The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A numerical study of granular shear flows of rod-like particles using the discrete element method
Abstract
The effect of particle aspect ratio and surface geometry on granular flows is assessed by performing numerical simulations of rod-like particles in simple shear flows using the discrete element method (DEM). The effect of particle surface geometry is explored by adopting two types of particles: glued-spheres particles and true cylindrical particles. The particle aspect ratio varies from one to six. Compared to frictionless spherical particles, smaller stresses are obtained for the glued-spheres and cylindrical particle systems in dilute and moderately dense flows due to the loss of translational energy, which is partially converted to rotational energy, for the non-spherical particles. For dilute granular flows of non-spherical particles, stresses are primarily affected by the particle aspect ratio rather than the surface geometry. As the particle aspect ratio increases, the effective particle projected area in the plane perpendicular to the flow direction increases, so that the probability of the occurrence of the particle collisions increases, leading to a reduction in particle velocity fluctuation and therefore a decrease in the stresses. Hence, a simple modification is made to the kinetic theory for granular flows to describe the stress tensors for dilute flows of non-spherical particles by incorporating a normalized effective particle projected area to account for the effect of particle collision probability. For dense granular flows, the stresses depend on both the particle aspect ratio and the surface geometry. Sharp stress increases at high solid volume fractions are observed for the glued-spheres particles with large aspect ratios due to the bumpy surfaces, which impede the flow. However, smaller stresses are obtained for the true cylindrical particles with large aspect ratios at high solid volume fractions. This trend is attributed to the combined effects of the smooth particle surfaces and the particle alignments such that the major/long axes of particles are aligned in the flow direction. In addition, the apparent friction coefficient, defined as the ratio of shear to normal stresses, is found to decrease as the particle aspect ratio increases and/or the particle surface becomes smoother at high solid volume fractions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Cited by
Zhong, W., Yu, A., Liu, X., Tong, Z., & Zhang, H. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.07.010 · Cited by 659
Lu, G., Third, J. R., & Müller, C. R. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.11.050 · Cited by 577
Discrete Element Method Simulations for Complex Granular Flows
Guo, Y., & Curtis, J. S. (2015) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-010814-014644 · Cited by 346
Self-citationHaeri, S., Wang, Y., Ghita, O., & Sun, J. (2017) · Powder Technology · doi:10.1016/j.powtec.2016.11.002 · Cited by 322
A review of recent development for the CFD-DEM investigations of non-spherical particles
Ma, H., Zhou, L., Liu, Z., Chen, M., Xia, X., & Zhao, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117972 · Cited by 286
Metadata
- Authors
- Guo, Y., Wassgren, C., Ketterhagen, W., Hancock, B., James, B., & Curtis, J.
- Venue
- Journal of Fluid Mechanics
- Publisher
- Cambridge University Press (CUP)
- Published
- 2012-10-12
- Volume
- 713
- Pages
- 1-26
- ISSN
- 0022-1120 (ISSN-L)
- 1469-7645
- OpenAlex
- W2003503542
- Cited by
- 158
- References
- 1
- FWCI
- 4.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A numerical study of granular shear flows of rod-like particles using the discrete element method. https://app.cochat.ai/papers/10.1017/jfm.2012.423
- The paper
- Guo, Y., Wassgren, C., Ketterhagen, W., Hancock, B., James, B., & Curtis, J. (2012). A numerical study of granular shear flows of rod-like particles using the discrete element method. Journal of Fluid Mechanics. https://doi.org/10.1017/jfm.2012.423
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.