The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Recent Progress in Chlorinated Organic Photovoltaic Materials
Abstract
ConspectusOver the past few years, the development of new materials has contributed to rapid increases in the power conversion efficiencies (PCEs) of organic photovoltaic (OPV) cells to over 17%, showing great potential for the commercialization of this technology in the near future. At this stage, designing new materials with superior performance and low cost simultaneously is of crucial importance. Chlorinated materials are emerging as new stars with very high PCEs, creating a molecular design trend to replace the most popular fluorinated materials. For example, by using chlorinated non-fullerene acceptors, we recently got a record PCE of 17% for single-junction OPV cells. Firmly based on recent advances, herein we focus on the topic of chlorinated OPV materials, aiming to provide a guideline for further molecular design.In this Account, first, on the basis of most fundamental features of the Cl atom, we highlight the features of chlorinated materials compared with their fluorinated counterparts: (1) Chlorination is more efficient than fluorination in modulating the optical and electrical properties of OPV materials. In many cases, chlorinated materials show lower energy levels and broader absorption spectra than their fluorinated counterparts, which contribute higher output voltages and current densities in the resulting photovoltaic devices. (2) Cl has a large atomic size than F. On one hand, enhanced overlap of π electrons is beneficial for enhancing the intermolecular packing and crystalline property and thus improving the charge transport. On the other hand, if Cl is introduced inappropriately in the backbone or side chain, this feature will cause a more twisted π plane and larger steric hindrance, having negative impacts on the photovoltaic performance of the corresponding materials. (3) Importantly, chlorination is usually chemically cheaper in synthesis, which has the potential to decrease the material cost of OPV cells. Then, we provide a concise review of chlorinated OPV materials, including polymeric and small-molecule donors and non-fullerene acceptors. The photovoltaic performance in various types of OPV cells using chlorinated materials, such as single-junction, tandem, semitransparent, and indoor-light photovoltaic cells is also discussed. For instance, ultranarrow-band-gap chlorinated acceptors can be used to construct highly efficient color-semitransparent OPV cells, and the wide-band-gap chlorinated materials show great potential for fabricating indoor-light photovoltaic devices. Finally, we briefly discuss current questions related to chlorinated OPV materials and highlight the significance of chlorination in future development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yuan, J., Zhang, Y., Zhou, L., Zhang, G., Yip, H.-L., Lau, T.-K., Lu, X., Zhu, C., Peng, H., Johnson, P. A., et al. (2019) · Joule · doi:10.1016/j.joule.2019.01.004 · Cited by 5,883
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Lin, Y., Wang, J., Zhang, Z., Bai, H., Li, Y., Zhu, D., & Zhan, X. (2015) · Advanced Materials · doi:10.1002/adma.201404317 · Cited by 4,258
Self-citationOrganic and solution-processed tandem solar cells with 17.3% efficiency
Meng, L., Zhang, Y., Wan, X., Li, C., Zhang, X., Wang, Y., Ke, X., Xiao, Z., Ding, L., Xia, R., et al. (2018) · Science · doi:10.1126/science.aat2612 · Cited by 2,527
Cui, Y., Yao, H., Zhang, J., Zhang, T., Wang, Y., Hong, L., Xian, K., Xu, B., Zhang, S., Peng, J., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10351-5 · Cited by 1,712
Self-citationBeaujuge, P. M., & Fréchet, J. M. J. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2073643 · Cited by 1,427
Baran, D., Ashraf, R. S., Hanifi, D. A., Abdelsamie, M., Gasparini, N., Röhr, J. A., Holliday, S., Wadsworth, A., Lockett, S., Neophytou, M., et al. (2017) · Nature Materials · doi:10.1038/nmat4797 · Cited by 1,027
Flexible, highly efficient all-polymer solar cells
Kim, T., Kim, J.-H., Kang, T. E., Lee, C., Kang, H., Shin, M., Wang, C., Ma, B., Jeong, U., Kim, T.-S., et al. (2015) · Nature Communications · doi:10.1038/ncomms9547 · Cited by 861
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Organic Photovoltaics over Three Decades
Inganäs, O. (2018) · Advanced Materials · doi:10.1002/adma.201800388 · Cited by 708
Halogenated Materials as Organic Semiconductors
