The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Characterization of superhydrophobic surfaces for drag reduction in turbulent flow
Abstract
A significant amount of the fuel consumed by marine vehicles is expended to overcome skin-friction drag resulting from turbulent boundary layer flows. Hence, a substantial reduction in this frictional drag would notably reduce cost and environmental impact. Superhydrophobic surfaces (SHSs), which entrap a layer of air underwater, have shown promise in reducing drag in small-scale applications and/or in laminar flow conditions. Recently, the efficacy of these surfaces in reducing drag resulting from turbulent flows has been shown. In this work we examine four different, mechanically durable, large-scale SHSs. When evaluated in fully developed turbulent flow, in the height-based Reynolds number range of 10 000 to 30 000, significant drag reduction was observed on some of the surfaces, dependent on their exact morphology. We then discuss how neither the roughness of the SHSs, nor the conventional contact angle goniometry method of evaluating the non-wettability of SHSs at ambient pressure, can predict their drag reduction under turbulent flow conditions. Instead, we propose a new characterization parameter, based on the contact angle hysteresis at higher pressure, which aids in the rational design of randomly rough, friction-reducing SHSs. Overall, we find that both the contact angle hysteresis at higher pressure, and the non-dimensionalized surface roughness, must be minimized to achieve meaningful turbulent drag reduction. Further, we show that even SHSs that are considered hydrodynamically smooth can cause significant drag increase if these two parameters are not sufficiently minimized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807 · cited 1×
“…that θ∗ is a weighted average between the contact angle on the wetted surface texture asperities, and the contact angle of air, which is 180◦, or π (Cassie & Baxter 1944), as shown in (2.1): cos θ∗ = rφφs cos θ + (1− φs) cos π. (2.1) Here φs is the ratio of the projected area of the wetted…”
InfluentialTurbulence statistics in fully developed channel flow at low Reynolds number
Kim, J., Moin, P., & Moser, R. (1987) · Journal of Fluid Mechanics · doi:10.1017/s0022112087000892 · Cited by 4,873 · cited 1×
“The PIV analysis of the hydrodynamically smooth, baseline channel is shown to be in good agreement with the mean velocity profiles from the direct numerical simulations (DNS) of Kim et al. (1987).”
Cited by
Samanta, A., Wang, Q., Shaw, S. K., & Ding, H. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108744 · Cited by 275
Wetting States and Departure Diameters of Bubbles on Micro-/Nanostructured Surfaces
Li, J., Gong, S., Zhang, L., Cheng, P., Ma, X., & Hong, F. (2022) · Langmuir · doi:10.1021/acs.langmuir.1c03212 · Cited by 36
Metadata
- Authors
- Gose, J. W., Golovin, K., Boban, M., Mabry, J. M., Tuteja, A., Perlin, M., & Ceccio, S. L.
- Venue
- Journal of Fluid Mechanics
- Publisher
- Cambridge University Press (CUP)
- Published
- 2018-04-27
- Volume
- 845
- Pages
- 560-580
- ISSN
- 0022-1120 (ISSN-L)
- 1469-7645
- OpenAlex
- W2802501268
- Cited by
- 176
- References
- 2
- FWCI
- 5.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of superhydrophobic surfaces for drag reduction in turbulent flow. https://app.cochat.ai/papers/10.1017/jfm.2018.210
- The paper
- Gose, J. W., Golovin, K., Boban, M., Mabry, J. M., Tuteja, A., Perlin, M., & Ceccio, S. L. (2018). Characterization of superhydrophobic surfaces for drag reduction in turbulent flow. Journal of Fluid Mechanics. https://doi.org/10.1017/jfm.2018.210
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.