The DOI matches its Crossref record.
Enhanced sedimentation in settling tanks with inclined walls
Abstract
Using the principles of continuum mechanics, a theory is developed for describing quantitatively the sedimentation of small particles in vessels having walls that are inclined to the vertical. The theory assumes that the flow is laminar and that the particle Reynolds number is small, but c0, the concentration in the suspension, and the vessel geometry are left arbitrary. The settling rate S is shown to depend upon two dimensionless groups, in addition to the vessel geometry: a sedimentation Reynolds number R, typically O(1)-O(10); and Λ, the ratio of a sedimentation Grashof number to R, which is typically very large. By means of an asymptotic analysis it is then concluded that, as Λ → ∞ and for a given geometry, S can be predicted from the well-known Ponder-Nakamura-Kuroda formula which was obtained using only kinematic arguments. The present theory also gives an expression for the thickness of the clear-fluid slit that forms underneath the downward-facing segment of the vessel walls, as well as for the velocity profile both in this slit and in the adjoining suspension. The sedimentation rate and thickness of the clear-fluid slit were also measured in a vessel consisting of two parallel plates under the following set of conditions: c0 ≤ 0·1, R ∼ O(1), O(10)5 ≤ Λ ≤ O(10 7) and 0° ≤ α ≤ 50°, where α is the angle of inclination. Excellent agreement was obtained with the theoretical predictions. This suggests that the deviations from the Ponder-Nakamura-Kuroda formula reported in the literature are probably due to a flow instability which causes the particles to resuspend and thereby reduces the efficiency of the process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Modeling and numerical simulation of particulate flows by the Eulerian–Lagrangian approach
Patankar, N. A., & Joseph, D. D. (2001) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(01)00021-0 · Cited by 378
Fluid Mechanics of Hydraulic Fracturing: a Review
Osiptsov, A. A. (2017) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2017.05.019 · Cited by 337
Voisard, D., Meuwly, F., Ruffieux, P. ‐., Baer, G., & Kadouri, A. (2003) · Biotechnology and Bioengineering · doi:10.1002/bit.10629 · Cited by 261
A new method to select demulsifiers and optimize dosage at wet crude oil separation facilities
Raynel, G., Salomon Marques, D., Al-Khabaz, S., Al-Thabet, M., & Oshinowo, L. (2021) · Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles · doi:10.2516/ogst/2020096 · Cited by 18
Metadata
- Authors
- Acrivos, A., & Herbolzheimer, E.
- Venue
- Journal of Fluid Mechanics
- Publisher
- Cambridge University Press (CUP)
- Published
- 1979-06-12
- Volume
- 92
- Issue
- 3
- Pages
- 435-457
- ISSN
- 0022-1120 (ISSN-L)
- 1469-7645
- OpenAlex
- W2161970789
- Cited by
- 208
- References
- 0
- FWCI
- 13.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced sedimentation in settling tanks with inclined walls. https://app.cochat.ai/papers/10.1017/s0022112079000720
- The paper
- Acrivos, A., & Herbolzheimer, E. (1979). Enhanced sedimentation in settling tanks with inclined walls. Journal of Fluid Mechanics. https://doi.org/10.1017/s0022112079000720
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.