Tang, M. L., & Bao, Z. (2011) · Chemistry of Materials · doi:10.1021/cm102182x · Cited by 625
Zhou, Z., Xu, S., Song, J., Jin, Y., Yue, Q., Qian, Y., Liu, F., Zhang, F., & Zhu, X. (2018) · Nature Energy · doi:10.1038/s41560-018-0234-9 · Cited by 625
Organic photovoltaic cell with 17% efficiency and superior processability
Cui, Y., Yao, H., Hong, L., Zhang, T., Tang, Y., Lin, B., Xian, K., Gao, B., An, C., Bi, P., et al. (2020) · National Science Review · doi:10.1093/nsr/nwz200 · Cited by 568
Self-citationCui, Y., Wang, Y., Bergqvist, J., Yao, H., Xu, Y., Gao, B., Yang, C., Zhang, S., Inganäs, O., Gao, F., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0448-5 · Cited by 553
Self-citationDesign strategies for organic semiconductors beyond the molecular formula
Henson, Z. B., Müllen, K., & Bazan, G. C. (2012) · Nature Chemistry · doi:10.1038/nchem.1422 · Cited by 548
Diketopyrrolopyrrole Polymers for Organic Solar Cells
Li, W., Hendriks, K. H., Wienk, M. M., & Janssen, R. A. J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00334 · Cited by 518
Che, X., Li, Y., Qu, Y., & Forrest, S. R. (2018) · Nature Energy · doi:10.1038/s41560-018-0134-z · Cited by 489
Simple non-fused electron acceptors for efficient and stable organic solar cells
Yu, Z.-P., Liu, Z.-X., Chen, F.-X., Qin, R., Lau, T.-K., Yin, J.-L., Kong, X., Lu, X., Shi, M., Li, C.-Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10098-z · Cited by 477
Kang, H., Lee, W., Oh, J., Kim, T., Lee, C., & Kim, B. J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00347 · Cited by 442
Zhang, M., Guo, X., Zhang, S., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201304427 · Cited by 425
Self-citationCui, Y., Yang, C., Yao, H., Zhu, J., Wang, Y., Jia, G., Gao, F., & Hou, J. (2017) · Advanced Materials · doi:10.1002/adma.201703080 · Cited by 388
Self-citationTailor-Made Rylene Arrays for High Performance n-Channel Semiconductors
Jiang, W., Li, Y., & Wang, Z. (2014) · Accounts of Chemical Research · doi:10.1021/ar500240e · Cited by 382
The Curious Case of Fluorination of Conjugated Polymers for Solar Cells
Zhang, Q., Kelly, M. A., Bauer, N., & You, W. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00326 · Cited by 379
All-Small-Molecule Organic Solar Cells with an Ordered Liquid Crystalline Donor
Chen, H., Hu, D., Yang, Q., Gao, J., Fu, J., Yang, K., He, H., Chen, S., Kan, Z., Duan, T., et al. (2019) · Joule · doi:10.1016/j.joule.2019.09.009 · Cited by 351
Transparent Polymer Photovoltaics for Solar Energy Harvesting and Beyond
Chang, S.-Y., Cheng, P., Li, G., & Yang, Y. (2018) · Joule · doi:10.1016/j.joule.2018.04.005 · Cited by 309
Fan, Q., Zhu, Q., Xu, Z., Su, W., Chen, J., Wu, J., Guo, X., Ma, W., Zhang, M., & Li, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.002 · Cited by 289
Bronstein, H., Frost, J. M., Hadipour, A., Kim, Y., Nielsen, C. B., Ashraf, R. S., Rand, B. P., Watkins, S., & McCulloch, I. (2013) · Chemistry of Materials · doi:10.1021/cm301910t · Cited by 239
Heat-Insulating Multifunctional Semitransparent Polymer Solar Cells
Sun, C., Xia, R., Shi, H., Yao, H., Liu, X., Hou, J., Huang, F., Yip, H.-L., & Cao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.06.006 · Cited by 237
Self-citationYang, F., Li, C., Lai, W., Zhang, A., Huang, H., & Li, W. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00025a · Cited by 191
Chlorine Atom-Induced Molecular Interlocked Network in a Non-Fullerene Acceptor
Qu, J., Chen, H., Zhou, J., Lai, H., Liu, T., Chao, P., Li, D., Xie, Z., He, F., & Ma, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15923 · Cited by 134
Fluorinated Thiophene Units Improve Photovoltaic Device Performance of Donor–Acceptor Copolymers
Zhang, Q., Yan, L., Jiao, X., Peng, Z., Liu, S., Rech, J. J., Klump, E. D., Ade, H. W., So, F. F., & You, W. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01683 · Cited by 70
Cited by
Dong, Y., Shen, W., Dong, W., Bai, C., Zhao, J., Zhou, Y., Huang, F., Cheng, Y., & Zhong, J. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200417 · Cited by 274
Zhao, Z.-W., del Cueto, M., Geng, Y., & Troisi, A. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02325 · Cited by 102
Metadata
- Authors
- Yao, H., Wang, J., Xu, Y., Zhang, S., & Hou, J.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-03-27
- Volume
- 53
- Issue
- 4
- Pages
- 822-832
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W3013824805
- Cited by
- 274
- References
- 31
- FWCI
- 15.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.