., Vairis, A., & Badheka, V. (2019) · Critical reviews in solid state and materials sciences/CRC critical reviews in solid state and materials sciences · doi:10.1080/10408436.2018.1490251 · Cited by 298
Wahid, M. A., Khan, Z. A., & Siddiquee, A. N. (2018) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(18)64653-9 · Cited by 176
Zhang, J., Shen, Y., Yao, X., Xu, H., & Li, B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.036 · Cited by 138
Yazdipour, A., M, A. S., & Dehghani, K. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.08.040 · Cited by 123
Patel, V. V., Badheka, V., & Kumar, A. (2016) · Metallography Microstructure and Analysis · doi:10.1007/s13632-016-0285-x · Cited by 97
Patel, V. V., Li, W., & Xu, Y. (2018) · Materials and Manufacturing Processes · doi:10.1080/10426914.2018.1544716 · Cited by 97
Yang, K., Li, W., Huang, C., Yang, X., & Xu, Y. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.03.016 · Cited by 73
Cited by
RETRACTED: Thermo-Mechanical Simulation of Underwater Friction Stir Welding of Low Carbon Steel
Memon, S., Tomków, J., & Derazkola, H. A. (2021) · Materials · doi:10.3390/ma14174953 · Cited by 37
RetractedStudy on Friction and Wear Properties of New Self-Lubricating Bearing Materials
Zhao, L., Li, J., Yang, Q., Wang, Y., Zhang, X., Li, H., Yang, Z., Xu, D., & Liu, J. (2022) · Crystals · doi:10.3390/cryst12060834 · Cited by 31
Khalili, M., Eivani, A. R., Seyedein, S. H., & Jafarian, H. R. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.09.069 · Cited by 31
Patel, M. S., Immanuel, R. J., Rahaman, A., Khan, M. F., & Jouiad, M. (2024) · Crystals · doi:10.3390/cryst14070655 · Cited by 31
Mazaheri, H., Aval, H. J., & Jamaati, R. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.05.018 · Cited by 30
Metadata
- Authors
- MOAREF, A., & RABIEZADEH, A.
- Affiliations
- Islamic Azad University of Shiraz (IR)
- Corresponding author
- RABIEZADEH, A.
- ORCID
- RABIEZADEH, A.
- Venue
- Transactions of Nonferrous Metals Society of China
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 30
- Issue
- 4
- Pages
- 972-981
- ISSN
- 1003-6326 (ISSN-L)
- OpenAlex
- W3021668925
- Cited by
- 32
- References
- 26
- Citations by year
- 2026: 3 · 2025: 5 · 2024: 5 · 2023: 2 · 2022: 8 · 2021: 8 · 2020: 1
- FWCI
- 2.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Transactions of Nonferrous Metals Society of China (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Welding Techniques Analysis
- Physical Sciences › Materials Science › Metals and Alloys › Metallurgy and Material Science
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Keywords
- commercially pure copper, brass, tungsten carbide tools, grain refinement, hardness, wear resistance, friction coefficient, microstructure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructural evaluation and tribological properties of underwater friction stir processed CP-copper and its alloy. https://app.cochat.ai/papers/10.1016/s1003-6326(20)65269-4
- The paper
- MOAREF, A., & RABIEZADEH, A. (2020). Microstructural evaluation and tribological properties of underwater friction stir processed CP-copper and its alloy. Transactions of Nonferrous Metals Society of China. https://doi.org/10.1016/s1003-6326(20)65269-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.