Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 176

The DOI matches its Crossref record.

Pressure-forcing of tightly fitting pellets along fluid-filled elastic tubes

Lighthill, M. J.·1968·Journal of Fluid Mechanics

Abstract

Some insight into the behaviour of tightly fitting solid pellets, which may be deformable, and are being forced by a pressure difference to move slowly along a distensible tube filled with viscous fluid, is sought by theoretical study of a simple axisymmetric model (§2). In this, the pellet's clearance in the tube is taken to be a small fraction of the tube radius; the fraction may, at a pressure characteristic of that ahead of the pellet, be either positive or negative. Even if it is positive, the tube may still be distended (or the pellet compressed, or both) as the pellet passes, because the thickness of lubricating film generated may exceed the clearance. Naturally, still greater elastic deformation can occur in the case of negative clearance. Highly simplified elastic properties are assumed; with an eye on tubes occurring in physiological systems (with Poisson's ratio close to 0.5), the local distension of the tube is taken to vary linearly with the local excess pressure; as a still cruder approximation, a similar relation for local reduction of pellet radius is assumed. A parabolic approximation to the pellet's undistorted meridian section, in the region where the lubricating film is thin, is also assumed, leading to a simple relation between pressure and local film thickness which is used, together with Reynolds's lubrication equation, to evaluate both. An arbitrary constant, the rate of leakback of fluid past the pellet, is determined by the condition that the pressure difference forcing the pellet must just balance the skin-frictional resistance to its motion. The problem is non-dimensionalized (§3) and reduced to that of finding a particular solution of a differential equation containing a certain parameter L. In addition to numerical solutions for particular values of L (§6), perturbation solutions for both small and large L are obtained (§§4 and 5), to give mathematical and physical insight; the perturbation for large L (corresponding to negative clearance) is highly singular, requiring the matching of approximate solutions different in each of six different layers. A striking feature of the solutions is a necking of the gap between pellet and tube behind the pellet. This is so pronounced in the case of negative clearance (figure 2) that it might give the false impression that the pellet was being propelled by peristaltic contraction of the tube instead of by fluid pressure gradient. The physical reason for this is elucidated (§6). In the case of positive clearance, rather small pressure differences suffice, on this theory, to propel the pellet, because different parts of the lubricating layer act on it with frictional resistances of different signs, which almost cancel out. By contrast, for negative clearance, the resistance becomes a large multiple of that found in a purely fluid-filled tube of length and mean velocity equal to that of the pellet. This multiple increases, and the film thickness correspondingly decreases (figure 7), as the pellet velocity decreases. One physiological system on which the model may throw some light is the narrow capillary with red blood cells being squeezed through it in single file, lubricated by plasma (§1 and 8). At the higher flow speeds, around 0.1 mm/s, the lubricating film, predicted to be about 0·2μm thick, appears likely to play a significant role in mass transfer to and from the tissue spaces. At much lower speeds, predicted film thicknesses are so small that any of a number of mechanisms, including loss of fluid through the porous capillary wall due to the local excess pressure in the layer, might cause movement to ‘seize up’ altogether.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1017/s0022112068001795

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 176

Metadata

Authors
Lighthill, M. J.
Venue
Journal of Fluid Mechanics
Published
1968-10-16
Volume
34
Issue
1
Pages
113-143
ISSN
  • 0022-1120 (ISSN-L)
  • 1469-7645
OpenAlex
W2090618515
Cited by
176
References
0
FWCI
8.70
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Pressure-forcing of tightly fitting pellets along fluid-filled elastic tubes. https://app.cochat.ai/papers/10.1017/s0022112068001795
The paper
Lighthill, M. J. (1968). Pressure-forcing of tightly fitting pellets along fluid-filled elastic tubes. Journal of Fluid Mechanics. https://doi.org/10.1017/s0022112068001795

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.