The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Stable Cationic Capillary Coating with Successive Multiple Ionic Polymer Layers for Capillary Electrophoresis
Abstract
A coated capillary modified with a cationic polymer was developed by using a novel coating procedure, successive multiple ionic-polymer (SMIL) coating. The SMIL coating was achieved by first attaching the cationic polymer to the capillary inner wall, and then the anionic polymer to the cationic polymer layer, and finally the cationic polymer to the anionic polymer layer. The stability of Polybrene (PB)-modified capillary made by SMIL coating was remarkably improved in comparison with a conventional PB-modified capillary. It endured during 600 replicate analyses and also showed strong stability against 1 M NaOH and 0.1 M HCl. The relative standard deviation of the run-to-run, day-to-day, and capillary-to-capillary coating was all below 1%, and good reproducibilities were obtained. The PB-modified capillary made by SMIL coating was applied to the basic protein analyses. It gave good performances for the protein analyses even when the pH of the electrolyte was near the isoelectric point (pI) of the protein. In addition, 0.1 M NaOH rinse prior to the sample injection allowed the reproducible analysis of a highly adsorptive sample such as plasma because the adsorbed sample could be flushed out of the capillary. Besides protein analyses, an efficient analysis of the cationic drugs by capillary electrophoresis/mass spectrometry (CE/MS) was also possible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zone electrophoresis in open-tubular glass capillaries
Jorgenson, J. W., & Lukacs, K. D. (1981) · Analytical Chemistry · doi:10.1021/ac00231a037 · Cited by 2,229
High-performance electrophoresis
Hjertén, S. (1985) · Journal of Chromatography A · doi:10.1016/s0021-9673(01)95485-8 · Cited by 1,513
Capillary Zone Electrophoresis
Jorgenson, J. W., & Lukacs, K. D. (1983) · Science · doi:10.1126/science.6623076 · Cited by 1,289
Gilges, M., Kleemiss, M. H., & Schomburg, G. (1994) · Analytical Chemistry · doi:10.1021/ac00085a019 · Cited by 331
Noncovalent Polycationic Coatings for Capillaries in Capillary Electrophoresis of Proteins
Córdova, E., Gao, J., & Whitesides, G. M. (1997) · Analytical Chemistry · doi:10.1021/ac960432l · Cited by 207
Figeys, D., van Oostveen, I., Ducret, A., & Aebersold, R. H. (1996) · Analytical Chemistry · doi:10.1021/ac960191h · Cited by 135
Control of electroosmosis in coated quartz capillaries
Herren, B. J., Shafer, S. G., Alstine, J. M. V., Harris, J. M., & Snyder, R. S. (1987) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(87)90007-5 · Cited by 114
Figeys, D., & Aebersold, R. H. (1997) · Journal of Chromatography B Biomedical Sciences and Applications · doi:10.1016/s0378-4347(97)00022-4 · Cited by 43
Cited by
Technology-driven layer-by-layer assembly of nanofilms
Richardson, J. J., Björnmalm, M., & Caruso, F. (2015) · Science · doi:10.1126/science.aaa2491 · Cited by 1,641
Innovation in Layer-by-Layer Assembly
Richardson, J. J., Cui, J., Björnmalm, M., Braunger, J. A., Ejima, H., & Caruso, F. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00627 · Cited by 922
Soga, T., Baran, R., Suematsu, M., Ueno, Y., Ikeda, S., Sakurakawa, T., Kakazu, Y., Ishikawa, T., Robert, M., Nishioka, T., et al. (2006) · Journal of Biological Chemistry · doi:10.1074/jbc.m601876200 · Cited by 740
Surface modification of poly(dimethylsiloxane) microchannels
Makamba, H., Kim, J. H., Lim, K., Park, N., & Hahn, J. H. (2003) · ELECTROPHORESIS · doi:10.1002/elps.200305627 · Cited by 551
Wong, I., & Ho, C.-M. (2009) · Microfluidics and Nanofluidics · doi:10.1007/s10404-009-0443-4 · Cited by 531
Metadata
- Authors
- Katayama, H., Ishihama, Y., & Asakawa, N.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-10-31
- Volume
- 70
- Issue
- 24
- Pages
- 5272-5277
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W1965819236
- Cited by
- 264
- References
- 8
- FWCI
- 4.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.