The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Jet vectoring using synthetic jets
Abstract
The interaction between a conventional rectangular (primary) air jet and a co-flowing synthetic jet is investigated experimentally. The nozzles of both jets have the same long dimension but the aspect ratio of the synthetic jet orifice is 25 times larger. Detailed particle image velocimetry (PIV) measurements of the flow in the midspan plane show that primary jet fluid is directed into the synthetic jet orifice and the interaction between the jets leads to the formation of a closed recirculating flow domain. The concomitant formation of a low-pressure region between the jets results in deflection of the primary jet toward the actuator jet despite the absence of an extended control surface (e.g. a diffuser or collar) and is balanced by a force on the primary jet conduit. For a given synthetic jet strength and primary jet speed, the vectoring force depends mainly on the volume flow rate of primary jet fluid that is diverted into the synthetic jet actuator. This flow rate is regulated by restricting the flow of entrained ambient fluid using a small streamwise extension of the synthetic jet orifice that scales with the orifice width. The response of the primary jet to the imposed vectoring is investigated using stepped modulation of the driving signal. The characteristic vectoring time and vectoring angle decrease monotonically with primary jet speed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Particle Image Velocimetry: A Practical Guide
Raffel, M., Willert, C. E., Scarano, F., Kähler, C. J., Wereley, S. T., & Kompenhans, J. (2018) · doi:10.1007/978-3-319-68852-7 · Cited by 5,049
Particle-Imaging Techniques for Experimental Fluid Mechanics
Adrian, R. J. (1991) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fl.23.010191.001401 · Cited by 3,405 · cited 2×
“Distributions of the two orthogonal velocity components in planar cross-sections of the flow field are obtained from successive image pairs of seed particles (smoke or theatre fog particles of 5–20 µm in diameter introduced at the blower inlet) using cross-correlation algorithms (Adrian 1991).”
MethodOrderly structure in jet turbulence
Crow, S. C., & Champagne, F. H. (1971) · Journal of Fluid Mechanics · doi:10.1017/s0022112071001745 · Cited by 2,188
Gutmark, E. J., & Wygnanski, I. (1976) · Journal of Fluid Mechanics · doi:10.1017/s0022112076001468 · Cited by 524
On the formation of vortex rings: Rolling-up and production of circulation
Didden, N. (1979) · Zeitschrift für angewandte Mathematik und Physik ZAMP · doi:10.1007/bf01597484 · Cited by 403
Glezer, A. (1988) · The Physics of Fluids · doi:10.1063/1.866920 · Cited by 336
Self-citation
Metadata
- Authors
- SMITH, B. L., & GLEZER, A.
- Venue
- Journal of Fluid Mechanics
- Publisher
- Cambridge University Press (CUP)
- Published
- 2002-05-10
- Volume
- 458
- Pages
- 1-34
- ISSN
- 0022-1120 (ISSN-L)
- 1469-7645
- OpenAlex
- W1971836770
- Cited by
- 374
- References
- 6
- FWCI
- 33.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Jet vectoring using synthetic jets. https://app.cochat.ai/papers/10.1017/s0022112001007406
- The paper
- SMITH, B. L., & GLEZER, A. (2002). Jet vectoring using synthetic jets. Journal of Fluid Mechanics. https://doi.org/10.1017/s0022112001007406
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.